Error when running MMO game on my Mac

The MMO game from the website I downloaded is not working on my mac.
I'm on a Mac Snow Leopard. Help would very much be appreciated.
Please advise.

You've got to be kidding, right? How do you expect us to help if you don't give us the name of the game or tell us how it isn't working? For that matter, this would be more appropriately asked on a forum related to the game.

Similar Messages

  • Verification error when run the game after download the jad/jar by OTA on BB 8300

    On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
    I check the article "Support - MIDlet has verification error at offset", and have no harvest.
    BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
    How to fix the bug?
    Thanks for your help.

    Hello,
    I gather for your lack of details that you are wanting to get an application that you have written working on the device?
    Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
    Lacking this however, the software needs to be fixed.
    You'll have better luck looking on the Java forums, not here...
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • No method 'imageDelete' Error when running node azure cli on Mac

    I receive the following error when I try to run any azure command:
    Mon Jul 14 2014 12:53:16 GMT-0400 (EDT):
    [TypeError: Object #<Object> has no method 'imageDelete']
    TypeError: Object #<Object> has no method 'imageDelete'
    at Object.exports.init (/usr/local/lib/node_modules/azure-cli/lib/commands/asm/vm._js:552:247)
    at /usr/local/lib/node_modules/azure-cli/lib/cli.js:598:52
    at Array.forEach (native)
    at AzureCli._.extend.harvestPlugins (/usr/local/lib/node_modules/azure-cli/lib/cli.js:598:17)
    at new AzureCli (/usr/local/lib/node_modules/azure-cli/lib/cli.js:59:10)
    at Object.<anonymous> (/usr/local/lib/node_modules/azure-cli/bin/azure.js:19:11)
    at Module._compile (module.js:456:26)
    at Object.Module._extensions..js (module.js:474:10)
    at Module.load (module.js:356:32)
    at Function.Module._load (module.js:312:12)
    I have tried uninstalling the azure cli and reinstalling it but that did not help.
    Any help would be appreciated.

    Hi,
    Please download azure command-line at:
    http://go.microsoft.com/fwlink/?linkid=253471&clcid=0x409, before install it, I suggest you have a look at this article:
    http://azure.microsoft.com/en-us/documentation/articles/xplat-cli/, hope this helps.
    Best Regards,
    Jambor 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error when running a game in Windows

    I installed SW Galactic Battlegrounds on my Windows partition (which I created using Boot Camp), which is running XP SP2. It played fine until a few minutes into the game, when it just randomly quit, giving the error message "Windows has encountered an error and must close." It exited the game, but the music is still playing in the background. However, no trace of it remains in Task Manager (go figure). I downloaded and installed the patch for the game, but it hasn't helped. I checked the system requirements, and it only requires 32MB of RAM (the game's a classic, what can I say). I'm not running any other programs. Basically, I have no idea why the game keeps quitting randomly, but it seems that no matter what I try, it still creates this error. Any ideas?

    Well, I contacted Lucasarts about this problem, and all they could say is that "This product is not currently supported using the Apple Boot Camp Application." That doesn't make sense to me. If it's installed on a Windows partition, shouldn't it be able to run? Is there something technical going on, because Windows is running on a Mac machine, that would prevent the game from being able to run properly?

  • HotSpot JVM InternaL Error when running on Mac OS X

    I am getting the following error when running a Java process on Mac OS X 10.1.3. This
    occurs after runing the process for a few hours. What could be the probable causes for
    the same. The error message is given below:
    # HotSpot Virtual Machine Error, Internal Error
    # Please report this error at
    # http://bugreport.apple.com/
    # Error ID: /SourceCache/HotSpot/HotSpot-48/src/os/macosx/vm/os_macosx.cpp, 369
    # Problematic Thread: prio=5 tid=0x4e31e80 nid=0x1975a50 runnable
    Internal Error
    Fatal: error setting thread exception port
    Do you want to debug the problem?
    *** malloc[1439]: error: Can't allocate region

    I am getting the same error, while trying to debug on Windows XP.
    I can reproduce it every time, but can't find much info about it.
    Starting service Tomcat-Netbeans
    Apache Tomcat/4.0.1
    # HotSpot Virtual Machine Error, Internal Error
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.1-b21 mixed mode)
    # Error ID: 5052455345525645255843455054494F4E0E435050001B
    # Problematic Thread: prio=5 tid=0x0F229638 nid=0xb80 runnable

  • Error when running Stellarium with Intel GPU

    I'm trying to run Stellarium on a 2009 desktop computer with an Intel GPU, but I get the following error message:
    Your OpenGL subsystem has problems. See log for details. Ignore and suppress this notice in the future and try to continue in degraded mode anyway?
    This is the log file:
    2015-02-02T20:03:51
    Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
    Compiled using GCC 4.9.2
    Qt runtime version: 5.4.0
    Qt compilation version: 5.4.0
    Addressing mode: 64-bit
    MemTotal: 8101092 kB
    MemFree: 154528 kB
    MemAvailable: 4217808 kB
    SwapTotal: 0 kB
    model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
    cpu MHz : 2997.000
    model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
    cpu MHz : 2997.000
    00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
    Kernel driver in use: i915
    stellarium
    [ This is Stellarium 0.13.2 - http://www.stellarium.org ]
    [ Copyright (C) 2000-2014 Fabien Chereau et al ]
    Writing log file to: "/home/fturco/.stellarium/log.txt"
    File search paths:
    0 . "/home/fturco/.stellarium"
    1 . "/usr/share/stellarium"
    Config file "/home/fturco/.stellarium/config.ini" does not exist. Copying the default file.
    Config file is: "/home/fturco/.stellarium/config.ini"
    Detected: OpenGL "2.1"
    Driver version string: "2.1 Mesa 10.4.3"
    GL vendor is "Intel Open Source Technology Center"
    GL renderer is "Mesa DRI Intel(R) Q35 "
    GL Shading Language version is "1.20"
    MESA Version Number after parsing: 10.4
    Mesa version is fine, we should not see a graphics problem.
    GLSL Version Number after parsing: 1.2
    This is not enough: we need GLSL1.30 or later.
    You should update graphics drivers, graphics hardware, or use the MESA version.
    Else, please try to use an older version like 0.12.4, and try there with --safe-mode
    You can try to run in an unsupported degraded mode by ignoring the warning and continuing.
    But more than likely problems will persist.
    Aborting due to OpenGL/GLSL version problems.
    I'm using xf86-video-intel version 2.99.917-1 at the moment.
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
    I also get extremely slow performances when running 3D game Xonotic, but I don't know if it's due to the same problem. Any suggestion?

    It seems that my GPU (Intel GMA 3100) is not supported anymore. See https://answers.launchpad.net/stellarium/+faq/2570: "Graphics cards which are no longer supported by Stellarium 0.13 and later include early ATI/AMD Radeon cards up to and including the Xxxx series (built 2004/05), NVidia up to GeForce FXxxx (2003/04), and Intel GMA before X3000, unfortunately also including the popular Atom-based netbooks of 2010."

  • ADT packaging with native extensions : permission denied error when running remote build.

    Hi Team,
    We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
    ant -Djava.awt.headless=true -f build.xml buildPackage
    When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
    Can anybody please help how to get rid of this issue for nightly build using adt,jar?
    Here is the error from build log:
    buildiOSPackageWithNativeExtensionMac:
         [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
         [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
         [java]  at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         [java]  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
         [java]  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
         [java]  at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         [java]  at java.lang.System.loadLibrary(System.java:1045)
         [java]  at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
         [java]  at java.security.AccessController.doPrivileged(Native Method)
         [java]  at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
         [java]  at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
         [java]  at java.awt.Dimension.<clinit>(Dimension.java:70)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
         [java]  at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
         [java]  at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
         [java]  at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
         [java]  at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
         [java]  at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
         [java]  at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
         [java]  at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
         [java]  at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
         [java]  at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
         [java]  at com.adobe.air.ADT.run(ADT.java:414)
         [java]  at com.adobe.air.ADT.main(ADT.java:464)
    Thanks,
    Swathi.

    Note: Before the above error that were two other errors .
    1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
    2) The build complained that dx could not be found.
    The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
    The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

  • Spinning beach ball of death - Error when running Chrome - kernel: IOSurface: buffer allocation size is zero

    I get the following error when running Chrome v18.0.1025.163 on my MacBook Pro with MacOS 10.7.3
    kernel: IOSurface: buffer allocation size is zero
    I have had many tabs crash, then it crashes the Chrome application, then quickly making my entire Mac unresponsive with a spinning beach ball of death.  I am not sure if it is Chrome or not, as I tend to do most of my work these days in a browser. 
    Have others seen this?  Is there a fix?  What can I do to stop these crashes?

    As far as I've been able to discover, this bug is specific to WebKit browsers running (Chrome and Safari are based on WebKit).  Perhaps it is related to those browsers running plugins (like Flash) and using an IOSurface to pass the rendering data back from the plugin.  This issue was constant on my late 2010 MBP and would freeze the machine entirely once a day.  Having switched to using Firefox or Opera I no longer see ANY messages for "IOSurface: Buffer allocation size is zero".  Thankfully, this also comes without any more freezing when time machine starts up or at any other time.
    It looks like there are a lot of changes going on in WebKit relating to IOSurface usage (http://svnsearch.org/svnsearch/repos/WEBKIT/search?logMessage=iosurface).  Hopefully this will be fixed very soon.

  • Syntax error when running ActionFileToXML.jsx or trying to install xtools

    I have an action set (actually a few) that I would REALLY love to rename but the actions are calling "sub" actions within the action set which means that the action set name is hard-coded into the actions in many places.
    Originally, I tried to edit my actions with a hex editor to try and change the name and references but realised I was limited to renaming with the same number of characters unless I parsed the file first... so I gave up on that. Then I came across Xbytor's awesome ActionFileToXML script, but I get a syntax error when running both the To and From XML scripts at root.@date = Stdlib.toISODateString();
    I then figured I would go straight for the latest xtools instead but when running the install (in CS2) I get a rather long syntax error and so the install fails. The script mentioned that there is a log file that I should email to Xbytor, but I figured I would post here instead of bothering him directly so he has more of a choice about whether he wants to be bothered by me Or maybe someone else can answer if it is a stupid newbie problem.
    Thanks heaps!
    Gab
    ETA: I'm running CS2 on XP if that makes any difference. If so, I may be able to use a friend's Mac with CS3.

    Thanks for the quick (and very useful) response!
    I made the changes to the mentioned files and the scripts were able to
    progress further, but only until the next E4X syntax (node.@key=key;).
    Rather than continue to hack at your code, I figured I should downgrade to a
    previous version (as you also suggested).  I initially tried v1.5 and the
    ActionFileToXML worked perfectly but ActionFileFromXML failed with an
    illegal argument error.
    Before looking too deeply into the error, I figured I would try v1.6 and
    found that both the scripts were able to complete successfully. The
    resulting atn file has a couple of bugs in it (such as "Set current layer"
    having a knockout setting of  which causes the action to crash),
    but nothing that I can't just copy back from my original script.
    Thanks HEAPS for your assistance and for the awesome scripts in the first
    place! Extremely greatly appreciated!

  • Error when running a report in BPC NW

    I am getting the following error when running a report for my application in BPC NW.
    EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
    This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
    Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
    Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could  not make much out of it.
    Appreciate any assistance.

    Sanjay,
      This  is a   very  generic  error...Couple  of  places  to  look  for....
    1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
    2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
    3)Create a "evdataserver_debug.txt" in user's private publication folder on  server side to populate very detail level logging  and  check  the  log on client side EVDRE_LOG.txt for  further  peek  into  where  things  are getting  messed up.
    if  evdataserver_debug.txt does not  get  populated on BPC 5.x...it  is  an  issue  with  IIS authetication on Application server.
    4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
    BPC\Logging  for  further  details  ..
    Hope  this  helps..
    Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

  • Getting the MDX query select error when running a webi report on BI query

    Getting the following error when running a webi report on BI query :
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] }  ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521]  failed to execute with the error Unknown error. (WIS 10901).
    I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
    Please help in this regard.
    Thanks,
    Jeethender

    The Fix Pack is also for Client Tools--it is a separate download.  Please see the text below for ADAPT01255422
    ADAPT01255422
    Description:
    Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
    The following database error happens: "The MDX query ... failed to execute with the error
    Unknown error (WIS 10901)."
    New Behavior:
    This problem is resolved.
    This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

  • Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

    I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
    2 - Domain Controllers running Server 2012
    1 - Exchange Server 2013 running on Server 2012
    I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
    [Status/Consequence]
    The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_search_s() finished, return code is 0x20
    [2014/04/05:09:12:38.873]
    Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
    [Status/Consequence]
    The operation has not run or is not currently running. It will be run next.
    [2014/04/05:09:12:38.873]
    Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [2014/04/05:09:12:38.873]
    LDAP API ldap_modify_s() finished, return code is 0x13
    [2014/04/05:09:12:38.905]
    Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
    [User Action]
    Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    [2014/04/05:09:12:38.936]
    Adprep encountered an LDAP error.
    Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
     0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
    DSID Info:
    DSID: 0x181112dd
    ldap error = 0x13
    NT BUILD: 9600
    NT BUILD: 16384
    [2014/04/05:09:12:38.967]
    Adprep was unable to update forest information.
    [Status/Consequence]
    Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
    [User Action]
    Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
    Any Help would be appreciated. Thanks!

    Hi,
    did you check which servers has FSMO roles?
    You can do that via command prompt: netdom query fsmo
    For forestprep you must do that on DC which have Schema Operations marter role.
    Command
    Domain controller
    Number of times to run the command
    adprep /forestprep
    Must be run on the schema operations master for the forest.
    Once for the entire forest
    adprep /domainprep
    Must be run on the infrastructure operations master for the domain.
    Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
    Note
    Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
    http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

  • ORA-06502 - Error when running "Ask The Expert 0.9"

    Hi ,
    I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
    Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    Error Unable to write activity log.
    I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
    I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
    The debug function of the application show the following commands before the error ocurrs:
    0.01:
    0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
    0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
    0.01: alter session set nls_language="AMERICAN"
    0.01: alter session set nls_territory="AMERICA"
    0.01: NLS: CSV charset=WE8MSWIN1252
    0.01: ...NLS: Set Decimal separator="."
    0.01: ...NLS: Set NLS Group separator=","
    0.02: ...NLS: Set date format="DD-MON-RR"
    0.02: ...Setting session time_zone to -03:00
    0.02: NLS: Language=en-us
    0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
    0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
    0.02: ...ok to reuse builder session for user:nobody
    0.03: ...Application session: 6648566035252817, user=nobody
    0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
    0.03: Session: Fetch session header information
    0.03: ...Metadata: Fetch page attributes for application 103, page 1
    0.03: Fetch session state from database
    0.03: Branch point: BEFORE_HEADER
    0.03: Fetch application meta data
    0.04: Computation point: BEFORE_HEADER
    0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
    0.04: ...Performing function body computation
    0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
    0.06: Processing point: BEFORE_HEADER
    0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
    Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
    0.06: Encountered unhandled exception in process type PLSQL
    0.06: Show ERROR page...
    0.06: Performing rollback...
    Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
    Thanks,
    Sergio Coutinho

    Hi,
    I don´t know if it help the analisis, but i collect some informations about my environment:
    1) HTML DB version
    3.0.1
    2) Database version
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    3) Database server operating system (as well, if 32-bit or 64-bit)
    Solaris 5.9 - 64 bits
    4) Database Parameters:
    PARAMETER VALUE
    NLS_CALENDAR GREGORIAN
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_COMP BINARY
    NLS_CURRENCY $
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_DUAL_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_LANGUAGE AMERICAN
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_NUMERIC_CHARACTERS .,
    NLS_RDBMS_VERSION 10.2.0.1.0
    NLS_SORT BINARY
    NLS_TERRITORY AMERICA
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
    Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
    generating error when running in my environment?
    Thanks for the help !
    Sergio

  • Getting the below error when running the Baseline.grf for the first time

    I am getting the below error when running the Baseline.grf for the first time.
    Appreciate your support in resolving it.
    Error below:
    INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
    INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
    INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
    INFO [main] - Loading default properties from: defaultProperties
    INFO [main] - Graph definition file: graph/Baseline.grf
    INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
    INFO [main] - Checking graph configuration...
    INFO [main] - Graph configuration is valid.
    INFO [main] - Graph initialization (Baseline)
    INFO [main] - [Clover] Initializing phase: 0
    INFO [main] - [Clover] phase: 0 initialized successfully.
    INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
    INFO [WatchDog] - Starting up all nodes in phase [0]
    INFO [WatchDog] - Successfully started all nodes in phase!
    INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
    INFO [RUN_GRAPH1_0] - Checking graph configuration...
    INFO [RUN_GRAPH1_0] - Graph configuration is valid.
    INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
    INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
    WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
    java.lang.NullPointerException
         at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
         at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
         at org.jetel.graph.Phase.free(Phase.java:487)
         at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
         at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
         at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
         at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
         at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
         at org.jetel.component.RunGraph.execute(RunGraph.java:302)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
    WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
    ERROR [WatchDog] - Node RUN_GRAPH1 error details:
    org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
         at org.jetel.component.RunGraph.execute(RunGraph.java:324)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
    INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
    INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
    ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
    INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
    INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
    INFO [WatchDog] - 0 ERROR 2 20132
    INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
    WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
    ./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
    INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
    INFO [main] - Freeing graph resources.
    ERROR [main] - Execution of graph failed !

    It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
    #echo $CLOVER_LIB/*
    for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
         LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
    done;
    #for i in `ls $CLOVER_LIB/*.jar`; do
    #echo $i
    #done;
    You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
    HTH,
    Dan
    http://branchbird.com

  • SQL serever 2012 Setup has encountered an error when running a windows installer file

    I am trying to install SQL server 2012 Express on a windows 7 PC for 2 days now. I feel like banging my head against the wall.
    I keep getting the following errors here's the full log
    The following error has occurred:
    SQL Server Setup has encountered an error when running a Windows Installer file.
    Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer
    to Help and Support for more information. HRESULT: 0x8007054F. Windows Installer file: C:\Users\Receno\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
    Bootstrap\Log\20150109_213740\SqlSupport_Cpu64_1_ComponentUpdate_1.log
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325

    hmmm..so which hotfix do I apply ?
    SQL Server 2012
    All (Global) x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    SQL Server 2012
    All (Global) x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global) x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_DAC_CU11_2908007_11_0_2424_x64
    <input id="chk471373" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x64
    <input id="chk471368" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x64
    <input id="chk471370" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x64
    <input id="chk471371" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x64
    2012_RTM_RSShrPnt_CU11_2908007_11_0_2424_x64
    <input id="chk471374" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_DAC_CU11_2908007_11_0_2424_x86
    <input id="chk471372" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_SapBI_CU11_2908007_11_0_2424_x86
    <input id="chk471369" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    2012_RTM_PPExcel_CU11_2908007_11_0_2424_x86
    <input id="chk471367" style="margin:0px;padding:0px;" type="checkbox" />
    SQL Server 2012
    All (Global)
    x86
    SQLServer2012_RTM_CU11_2908007_11_0_2424_x86

Maybe you are looking for

  • Windows 7 on iMac using Bootcamp**HELP**

    I've been trying to install Windows 7 on my 2011 iMac (i3 core). The internal superdrive no longer works - it only accepts CDs - when ever I insert a DVD it gets ejected after a few moments. This iMac is out of warranty and no AppleCare was ever purc

  • Its urgent:plz tel me what is the steps move to produection oaf page.

    Hi All, I developed one oaf page.that page move to production. i already move to produection but its not working fine. its throw an error. plz tell me what is the steps follow when move to production. oracle.apps.fnd.framework.OAException: Applicatio

  • How can you develop photo galleries with multiple pages using the web module?

    Going through the web module I can see there are many options for developing a web page with a single collection of photos.  How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

  • DELIVERY TO PROFORMA INVOICE

    Dear All, Please help me getting this issue resolved. I am creating a delivery and some pupose i need to create a proforma invoice against the same. But system is allowing me to create multiple proforma invoices against a delivery. Delivery type i am

  • T.code for extend material master to  plant

    Hi Is there any t.code  (other than mm01) to  extend the material master to plants? regards sesidhar