Error when trying to cut or copy: "CoInitialize has not been called"

I just installed Dreamweaver CS4 on my desktop PC (running Vista). I have the same version (from the same disc) on my laptop with no issues. For some reason, whenever I try to cut or copy (not paste) anything on the code or design view, I get the following error: "CoInitialize has not been called." Very few answers out there on the internet, and the ones I've found I don't understand.
Can anyone help? It is so frustrating to not be able to copy text!
Thanks,
Micah

I just installed Dreamweaver CS4 on my desktop PC (running Vista). I have the same version (from the same disc) on my laptop with no issues. For some reason, whenever I try to cut or copy (not paste) anything on the code or design view, I get the following error: "CoInitialize has not been called." Very few answers out there on the internet, and the ones I've found I don't understand.
Try Step #4 in this TechNote:
http://kb2.adobe.com/cps/405/kb405604.html#main_dat
HTH,
Randy

Similar Messages

Error when trying to cut /copy

Once I have Crystal Reports 10 open, while trying to do a cut copy I receive this error ; "CoInitialize has not been called". Also I can no longer open or save the report. I have to X out of Crystal and start all over. I have checked Event Viewer and there are no application errors reported. This only seems to happen in Crystal. Can anyone give me an idea of what might me causing these issues?
Tx Shirley

Very strange....
Has this always happened?
How Technical are you? If you know or use DebugDiag and/or Process Monitor they may show you what is going on.
I know what may be the cause GDIPlus.dll, It's MS Graphical Device Interface and there have been a few issues with it. Recently I heard there was a security problem detected also and MS just pushed out some updated.
Try changing your Video Resolution and DPI and if you can see if your PC's Video Card Drivers can be updated.
CR 10 was never supported on VM-ware so we can't use it as a test. After updating the above try uninstalling and reinstall VM-Ware Tools, it too has Video plug-in that may need to be refreshed/updated.
Thanks
Don

I get this error when trying to create a ringtone - iTunes could not connec

I get this error when trying to create a ringtone:
"iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
But I CAN connect - if I click on the iTunes Store, it connects right away.
I want to make a ringtone from a song that I purchased, but all I get is the same error message.
iTunes 9.2.2, Ireland iTunes Store.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

How do i fix itunes when it says "this version of itunes has not been correctly localized for this language please run the english version"

today i decided to download some music on my windows 7 laptop, but when i tried to launch itunes it had said "this version of itunes has not been correctly localized for this language. please run the english version." i need help please!!!!! it's very irritating!

Hello jalynn231
Check out the troubleshooting steps in the first article. If it is not resolved, then try and remove iTunes and its related software in the right order and then reinstall.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I'd a error message about a security network connection that has not been correctly cleaned up each time I open the browser

Every time I open the browser an error message pops up, it says:
"The operation can bot be completed because of an internal failure. A secure network communication has not been cleaned up correctly."
The main difference I saw is that my home page, a customize igoogle one that needs login, is redirected to the main igoogle page because login is not successful and I had to manually do it. Even if I state to remember me, it doesn't work once I close the browser.

This is a known bug that will be fixed in beta 7. You should only get that error message the first time after updating Firefox. If you are getting it all the time, are you switching between different versions of Firefox?
Do you still have an earlier version of Firefox installed, and if you do does it use the same profile as the beta version. If you do that can cause problems since Firefox 4 handles extensions in a different way than earlier versions of Firefox. If you do have 2 versions of Firefox installed, you need to use 2 different profiles.

How can I stop from getting the "Firefox is already running" error message when trying to open links and FF has already been opened through a symbolic link?

I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7

hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use

HT4095 Keep getting a error when trying to play rented movie we could not complete your itunes store request. an unknown error occurred (-42110)

I downloaded a HD movie for rental and every time i go to play it i get a error saying we could not complete your Itunes store request. a Unknown error occurred (-42110)

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Error when trying to add users - The server is not operational [domain]

Installed the admin console and went to start adding users to the system. On the add users screen I select the domain and then get the following error:
The server is not operational [domain]
I looked this up in Service Notes and found this and found SN 1098415.
The root cause indicated there is that the server is part of a WindowsNT domain and as such can't issue the LDAP query.
This server is running in an active directory domain (not sure if it is 2000 or 2003, but it is AD nonetheless.
Any thoughts? There are no firewalls in-between the servers that provide AD and this server.
McP

I solved my problem. For purposes of discussion let's call my Pre-Windows 2000 domain name ACME and my Windows 2000/2003 domain acme.net.
After writing several manual VBScript LDAP queries (to take BPC out of the equation) I determined that the DC didn't want to answer to ACME. It would only answer to acme.net.
So, I went into Server Manager to "Define System User Groups" and updated the system user group "Domain Users" to look at acme.net for the domain name instead of just ACME.
That did the trick - I am now able to see all the users in the domain.
Thanks for all the suggestions.
McP

When I download CS5.5 I receive an error message informing me one of the files has not been downloaded properly, but it has?

I have downloaded CS5.5 three times and whenever I choose the set.up.exe file I receive a message that there is an error in the download and a file was not downloaded properly, but everything has been downloaded and has come through.

what files (name and extension) have you downloaded and what are their file sizes?

The ConnectionString property has not been initialized random error

Hi,
Can someone please help me?
I randomly get an error when running my website:
The ConnectionString property has not been initialized.
First time I run the web page it works. Second time it fails. Is this got anything to do with static methods?
This is my code in DAL layer:
ConStrings.cs
public class ConStrings
/// </summary>
public static string PizzaDeliveryConnectionString
get
// get from PL web.config
string myconnectionString = ConfigurationManager.ConnectionStrings["PizzaDeliveryConnectionString"].ConnectionString;
return myconnectionString;
public static SqlConnection GetPizzaDeliveryConnection()
return new SqlConnection(PizzaDeliveryConnectionString);
DLCustomer.cs
public class DLCustomer
static SqlConnection connString = DL.ConStrings.GetPizzaDeliveryConnection();
public static DataSet GetCustomerByPhoneNumber(string phonenumber)//static is good for returing data from db
DataSet ds = null;
ds = new DataSet();
try
using (var connection = connString)//using doesn't require connection closed
connection.Open();
using (SqlCommand cmd = new SqlCommand("GetCustomerByPhoneNumber", connection))
cmd.Connection = connection;
cmd.CommandType = System.Data.CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@phonenumber", phonenumber);
using (SqlDataAdapter da = new SqlDataAdapter(cmd))
da.Fill(ds, "CustomersTable");
return ds;
catch (SqlException ex)
return ds;
BUSINESS LAYER
Customer.cs
public class Customer
private string phonenumber;
private DL.DLCustomer customerData;
public int CustomerId { get; set; }
public string CustomerName { get; set; }
public String PhoneNumber
get
return this.phonenumber;
set
this.phonenumber = value;
if (this.PhoneNumber == "")
throw new Exception("Please provide Tel ...");
public Customer () // Default Constructor
//An instance of the Data access layer!
customerData = new DL.DLCustomer();
/// Function Find customer. Calls the
/// function in Data layer.
/// It returns the details of the customer using
/// customer ID via a Dataset to GUI tier.
/// </SUMMARY>
public static DataSet GetCustomerByPhoneNumber(Customer customer)
if (customer.phonenumber == "")
throw new Exception("Please provide phonenumber to search");
DataSet data = null;
data = DL.DLCustomer.GetCustomerByPhoneNumber(customer.phonenumber);
return data;
Presentation layer
protected void btnOrder_Click(object sender, EventArgs e)
Customer customer = new Customer();
//string dt = Request.Form[txtDate.UniqueID];
customer.PhoneNumber = txtPhoneNumber.Text;
// ClassLibrary1.DbFunc1.GetCustomerByPhoneNumber(customer) ;
rptCustomers.DataSource = Customer.GetCustomerByPhoneNumber(customer);
rptCustomers.DataBind();
web.config
<configuration>
<connectionStrings>
<add name="PizzaDeliveryConnectionString" connectionString="Data Source=mycomp;Initial Catalog=PizzaDelivery;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>

Hi
collie12,
Since you develop in web page. Please try to use
System.Web.Configuration.WebConfigurationManager.ConnectionStrings["YouConnStringName"].ConnectionString;
This requires references to System.Configuration.dll and System.Web.dll.
WebConfigurationManager.ConnectionStrings Property gets the Web site's connection strings.
Please also try to remove your static keyWords, it will have an effect on "using" statement.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error message indicating that iTunes card has not been properly activated. Please help.

I tried to redeem an iTunes card but an error message pops up indicating that it has not been properly activated.
What should I do?
Please help.
Thanks in advance

What you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards.

Error during project server 2013 The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

Hi sir,
when I have try to fetch the value of project start date and finish date and some other field value , I have recived error message like The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been
executed. It may need to be explicitly requested.
I have used client context for project server 2013.
I have also load and execute query.but fail to resolve it Please suggest me and provide solution.
vijay

Hi,
If you use the Include<TSource> Method in the Load method, we will retrieve only the ids of items in this query, so
the listItems.ListItemCollectionPosition will not be initialized.
You can use the <ViewFields> tag in CAML Query to specify the field values to return with each item instead.
Best regards
Patrick Liang
TechNet Community Support

HT201195 I tried to redeem an iTunes gift card and it said that my card has not been properly activated

pls could somone help
I tried to redeem an iTunes gift card and it said that my card has not been properly activated
Yvesolution

What you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards.

Csom error The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

Hi sir,
When I have get the value of project owner the error is occured
The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.
vijay

Hi Vijay,
The owner details are not loaded by default when you load all projects.
You have to make sure the details of the project owner are loaded before you can access them:
foreach (PublishedProject pubProj in projContext.Projects){
User owner = pubProj.Owner;
projContext.Load(owner);
projContext.ExecuteQuery();
Console.WriteLine(owner.LoginName);

Error when trying to cut or copy: "CoInitialize has not been called"

Similar Messages

Maybe you are looking for