Error when trying to activate transfer structure

Dear experts
I got this error when activating the Transfer Structure in the Data Souce:
   Table is not yet classified
   Field /BIC/ZPRCH026 is too long (Specify a length between 1 and 255)
   Flag: 'incorrect extension category' cannot be updated
   Table /BIC/B0002707000 was not activated
FYI, the lenght of the info Object /BIC/ZPRCH026 is 1000, as per other similar DataSource.
What should I do to remove this error?
Your help is greatly appreciated

Hi
I thought i have managed to reactivate the transfer structure. This was how i did it:
1. I went to SE11 and opened table structure /BIC/B0002707000 as per the error
2. I changed the character limit of ZPRCH026 to 255
3. I reactivated the table.
Then, I went to rsa1 to see the DataSource (which contains the Transfer Structure) and see that it is now activated.
I proceeded to create an Info Package under the DataSource, because I need to initialiase a delta queue.
Here are my config (in the info package):
1. In Update tab, I selected "Initialixe Delta Process" and check "Initialize without data transfer"
2. I select "Always update data, even if no master data exists for a characteristic"
3. In Schedule tab, I started the load immediately ("Start Data Load Immediately")
But then I got a message "No Transfer Structure Available D09_010 6AZPR034 (SY-SUBRC=5)"
FYI, D09_010 is the source system, 6AZPR034 should be the data source.
Could anyone advise me what went wrong?
Your kind help is highly appreciated
Many thanks
Wan

Similar Messages

HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results.

Error when trying to activate new valuation area - AU158

Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
Tks

Year end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose.

Error when trying to activate new valuation area.

Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advance

Hi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM

Error when trying to activate Office 2013 ProPlus - (0x80070005)

Have been receiving this error message for 2 days when trying to activate Office 2013.
Please note that I do not have the option to run Office as Administrator.
ISV using VB.net and SQL Server Express

Hi,
The suggestion I would like to provide was to run Office as administrator. By "I do not have the option to run Office as Administrator", did you mean you couldn't see the option or something else?
To run an Office application as administrator, we need to find the application shortcut, right click on it, then click "Run as administrator".
For the error message you provided, I also suggest you run the System File Checker to run the sfc /scannow command to scan all protected system files and replace the incorrect versions with the correct Microsoft versions.
For a Windows 7 PC
1. Click Start > All Programs >
Accessories, and then right-click Command Prompt and choose
Run as administrator.
2. In the command prompt, type sfc /scannow and press Enter.
3. When the system scan is complete, try to install Office again.
For a Windows 8 PC
1. Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click
Search.)
2. Enter command prompt in the search box.
3. In the list of results, swipe down on or right-click Command Prompt, and then tap or click
Run as administrator.
4. In the Administrator: Command Prompt window, type sfc /scannow
press Enter.
5. When the system scan is complete, try to install Office again.
I hope the information is helpful.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Errors when trying to activate web service

Has anybody encountered an HTTP 500 error while trying to activate a webservice based on a business object from one of the SAP namespaces?
The error that I am getting is: HTTP 500 (InternalServerError) - Dump or unhandled exception in backend.

Yes we have the same Problem. Are you using Association in your BO?
The Problem is known
This was defect in the code while trying to include
Cross Bo associations in Read Operation.
This was fixed in FP26 with Hotfix HZEK001337.
This is not yet imported into VQ3.
Solution: Wait till VQ3 is supplied with this week's hotfixes
or try to generate service without Cross BO associations till hotfix
is imported into VQ3.

Error when trying to activate the NI Fbus Ver 4

I have tryed the online activation, fill out all the info then when i hit continue i get an error, i then tried the phone activation line gave all my info and it said technical error, i then stayed on the line and talked to someone who also tryed it online and same result, i was told to try the forums for help. I am trying to activate NI-FBUS Ver 4

Hi,
The activation request you encountered is for NI-FBUS Configurator. NI-FBUS Configurator is a graphical tool for complete FF network configuration. Its license needs extra purchasing.
Another NI-FBUS software you installed is Communications Manager. Communications Manager provides the drivers for NI-FBUS interface devices and APIs for accessing FF network. You can build your own FF applications using the APIs. Communications Manager is free of charge and does not need activation.
If you are using Communications Manager only, there is no need to do any activation.
Could you send your serial number to [email protected]? I will check the activation status for you. Thanks.
Feilian (Vince) Shen

Getting an error when trying to activate MP !

hi guys,
I am getting following error , when i am trying to activate multi provider.
The MultiProvider definition contains an InfoObject that has not been assigned to the relevant InfoProviders.
please help
thaks

Hi Hon,
When you double click on the MP, you will be able to see all your Cubes. Also in the Right side you will be able to see the folders of MP like dimension, Unit, Time etc..
First you will need to drag & drop all the characteristics from your Cubes to Dimensions folder(You can rename it) & also Keyfigues to Keyfigure folder of MP.
Then at the top of right side left coner, you will find a icon "Identify characteristics". When you click on that, it will show you all the IO's you have dragged under DImension folder of MP along with the Checkbox & respective cubes in which that IO is present.
You will need to select the Check box(check them) & continue this for all the IO's.
Similarly there is one more button for kwyfigures beside "Identify characteristics". Select that & repeat the above step for keyfigures now.
After doing this, try to activate the MP. It should work
Hope this helps!
Regards,
Pavan

Error when trying to activate SharePoint Server Publishing Infrastructure

I have recently inherited a SharePoint environment. On one site collection (which has 786 sites and subsites), I am trying to activate the
SharePoint Server Publishing Infrastructure feature and am getting the below error:-
The field with Id {51d39414-03dc-4bd0-b777-d3e20cb350f7} defined in feature {aebc918d-b20f-4a11-a1db-9ed84d79c87e} was found in the current site collection or in a subsite.
I believe there are two site templates which when they are deactivated, the publishing feature will activate but then the site templates will not activate.
I have seen from other posts etc. that this is related to
Feature with Id {aebc918d-b20f-4a11-a1db-9ed84d79c87e} is "PublishingResources", a hidden feature
Field with Id {51d39414-03dc-4bd0-b777-d3e20cb350f7} is "PublishingStartDate". It's the first field defined in the feature PublishingResources
I found this thread which suggests using the -force to activate the feature - https://social.msdn.microsoft.com/Forums/en-US/af5d0943-a568-4426-89f3-b0691f8d3f87/error-activating-publishing-feature?forum=sharepointgeneralprevious which
I havent tried as yet as I need to copy it to a test environment so I don't break it and the DB is edging toward 200GB (another seperate issue).
I guess my questions are:-
I am migrating all of this content to SP 2013 in the near future - I am assuming it is best to fix this beforehand?
Would it be easiest to edit the site templates somehow - what would to do to the template to fix it?
Some direction would be great.

Hi Kelsnz,
I recommend to use the command below to check which sites have this field:
$site = Get-SPSite http://yoursitecollectionURL
write-host $site
$webs = Get-SPWeb -Site $site -Limit All
foreach ($web in $webs)
foreach ($field in $web.availablefields)
if ($field.id -eq [GUID]"51d39414-03dc-4bd0-b777-d3e20cb350f7")
write-host $web " = " $field " " $field.id
If there are any sites listed, you may need to re-create the site before you migrate the environment to SharePoint 2013.
More references about this issue:
http://www.techques.com/question/19-27196/Activating-OOTB-Features-Fails
http://pedrosneglectedtechblog.blogspot.com/2010/03/adventures-in-sharepoint-2010-upgrades.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when trying to activate ODS

I am trying to activate an ODS and get an error. Is there a program that I can run to try and activate. I know there is an OSS not on this but cannot remember the number. Error message is Message Type X. Thanks

Thanks will look at the note. There is the following additional info in the dump:
If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM07Z
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria
"MESSAGE_TYPE_X" C
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM07Z
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"

Error when trying to activate Internal Use Rights (IUR)

I am a Microsoft Silver partner. I am trying to activate my Azure Internal Use Rights (IUR). I am getting an error during the activation process. The error message is:
"MS-AZR-0025P IS NOT AVAILABLE"
I have taken screen shots of each step in the IUR activation process using Problem Steps Recorder. I can send them to you upon request.
I have opened support cases with Microsoft Partner Support and Microsoft Azure Billing Support. They suggested that I post my question here for a resolution.

Hi,
The Billing team should have assisted you with this issue since it requires access to your Account details.
However try the following steps if you havent tried these yet.
1) Open the Following link in an InPrivate Window (Internet Explorer press Ctrl+Shif+P) and check if you are still getting error.
https://account.windowsazure.com/signup?offer=MS-AZR-0025P
If that does not work, Try this.
http://azure.microsoft.com/en-us/offers/ms-azr-0027p/
2) Try using a different WLID (LiveID/Microsoft Account) to activate the offer if you already have a MPN offer on the same WLID.
3) The error may also be gerenated if the Silver Pack benefits is not being entitled to you. Call the Number 1-800-765-7768 to make sure that you are entitled to receive the silver pack benefits. you can alternatively to the website below to attempt to purchase
again.
https://mspartner.microsoft.com/en/us/pages/solutions/premium/windows-azure-cloud-partner-benefits.aspx
Let us know if this helps.
Regards,
Nithin Rathnakar

Class activation failed Error when trying to activate the enhancement

Hi ,
Wheni try to activate the enhancement for the component BP_HEAD_SEARCH view SEARCHHELP
i get the following error message Class activation failed Message no. BL001
the error occurs in implementation class , as wizard is adding some junk code.
Is there other way to work on it .
Edited by: sowmya K on Dec 9, 2008 2:00 PM
Edited by: Lakshmi on Dec 10, 2008 9:14 AM

The method WD_CREATE_CONTEXT in your Z-class has two ENDMETHOD. lines, one before and one after the wizard-implementation "ztyped_context ?= context." Just delete the first ENDMETHOD. line and activate the class, should work fine.
Alternatively implement the note 1167357
Edited by: Philip Kopetzky on Jan 14, 2009 12:34 PM

Error when trying to activate changes

Hi,
I'm using WebLogic 9.2.2 on Solaris 9. When I try and set my server start arguments to
-server -Xms1024m -Xmx1024m -XX:NewSize=64m -XX:MaxNewSize=64m -XX:PermSize=256m -XX:MaxPermSize=512m -XX:SurvivorRatio=4 -verbose:gc -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+PrintHeapAtGC -XX:+HeapDumpOnOutOfMemoryError -D_Offline_FileDataArchive=true -Dweblogic.connector.ConnectionPoolProfilingEnabled=false -Dcom.bea.wlw.netui.disableInstrumentation=true -Dweblogic.wsee.useRequestHost=true
But I get this error upon clicking "Activate changes" in the WebLogic admin console:
An error occurred during activation of changes, please see the log for details.
[Deployer:149150]An IOException occured while reading input. : with response code '500' : with response message 'Internal Server Error'
But when I look in the server log in question, there are no stack traces or error messages. Here's the screen shot from the admin console -- http://screencast.com/t/w0QxRWtRa. Any help on how to troubleshoot this problem is greatly appreciated, - Dave

Dave - Did you ever get a solution for this problem? We are facing the same problem with 10.3.4. When I try to activate a datasource or app changes via the weblogic console, I get the following exceptions:
Admin Server Error
####<Dec 9, 2011 3:26:20 PM EST> <Warning> <Deployer> <nykpsr8224> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1323462380586> <BEA-149078> <Stack trace for message 149004
java.rmi.RemoteException: [Deployer:149150]An IOException occurred while reading input. : with response code '500' : with response message 'Internal Server Error'
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:303)
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:125)
at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:301)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Managed Server Error
####<Dec 9, 2011 3:26:20 PM EST> <Warning> <DeploymentService> <nykpsr8224> <node2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c36a43
37f9da31a5:-1a05dae9:134247b7581:-8000-0000000000000048> <1323462380580> <BEA-290064> <Deployment service servlet encountered an Exception while handling the deployment service message for r
equest id "1,323,462,350,539" from server "AdminServer". Exception is: "java.net.SocketTimeoutException: Read timed out
at jrockit.net.SocketNativeIO.readBytesPinned(Native Method)
at jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:32)
at java.net.SocketInputStream.socketRead0(SocketInputStream.java)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at weblogic.socket.JSSEFilterImpl.readFromNetwork(JSSEFilterImpl.java:404)
at weblogic.socket.JSSEFilterImpl.read(JSSEFilterImpl.java:383)
Any help is greatly appreciated.

0xC004F074 error when trying to activate windows 8

I have a pre-installed Windows 8 on my laptop and it's activated. But after a few months, it becomes deactivated. Don't know what to do....when I try to activate it, I get an error message:
Error code: 0xC004F074
Error description: The Software Licensing Service reported that the product could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
Please help

Hi,
In addition to others, please also have a look at the following articles:
How to Fix Activation Error 0xC004F074 in Windows 8?
http://atechjourney.com/how-to-fix-activation-error-0xc004f074-in-windows-8.html/
Getting error 0xC004F074 when activating against KMS server
http://blogs.technet.com/b/craigf/archive/2011/03/03/getting-error-0xc004f074-when-activating-against-kms-server.aspx
If the issue persists, as Being mentioned, please ask for help from Windows 8 forums.
Regards.
Vivian Wang
TechNet Community Support

E-Reader throws an error when trying to activate the ebook (DRM)

On my e-Reader (Poketbook touch lux) is adobe digital editions allready installed, so I should be able to activate my books on the reader. When I open the acsm file it tells me that I have to activate my book. So I enter my Adobe ID and Password. Then he works a few moments and shows me this error:
E_STREAM_ERROR CURL returned 6 (6)
Does anyone know what I can do to be able avtivate my books on the e-reader?
Regards

I can't see much about this error on the web:
one comment is at http://www.topreviewshop.com/nextbook_next2_tablet_e_reader_conclusion
Just a thought, ADE and some ereader devices/apps do not like passwords that include special characters.
If you have anything other than non-accented letters and numbers in your password,
log in at the Adobe website and change the password to a weaker one.
Then try again to activate.

Error when trying to activate transfer structure

Similar Messages

Maybe you are looking for