Error when sending data from Cube to ODS

HI,
I am extracting data from 2lis_02_itm & I stored the data in 0pur_o01(ODS) tha data is fine in ODS but when I am trying to send data from ODS to Cube 0pur_c07 it is giving the above error
InfoSource 80PUR_O01 is not defined in the source system
Errors in source system     
InfoSource 80PUR_O01 is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource 80PUR_O01 specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing
Thanks
Priya

Hi A Priya
First check if infosource 80PUR_O01 is present in datasource list of your BW system. Check this in RSA1-> Infosources-> here do Settings -> display generated objects and then do search on 80PUR_O01.
if it not present there go to ODS 0PUR_O01-> right click
-> generate export datasource.
If it is present there then replicate the datasource by right click on transfer rules and then go to SE38-> Enter program name as RS_TRANSTRU_ACTIVATE_ALL -> Enter Infosource name as 80PUR_O01 and BW System as source system-> Execute. This will activate the transfer rules.
Then try reloading from ODS to cube
Regards
Pradip

Similar Messages

  • Error when sending data request

    Hi All,
       i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from  ecc 6.0 . all of this schedule's showing  the status "error when sending data request" with the following details.
    status
    diagnosis
    the request idoc could not be sent to the source system using rfc
    system response
    there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
      in step by step analysis it is showing
       rfc to source system successful showing with ash status
       data selection successfully stated  and finished ? show with red status
    in that details tab
    request : showing with green status
    everything ok
    extraction :showing with red status
    missing messages
    transfer(idocs and trfc) : missing messeges
    processing(data packet) : no data
        it is showing technical status with red as processing overdue
                           processing step call to source system
       so it is showing error with 0 from 0 records.
    please any body could help me for solving this error.
    regards,
    naveen.

    Hi
    Seems you have connectivity issues between the Source system and Bi system.
    You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
    RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
    You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
    Much of BASIS Issue .
    Hope it helps and clear

  • Error while updating data from PSA to ODS

    Hi Sap Gurus,
    I am facing the error while updating data from PSA to ODS in BI 7.0
    The exact error message is:
    The argument 'TBD' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
    Please suggest how to proceed on this issue.
    Points will be awarded.

    Hi ,
    Try to simulate the process.That can give you exact error location.
    It seems like while updating few records may be no in the format of the field in which it is updated.
    Regards
    Rahul Bindroo

  • Error while sending data from XI to BI System

    Hello Friends,
    I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
    Given error i faced out in communication channel monitoring:-
    Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
    Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner '10.1.45.35:sapgw01' not reached
    TIME Fri Apr 16 08:15:18 2010
    RELEASE 700
    COMPONENT NI (network interface)
    VERSION 38
    RC -10
    MODULE nixxi.cpp
    LINE 2823
    DETAIL NiPConnect2
    SYSTEM CALL connect
    ERRNO 10061
    ERRNO TEXT WSAECONNREFUSED: Connection refused
    COUNTER 2
    Error displaying in message monitoring:-
    Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM  TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       partner '10.1.45.35:sapgw01' not reached TIME        Fri Apr 16 08:15:18 2010 RELEASE     70
    Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM  TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       partner '10.1.45.35:sapgw01' not reached TIME.
    Kindly suggest me & provide details of error.
    Regards,
    Narendra

    Hi Narendra,
    Message is clearly showing that your system is not reachable
    102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
    Please check to ping the BI server  IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
    It seems to be connectivity issue only.
    Make sure your both the systems are up and running.
    Revert back after checking above stuff.
    Regards,
    Gagan Deep Kaushal

  • Error when reading data from socket

    Hi,
    I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API  'mo_core_service->invoke_matching'.
    And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
    Can anybody help me in correcting this?

    Hi Narasa,
    The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
    Problem in ABAP API - NiRawReadError: error when reading data from socket
    Rgds
    Ankit

  • Record increased when sending data from ODS to cube

    Hello experts,
            when i am sending data from ODS - CUBE i am sending 20 records of full update but in my cube i
    am able to see 200 records, in those records i am getting the old records.Everytime i load the data i am getting the same problem its fetching all the old records.Please suggest me what to do inorder to reslove this problem.
    Thanks alot,
    Komal.

    Hi,
    TO delete the PSA Table record details follow these steps,
    Right click your ODS/CUBE and choose "Show dataflow diagram" on right side panel click "Techincal Settings" ON and you can get your PSA table name. Type this table name in SE11 and delete your records.
    OR
    IN RSA1 --> PSA choose your infosource and choose PSA and right click and choose delete PSA data.
    Hope it helps
    Regards,
    Arun.M.D

  • Loading data from Cube to ODS

    Hi All,
    I have a cube which contains projects data. I want to load the data from cube to a write optimized ODS. In the cube for a project i have multiple records. But while loading the data to ODS, I have to summarise the data in such a way that i should have one record for a project i.e if the cube has data as follows:
    Project Cost
    abc      100
    abc       200
    abc       300
    Then in the ODS the record should be
    Project    Cost
    abc        600
    How do i achieve this ?
    Thanks,
    Satya

    Hi Satya,
    Generate export datasource from Cube ( Right click on cube ->generate export datasource).
    Create update rules for the ODS and in the update rule of Cost , you will find two options
    1. overwrite
    2. addition.
    Choose addition and activate update rules. ..This will work exactly same way you wanted.
    One more thing to mention ,Put project info object in to key fields of ODS and rest all info objects in to data fields.
    Hope that helps.
    Regards
    Mr Kapadia
    Assigning points is the way to say thanks in SDN.
    Message was edited by:
            Mr Kapadia

  • Error while loading data from 0FI_TX_4 to ODS

    Dear Friends,
    One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
    Short dump is raised in R3 system.
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "SAPLBWFIR" or "LBWFIRU13"
    "BWFIR_READ_BSET_CPUDT_DATA"
    ORA-01555
    The number of records are below 10000 only.
    All other chains are OK.
    we have already searched SDN and Notes...and applied below solution, but still no use
    Increase the size of all the roll back segments
    Increase number of REDO logs
    Decrease the number of records per data packet
    Any more suggessions please ??
    Thanks
    Tony

    How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
    Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
    I know you have read so many threads on the  same but what I am suggesting is what I have done and successfully rectified this issue.
    regards,
    rocks

  • Error when reading data from XML using JAXB?

    Hi all,
    I get the error message when reading data from XML using JAXB.
    [org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
    (AbstractUnmarshallerImpl.java:315)
         at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
         at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
         at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
         at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
    I don't find the reason, please help!
    Thanks in advance!

    The problem is sovled.

  • Error when uplaoding data from R/3

    hi Gurus,
            I have got a problem when loading data from r/3 to bw .
    i have loaded a init req and i have got more than 1 lac records.
    i found out that there are 2000 records with the same error in PSA.
    i have used a normal staging scenario ..psa and then to data target.
    I know we can do it manually..but anyother way not retrieveing from r/3 again.
    how to solve this problem.
    and plz let me if i can have only correct records into data target preventing the incorrect ones by any specific setting..
    will award points for good answers
    thanks ,
    charan.

    Hi krishna,
    there was a typo mistake with rohini..Use the transaction RSKC and enter those unpermitted characters..and do the load this time you will not get that error...
    Try to assign points upto your satisfaction level..

  • Runtime error when sending email from PCUI

    Hi,
    When sending email from an activity in PCUI, I get runtime error, Line 2201, error, 'Object Expected'.
    Any idea?
    Thanks,
    AR

    Hi AR,
    This appears to be a javascript error. Could you give some more details about this error.
    Regards,
    Hemanth

  • Error while loading data from write optimized ODS to cube

    Hi All,
    I am loading data from a write optimized ODS to cube
    I have done Generate Export Datasource
    schedulled the info packge with 1 selection for full load
    then it gave me following error in Transfer IDOCs & TRFC
    Info IDOC 1: IDOC with errors added
    Info IDOC 2: IDOC with errors added
    Info IDOC 3: IDOC with errors added
    Info IDOC 4: IDOC with errors added
    Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
    Processing below is green
    shows update of  4 new records to Datapackage 1.
    Please provide inputs for the resolution
    Thanks & Regards,
    Rashmi.

    please let me know, What more details you need?
    If I click F1 for error details i get following message
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
    Thanks & Regards,
    Rashmi.

  • Error when loading data from DSO to Cube

    Hi,
    After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
    Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
    Has anyone experienced a similar problem or have some guidelines on how to resolve it?
    Kind regards,
    Fredrik

    Hej Martin,
    Tack!
    Problem solved
    //Fredrik

  • Error 61 when sending data from client and back from server.vi

    Trying to generate and send a data from client.vi and adding the numbers generated and sending it back to the client .In client the data is received only once and an error 61 occurs .How do I get rid of this error?I have attached the two files for reference
    Attachments:
    Sguruserver.vi ‏63 KB
    client1.vi ‏100 KB

    You can certainly use and application started by WebStart to send data to a server.
    However, the Sandbox restrictions allow you to contact the server the application was loaded from without asking for permission first (i.e. signing your application and requesting the proper permissions in your JNLP file).
    The JNLP BasicService can be used to retrieve the URL (and therefore the server) the application was loaded from.

  • Sending data from SAP-BW ODS to R/3 database table/ view

    I need to store data in an ODS in BW from an oracle view & then send this data to SAP R/3 so that the same data can be used by SAP-ABAP for making a BDC program ( i.e. finally storing it in some database tables in R/3).
    Is it possible to do that?? if yes then how.....??

    Hi,
    Yes it is possibel.
    Use SAP PI ie XI which will send the data from BW to ur R/3 system.
    Check the links about XI.
    XI is a Integration broker. U can integrate any systems using XI.
    REDDY

Maybe you are looking for