Error when trying to release the billing document to FI accounting

Hello,
when we are trying to release the document to accounting, we get the error :
"The tax amount must not be greater than the tax base"
Could you, please, let me know what should be checked, as customer is saying all data is correct
thanks in advance for your precisous help
regards
Hana

Hi Hana,
There is a note exist for this error.
Please look into it, it will help you to resolve the issue.
Note 606342 - Tax amount is larger than tax base
Hope this helps,
Regards,
MT

Similar Messages

Error while releasing the Billing document

Hi Everyone,
Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
Rgds,

hi,
We are facing similar problem, when releasing the billing document to accounting.
Have you been able to find the solution to this problem. If so, kindly suggest the answer
Thanks
Dinesh

Problem in releasing the billing document

When I am trying to release the billing document to accounting, I am getting the following error.
"Account XYZ requires an assignment to CO object".
What could be the cause of it?

Hi Christino,
Carefully think about it first as to which account groups belong to which chart of accounts (or which profit center groups to which controlling area).
Then call report ZECPCA11 for the respective top hierarchy node of a hierarchy of account groups (or profit center groups).
Enter the name of the hierarchy node under "Group", the name "RACCT" for account groups (or "RPRCTR" for profit center groups) under "Field" and the required chart of accounts (or controlling area) under "Searchf".
The "0H_Kennz" indocator should generally be marked (all groups that were created with the maintenance transactions in EC-PCA are technically stored as 0H sets in the database, that is, with prefixed "0H").
Report ZECPCA11 fills the T800S-SEARCHFLD field with the required chart of accounts (or controlling area) for all groups of the entered hierarchy.
After you have corrected all hierarchies this way, you should be able to maintain the account groups or profit center groups again.
You can find report ZECPCA11 on SAPSERV in directory /ftp/general/R3Server/ABAP/note.0042821 under the name "ZECPCA11.TXT". Alternatively, create the report from the 'Corrections' section using Transaction SE38.
For further more details, please refer the SAPnote 42821
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=42821
hope it will be useful. Appreciate with points if it useful.
Thanks and Regards
Vetrivelan

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error While Releasing the Billing Document Msg No. KE/AD 243

I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
Dhiraj

Dear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj

While releasing the billing document error

Dear TEAM,
While releasing the billing document system was showing the message like NO STANDARD COST ESTIMATE COULDBE FOUND FORTHE MATERIAL.
I have suggested to the user to release the price through ck24.At that time system is showing the message like cost has not been created for the inhouse production.
The samething was tested in Qualiy server and the transaction was through.I have not done any price release for the samematerial.I have checked the table under VBAP the documents was made against to the samematerial.That time we have not faced any issues like this.
Note:Material ledger concept using by client.
Please kindly advice how to proceed further.
Regards,
Suma

have you checked in ck13n if there is a standard cost estimate for the material and what status it has, if there is one? Also, what are the dates in that cost estimate? How do they compare to the date of the billing document? What does the customizing say about the selection of cost estimates for valuation of SD documents? SPRO>Controlling>profitability analysis>master data->valuation-->Set up valuation using material cost estimates
Nikolas

On Windows Platform, encounters error when trying to open an Indesign document created from MAC

Hi all,
On Windows Platform, encounters error when trying to open an Indesign document in INDD format created from Mac. Error received "Either the file does not exist, you do not have permission, or the file may be in use by other application". I am currently using Adobe Indesign CC 9.2 Trial version.
Kindly advise how can i open this document on windows platform and allows me to edit the document.
Thanks!
With Rgds,
Fiona Choy

Normally there is no problem to open any INDD opening on Windows, when created on the Mac.
But Mac user are often not aware on the naming limitations. A file name must not contain /, \, |, :
It should not contain any extended character, it is not a primary problem but will be, if something links to that file, so avoid also: ÄÖÜäöüß+&
You can use all other non A-Z a-z, 0-9 and - and _
I personally would also recommend to avoid spaces.
This is valid for the INDD file itself but also for all linked content.

Error when trying to access the RBAC User editor and Message tracking

Hi,
I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue.
https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
I then checked the event logs on the server and saw the below error logged;
Current user: 'Domain/Server Services Accounts/administrator'
Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
--- End of inner exception stack trace ---
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.default_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
have to close this window and log on again.
at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
Any ideas as to what the above event log is specifically referring to?

Hi,
From your description, I would like to clarify the following thing:
If you want to search message tracking logs, the account you use should be a member of the role groups below:
Organization Management role group, Records Management role group, Recipient Management role group.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

I keep getting an error when trying to receive the new update iOS7 on iPhone5. Any suggestions?

Do the update using iTunes on your computer.
Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

FM-release the billing document to FI postings

Hi SAP Gurus,
I would just like to ask, what Function Module can be use to release the billing document to FI postings? I hope someone can help because Im kinda new with this.
Thanks in advance.

The program i have provided is a report, if you can understand using the program you can just use SUBMIT statement and there is no need of FM's.
Alternatively if you want you may explore FM: SD_INVOICE_RELEASE_TO_ACCOUNT.
Regards
Eswar

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

I get an error when trying to open "The application Creative Cloud can't be opened. -1712

The application Install.app can't be opened. -1712

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Error when trying to start the ToolsAndFrameworks to access Endeca workbenc

Hi All,
I am getting the below error when trying to start the ToolsAndFrameworks.
Starting Workbench (background process)
The BASEDIR environment variable is not defined correctly
This environment variable is needed to run this program
Regards
SK

Hi SK,
This occurs in those cases where the Endeca environment variables are not set properly. Make sure all the Endeca environment variables are set before starting the Tools services.
Executing the 'mdex_setup_ini' and 'installar_sh.ini' will setup the Endeca environment variables. Below are the commands for the same.
source /local/endeca/MDEX/6.3.0/mdex_setup_sh.ini
source /local/endeca/PlatformServices/workspace/setup/installer_sh.ini
HTH,
Mahesh

Error when trying to release the billing document to FI accounting

Similar Messages

Maybe you are looking for