Error when Running a software update

I was running the software update button on my mac book pro. It was almost finished then my mac went to the blank grey screen with the apple logo in the middle. There is a loading circle beneath the apple logo. It is still moving, but it has been doing this for over an hour and a half now. What do I do?

Argh ... the 10.4.9 update can take a few minutes at restart, but it shouldn't take that long. I think you're going to have to hold the Power button until it shuts down ...
Some people have been unable to restart their Mac after this update failure so be prepared to use the Install DVD and try booting from that (hold C at start) if it won't start normally.
When you come to updating again use the COMBO updater not the smaller DELTA one ...

Similar Messages

Fatal error when searching for software update

When i go to look for software updates, the list appears empty. When i go into system preferences and click on software update it says "last attempt failed. Fatal error occurred while checking. Not sure what to do here, my mac hasn't been updated in years.

@Fleet07
Just realized that you have the Verizon Z3, you can't unlock the bootloader, what if you use PCC?
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Data Services 4.0 error when running job - not updating repository table

Hi All,
I am hoping someone might have come across this error before.
When running a data services job, from within Data Services Designer, when trying to re-run the same job, I get the following error messages:
9332     2572     DBS-070300     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
9332     2572     DBS-070300     17/10/2011 10:38:39 AM     SQL submitted to Oracle Server <BO3> resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
9332     2572     DBS-070300     17/10/2011 10:38:39 AM     >. The SQL submitted is <INSERT INTO AL_BW_REQUEST (REQUESTID,TYPE,VALUE,DF_NAME,CREATION_TIME) VALUES (
9332     2572     DBS-070300     17/10/2011 10:38:39 AM     'REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU', 3 , '29', 'DF_XXXX_Data_DW1Date', to_date('2011.10.17 10:38:39', 'yyyy.mm.dd
9332     2572     DBS-070300     17/10/2011 10:38:39 AM     hh24:mi:ss') )>.
9332     2572     REP-100109     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
9332     2572     REP-100109     17/10/2011 10:38:39 AM     Cannot save <RequestID info> into the repository. Additional database information: <SQL submitted to Oracle Server <BO3>
9332     2572     REP-100109     17/10/2011 10:38:39 AM     resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
When I go and look into the Data Services repository AL_BW_REQUEST table, the first time the job is run, all five fields in this table populate with data successfully. When re-running the job, on 3 out of the five fields within this table are populated but the VALUE and DF_NAME field are not populated, hence causing the primary key violation.
Here is the data below from the AL_BW_REQUEST table:
REQUESTID                                      TYPE VALUE     DF_NAME                               CREATION_TIME
REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU     3                      10/17/2011 10:38:38 AM
REQU_4NJ503RVIFD3VLBJJEKBJ3OE2     3                       10/17/2011 10:33:37 AM
REQU_4NJ4ZHSP9F93L3OAUDV6RHCMY     3                       10/17/2011 10:32:31 AM
REQU_4NIV1NKP9645E394E7H12Q796     3                      10/17/2011 9:53:53 AM
REQU_4NEYFNI2U68MBJOEWFJWVWWU2     3 24     DF_XXXX_Data_DW1Date      10/17/2011 9:47:58 AM
If I truncate this table and re-run the DS job, it will not populate the VALUE and DF_NAME fields.
Does anyone know what could be causing this? The target source is BW.
Seems like a bug to me.
Thanks,
Ainsley

Hi Ramesh,
Am a HANA apps consultant in India, would like to get in touch with you. but don't know how
regards,
Tilak

In running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used.

While running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used. Can somebody help me resolve this error message. Would this error affect my ability to run FaceTime ?

Seems pretty clear to me. Here's what you can try:
Open Terminal in your Utilities folder. Paste the following at the prompt:
sudo chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext
Press RETURN. Enter admin password when prompted. It will not be echoed so type carefully. Press RETURN again.
Restart the computer.

HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8. How do I get that? When I run a software update, system says there is none. Help

Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
(73181)

Getting error message "The ipad software update server could not be contacted. You do not have enough access privleges for this operation" When trying to restor ipad mini

When I try to restor my ipad mini I get the error message "Te ipad software update server could not be contacted. You do not have enough access privleges for this operation." Please help!!

I also have same problem i dont knw what to do ???????????????? have u got any solution >>????

My Cosmos says network error when I try to update the software

Can someone help me understand why my lg cosmos says network error when I try to update the software? Thank you!

Imeans, this is kind of odd! The Cosmos, hasn't had any new updates to come out. I can look further into this for you. Which Cosmos do you have? Also, what zip code are you in? VanetrisC_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

When downloading Iphone software update (version 4.0), I get error message

When downloading Iphone software update (version 4.0), I get error message (stopped err = -3259). Is there a solution for this???

Did anyone solve this?
I'm still having this issue. I also had the same issue when trying to download a large update for an app (43MB). I can download and install smaller udpates but I can't even download the large updates. I've checked all of my firewall settings and they are fine. I've turned off the firewall when trying to download the update and it still does not work. It just keeps saying that my network connection timed out.
I'm not at the stage where I can't install new apps because it requires the latest OS version on my iphone which I can't get!

HT4623 When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

When I try to update my iPad 3 4g to iOS 5.1.1, i keep getting error trying to find software update, I've tried several things already, but nothing seems to work.

Perhaps, iTunes can't communicate with the Apple uodate servers. Temporarily disabling your firewall and antivirus software would help. Take a look at this.
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?

Since this morning when I try Software Updates and then Updates, I get a consistent message - An Error has occurred, The operation couldn't be completed. (NSURLErrorDomain error - 1012). Is this a server error and what do I do next?
Please help!!!!!

Wait until Apple fixes this server issue.
Best.

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error downloading iTunes in software update

Im having problems with software update im trying to update two machines one is running 10.6 and one is 10.7 and i was downloading the update and got the same error message at the end of each download that itunes file was corrupted and would redownload when i reran software update but each time i re run it I get the same error message. I want to know if there is a way to reset the download
thanks

Luckily, there are more than one way to download/install software...
http://support.apple.com/downloads/#itunes

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Corba error when running rich clients in 3-tier mode.

Hello
I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
My setup is:
BO XI R 3.1 FP. 2.1
Clients are also updated with FP 2.1
The data sources are Oracle and Teradata.
Best regards,
Hjortur.

Hi Guys,
I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
I would like to appreciate if someone help me out for the same.
Thanks in advance..!!
Thanks & Regards,
Keyur Modi | Functional Consultant Enterprise Solutions
TATA Technologies, Pune
m: +91-9769855899
website: www.tatatechnologies.com

MacBookPro won't download updates. No error message. Using Software Update. Gray box just turns a lighter shade of gray

MacBookPro won't download updates. No error message. Using Software Update-not using App. Gray button just turns a lighter shade of gray and just sits there. Have done previous downloads last one on Jan.9 for desktop and two others.

So I've realized that iTunes needs service pack 2 for
XP, and I have 1, so I'm trying to download it, but
that's not working either... I wonder if you know
windows as well as apple? I have to turn the Active
x controls on and this tool bar is to appear so I can
do that but I can't get it to appear. I've tried
raising the security settings but nothing appears...
interesting.................what is service pack 2 and where can i find it? My itunes still flickers on and off when i attempt to use it. .. and how do i get to the active X controls so that i can adjust them? Thank you guys so much for your time and assistance :-D

Error when Running a software update

Similar Messages

Maybe you are looking for