Error when trying to add printer on USB Print Server

I'm attempting to connect to a Canon MP530 printer via a Netcomm NP3680 USB Print Server.
When attempting to add the printer via the Print & Scan process, the USB port is seen by the MacBook and listed - ie: mini_me-3-usb2, and the driver is selected automatically without any problem after gathering printer information, however the macbook is unable to connect and returns the error: "An error occurred while trying to add the selected printer."
If a manual configuration is attempted the message returned is: "An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time." Further manual config via the IP address will allow the printer to be entered, however the printer is non-responsive.
I have setup this printer via the same Print Server on the same Macbook prior to this and it setup and worked correctly - the same setup is working correctly on my wife's macbook. However I had to remove the setup on my Macbook and can't get the printer functioning again on this particular Macbook, or my son's.
The direct connection setup via USB directly works without any problem at all.
I'm currently running OSX 10.8.1, however my son is running 10.7.x and has the same problem. My wife's macbook is also running 10.7.x and is working fine.
Can anyone throw any light on this issue - it is truely frustrating, especially when I know it has worked in the past.
thanks very much in advance
GDT

After 55 views and 0 replies, and a number of calls to Applecare (without success) , I decided to once again troubleshoot the problem.
Fixed!
Bearing in mind, I had no other printers already set up in the Print and Scan window....
I removed the following items from the /library/preferences directory: 
"com.apple.print.makequeues.plist",
"jp.co.canon.ij.print.filter.raster2canonij.plist",
"jp.co.canon.ij.print.utility.command2canonij.plist",
"org.cups.printers.plist"
I also removed all items from the /library/printers directory (including Canon, PPDs, plist files and icons)
Then I retried to install the printer..... (holidng my breath) and the Console showed:
Repairing access permissions of "/Library/Printers/InstalledPrinters.plist"
All is fine now

Similar Messages

  • Ora 12154 error when trying to add a database to VS Server Explorer

    Hi Everyone,
    I get the Ora 12154 error when trying to add a database to VS Server Explorer.
    How do I get around this problem.
    The database service is running and I can connect to the database with pl/sql.
    I can also tnsping the database and that is also ok.
    Looks like a problem with the odp.net software.
    I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
    I am new to this stuff so please help me step by step.
    Thanks.
    Emad

    Hi J. B.
    I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
    Anyway here is the VB coding I used. I'm new to this and still learning:
    Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
    Public Class Form1
    ' String to connect to the database.
    Dim strConnectionString As String = _
    "Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
    ' Associate the connection string with a connection object.
    Dim objOracleConnection As New OracleConnection(strConnectionString)
    ' SQL query for returning data rows.
    Dim strSqlQuery As String = _
    "Select dname, deptno " & _
    "From dept " & _
    "Where deptno = 10" '
    ' Command object to make this query work.
    Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    ' Identify what type of command is being used.
    objOracleCommand.CommandType = CommandType.Text
    Try
    objOracleConnection.Open()
    ' Set up a Data Reader and load it with data.
    Dim objOracleDataReader As OracleDataReader = _
    objOracleCommand.ExecuteReader()
    objOracleDataReader.Read()
    ' Convert the department number to a string.
    lblDepartmentNumberFromOracle.Text = _
    CStr(objOracleDataReader.Item("deptno"))
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    End Try
    End Sub
    End Class
    I still want to thank you for the help you are providing.
    Truly,
    Emad

  • Error when trying to add and edit users in Server 4.0

    I am having a strange problem with my OS X Server 4.0 Users section. I try to add a local network user but it automatically adds as a local user. Also, when I try to edit the User account (add to a group), I get the error, "The operation could not be completed. com.apple.Server.Accounts Error 2." Can anyone help and tell me what this means? As well, I can not edit any of my local network users, as I get greyed out buttons everywhere. I am definitely logged in as an administrator and I'm pretty sure my DNS records are accurate.
    Edit- Fixed! Turns out I had 2 users using the same Full Name, one as a local user (admin) and one that is a local network user. I ended up using the local network user one!
    Message was edited by: xoxorockoutloud123

    Sorry I don't have an answer, but I have the same problem.
    I thought it might be because I'm connected to an Active Directory, but the problem seems more fundamental.

  • I am getting an error when trying to add a caption.

    I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc.  The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.  
    If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.  

    I was able to get it to work.  The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

  • Fatal error when trying to add derived table

    Hello,
    I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
    1 processor x Family 15 Model 0 Stepping 0
    Windows 2000 Workstation  v5.1 build 2600 (S)
    Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
    Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
    'Unknown' video card
       1280 x 768 in true color
    (doesn't make sense to me)
    I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
    I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS.  I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
    My utlimate goal is :
    For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
    I dont' understand, my join should be simple enough.
    Anybody knows what could be causing all these restrictions ?
    Thanks for you help.
    Edited by: Sose Canadian on Feb 9, 2009 9:40 PM

    Hi Sose,
    In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
    Try Following Solutions:
    Solution : 1
    When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
    Use the following steps to modify odbc.prm:
    1. Locate odbc.prm in the following folder:
    \Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
    2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
    If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
    Solution : 2
    This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
    The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
    Ensure that you are using the database specific middleware to create the connection.
    I Hope this Helpsu2026.
    Thanksu2026.
    Pratik

  • Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • FRM-40735 Error when trying to add an employee as key member for a project

    FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
    Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

    Error ORA-06502 says PL/SQL: numeric or value error.
    The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
    You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
    AB

  • Error When Trying To Add Web Clipping

    Receiving the following error in the Apache error log when trying to add a webClipping portlet:
    [Sun Feb  1 08:17:25 2004] [info] [client 141.146.192.68] MOD_OC4J_0007: Oc4j process unique id:
    C_130.35.162.13.11a3ac.f52e368ff8.-8000#titsto_iasmt.auohsitst03.oracleoutsourcing.com#391727#OC4J_Portal#OC4J_Portal#default_island parsed from cookie of session request: /portalTools/webClipping/htdocs/wcstudio/jsp/toolbar.jsp does not match to oc4j instance with destination name: OC4J_Portal. Ignore this cookie.
    The error "WCS-102" shows up on the web - page while trying to add a webClipping portet.
    We have installed JPDK 9.0.2.6.2 over 9.0.2.6.1 and redeployed jpdk and portalTools. Note that the middle tier is a two node RAC.

    Sorry to resurrect this old topic - but was a solution found for this? I'm having the same problem.

  • Getting error when trying to add authorzation in ERM (AC 5.3_SP,)

    Hi Experts,
    I have created a role in ERM and successfully saved it, when trying to add authorization by selecting the functional area->selected the functional are(procurement dept.) -> next i clicked on the authorization data-> aded one row ->when searching for the function id from the description field, it's searching for some time and after that, getting the follwing error .
    "Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://xiserver.ep.in:50000/VirsaCCFunction5_0Service/Config1?wsdl&style=document"
    Please do help.
    Best Reagrds,
    Gurugobinda
    Edited by: gurugobinda harichandan parida on Sep 10, 2009 6:29 PM

    Hi Alpesh and Zaher,
    Thanks a lot for all your help and support.
    After applying the note 1279722 my error got resolved, but after that when I am going to the next step to maintain PFCG it is giving me the error as: "Unhandled error; Function template PRGN_CHECK_ROLE_EXISTScould not be retrieved from CPD".
    Please do suggest.
    Regards,
    Gurugobinda

  • Error when trying to add a project to Subversion source control

    When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
    "There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
    This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
    Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
    Does anyone have a clue what the problem (and a solution) might be?
    Thanks,
    Theo.

    Hi,
    Davin mentioned:
    This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
    The OPM help on collaborating mentions:
    Open a rulebase project from source control
    To open an existing Oracle Policy Modeling project from a source control repository:
    In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
    Is this caused by an installation error or part of the "issue with the source control integration" ?
    Please let me know if I'm the only one experiencing this problem ....
    Thankx,
    Paul

  • Error when trying to add transitions and titles

    I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
    thanks!

    Hi minD:
    This error usually indicates an OS problem, rather than iMovie problem.
    Prevent Mac Disasters
    Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
    http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
    (Article is in 3 parts, don't miss parts 2 and 3)
    Sue
    (Thanks to Lennart Thelander for the copy & paste)

  • Error:-9672 when trying to add HP Photosmart C3180 printer.

    Printer: HP Photosmart C3180
    "An error occured while trying to add the selected printer. Error:-9672"
    Printer works fine if connected directly to my iMac. But, through "Airport Extreme Base Station", I get the error.
    Anyone with same printer having same problem? Anyone solutions?
    iMac Intel Core Duo   Mac OS X (10.4.6)  

    I found the same thing out yesterday and did the same solution.
    One issue should be noted. The quality of the print is much worse since we are not using the correct print driver. Works fine for standard unimportant text printing, but really can't be used for printing photos.
    Connect the printer directly to the computer USB and print a photograph using the real print driver, then connect wirelessly using the above method and print the same photo. The difference is dramatic.
    It also seems to overuse black ink when hooked up through the Airport, and the printer light blinks for a while after printing is done.
    Anyway, I plan on leaving it hooked up wirelessly for convenience sake, but when good quality is needed I will attach it directly to the USB port.
    You can verify my findings and let others know if you find the same thing I found.
    Good luck, and lets hope there are more compatible printers available in the future.

  • Successful-ok-conflicting-attributes error when trying to add printer

    I had my G5 and printer (Samsung ML1210) disconnected for a few days and reconnected it today. I found that I can no longer print to the existing queues (The Samsung directly connected and a shared C60 on a iMac). It just said "error while printing")
    I deleted both queues and then tried to add the Samsung Printer. I get an error which says "An error occurred while trying to add the seelcted printer. successful-ok-conflicting-sttributes".
    The console appends these two lines when I click "Add":
    Jul 9 09:43:59 Gregs-G5 csregprinter: err=-4205 [line 314, file RegisterPrinterProfiles/csregprinter.c]
    Jul 9 09:43:59 Gregs-G5 csregprinter: CSRegisterPrinter(devID, deviceName, dfltProfID, deviceProfs)=-4205 [line 192, file RegisterPrinterProfiles/csregprinter.c]
    I am able to add the C60 shared printer, but when I try to print I get the "error while printing"
    However, I can print to pdf.
    Anyone have any ideas or what to try next?

    Where is the printer set up file menu? I am having
    the same problem.
    Never mind... I found what I needed!

  • Xennet error, when tried to add new network card

    Hi,
    I got an error when I tried to create new virtual network thru VM manager,
    I have add a new virtual network card thru VM manager in the same Xen bridge "xenbr0" , then i reboot the virtual machine, but when i tried to activate this network I got the below error:
    cannot activate network device
    xennet device eth1 does not seem to be present, delaying initialization.
    ifconfig in the virtual machine:
    dev13248 Link encap:Ethernet HWaddr 00:16:3E:0B:DD:E4
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    eth0 Link encap:Ethernet HWaddr 00:16:3E:5A:3E:6E
    inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
    inet6 addr: fe80::216:3eff:fe5a:3e6e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:204 errors:0 dropped:0 overruns:0 frame:0
    TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:47253 (46.1 KiB) TX bytes:5623 (5.4 KiB)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:1045 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1045 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1458998 (1.3 MiB) TX bytes:1458998 (1.3 MiB)
    sit0 Link encap:IPv6-in-IPv4
    NOARP MTU:1480 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    ifconfig in the VM server:
    eth0 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3D
    inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:110 errors:0 dropped:0 overruns:0 frame:0
    TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:13177 (12.8 KiB) TX bytes:17612 (17.1 KiB)
    eth1 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3E
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:2052 (2.0 KiB)
    eth2 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:0E
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    eth3 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:10
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:127 errors:0 dropped:0 overruns:0 frame:0
    TX packets:127 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:11984 (11.7 KiB) TX bytes:11984 (11.7 KiB)
    peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:127 errors:0 dropped:0 overruns:0 frame:0
    TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:14405 (14.0 KiB) TX bytes:17422 (17.0 KiB)
    Interrupt:21
    peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:23
    peth2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    Interrupt:16 Memory:f8000000-f8011100
    peth3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:23 Memory:fa000000-fa011100
    vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:98 errors:0 dropped:0 overruns:0 frame:0
    TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:17612 (17.1 KiB) TX bytes:13177 (12.8 KiB)
    vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:6 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2052 (2.0 KiB) TX bytes:0 (0.0 b)
    vif0.2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    vif0.3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:12 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2236 (2.1 KiB) TX bytes:0 (0.0 b)
    xenbr1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:6 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1968 (1.9 KiB) TX bytes:0 (0.0 b)
    xenbr2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    xenbr3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    Don't inject the Windows 7 version of the driver into your WinPE image. Depending on what version of ADK you are using determines what version of the driver you will inject into WinPE.  If you are using MDT 2013 with ADK 8.1 you are using WinPE 5.0/5.1
    which is basically Windows 8.1. Make a selection profile explicitly for your WinPE drivers to inject. Only include the drivers you want in the WinPE image. And match the architecture of the network and storage drivers (Windows 8.1 versions).
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error When Trying to add more attribute to primary key

    I have a problem that I have an editable table that is mapped to view object
    this view object is mapped to singe Entity Object.
    My Entity Object has composite primary key the primary key composed from two attributes.
    but now I tried to change the primary key to make it composed from tree attributes that I tried to make one more attribute as primary key .
    when know I try to run the form this error appear
    <RegistrationConfigurator><handleError> Server Exception during PPR, #1
    java.lang.ArrayIndexOutOfBoundsException: 0
         at oracle.adf.model.binding.DCIteratorBinding.reserveRowWithKey(DCIteratorBinding.java:3857)
         at oracle.jbo.uicli.binding.JUIteratorBinding.reserveRowWithKey(JUIteratorBinding.java:483)
         at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.setupRegionIteratorBinding(JUCtrlHierNodeBinding.java:2128)
         at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.getRegionBinding(JUCtrlHierNodeBinding.java:2054)
         at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.getBindings(JUCtrlHierNodeBinding.java:1933)
         at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.internalGet(JUCtrlHierNodeBinding.java:1528)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierNodeBinding.internalGet(FacesCtrlHierNodeBinding.java:119)
         at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:750)
         at oracle.adfinternal.view.faces.model.HierNodeBindingELResolver.getValue(HierNodeBindingELResolver.java:52)
         at oracle.adfinternal.view.faces.model.AdfELResolver.getValue(AdfELResolver.java:86)
         at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
         at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
         at com.sun.el.parser.AstValue.getTarget(AstValue.java:82)
         at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:126)
         at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:230)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:481)
         at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:411)
         at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:116)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:334)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
         at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.renderDataCell(BaseColumnRenderer.java:1213)
         at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.encodeAll(BaseColumnRenderer.java:103)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
         at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
         at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.renderDataBlockRows(TableRenderer.java:1932)
         at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._renderSingleDataBlock(TableRenderer.java:1601)
         at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._handleDataFetch(TableRenderer.java:1003)
         at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.encodeAll(TableRenderer.java:504)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
         at org.apache.myfaces.trinidad.component.UIXCollection.encodeEnd(UIXCollection.java:529)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
         at oracle.adfinternal.view.faces.util.rich.InvokeOnComponentUtils$EncodeChildVisitCallback.visit(InvokeOnComponentUtils.java:113)
         at org.apache.myfaces.trinidadinternal.context.PartialVisitContext.invokeVisitCallback(PartialVisitContext.java:222)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:378)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
         at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
         at oracle.adfinternal.view.faces.util.rich.InvokeOnComponentUtils.renderChild(InvokeOnComponentUtils.java:43)
         at oracle.adfinternal.view.faces.streaming.StreamingDataManager._pprComponent(StreamingDataManager.java:611)
         at oracle.adfinternal.view.faces.streaming.StreamingDataManager.execute(StreamingDataManager.java:460)
         at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer._encodeStreamingResponse(DocumentRenderer.java:3200)
         at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1245)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
         at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.egabi.mcit.utils.SecurityFilter.doFilter(SecurityFilter.java:78)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)I didn't change any thing in the page only tried to add new attribute to be primary key
    when I mark this attribute in the entity as primary key .
    this error appear
    when I remove it the page run with no problem.
    The model run with no problem
    What is the problem about this.

    Do I get you right that you have changes the pk of the EO successfully and you see the error when running the app with the changed EO?
    Have you checked if the change of the PK was distributed to the VO too?
    Sometimes it helps to remove the component bound to the VO in question from the page and put it back on again.
    Timo

Maybe you are looking for

  • 32 GB microSDHC card N97 and 5800

    Working great on my unbranded N97 and 5800 handsets (and as I'm in the UK they both have ancient firmware). It also works in my N900 Maemo handset N97: 5800:

  • Check Information Update

    Dear All, I am facing problem in F-58 and FBZ5 for Check printing, while doing this in printout system is not updating the check information i have done the necessary configuration for this but still system is not updating the check information. Than

  • Aperture Screen Resolution

    I have used Apple Aperture in the past and got disgusted with it because the picture resolution is flat, fuzzy and lacking in color ... compared with other software like Canon Digital Photo Professional and Photoshop CS5. I recently download some pic

  • B500 - Web cam problem in windows 7

    I just reinstall a new Windows 7. My web cam in my Ideacentre B500 doesn't work correctly. There is no web cam icon in "MY COMPUTER". I tried to find its driver in LENOVO website but I can't.

  • Help me find my ipad 4, it was stolden in a home invasion on 12-13-12 please help.

    my ipad 4 was stolden 12-13-12 three men kicked in my door at three in the morning and took whatever they pleased they also held a gun to my daughters head she is 14. i have tried tracking the ipad but its obvious that im having no luck. please help