Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

Similar Messages

  • Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

    when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

    This would indicate that your MacBook Air does not meet the requirements for Mavericks.
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • IMac harddrive S.M.A.R.T. errors when trying to upgrade from snow leopard to mountain lion

    When I try to install OS X Mountain Lion on my 2010 iMac version 10.6.8 I get a message that says "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired." Is there a way to fix this? Is apple just trying to get me to buy a new computer?

    The S.M.A.R.T. diagnostics that are built into your hdd are designed to warn of impending hardware failure.
    Take a look at this Wikipedia article... http://en.wikipedia.org/wiki/S.M.A.R.T.
    You may be able to use Disk Utility to run the Repair Disk routine and get the drive to map out any bad sectors that might be causing some problem. And the drive may perform well again for a while. But once a disk begins to display performance degradation because of a hardware issue, it's only a matter of time before it fails.
    I think the best thing for you to do is to back up your data and replace that drive ASAP.
    Drives are relatively inexpensive mechanisms and they will all fail sometime. And never at a good time.

  • There is an error when trying to upgrade to Mavericks from OX Lion

    There is an error when trying to upgrade to Mavericks from OX Lion

    So whenever i click on "free upgrade" ..that message shows up next to it..

  • I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

    I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

    You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
    Direct Download Links for Adobe Software
    Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
    You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
    Kindly follow the very important instructions before download.
    It might help you.
    Regards
    Rajshree

  • Error when trying to upgrade scsm dw 2012 sp1 to r2

    Hello,
    when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
    does anyone faced and successfully resolved this problem?
    regards,
    Ilgar
    Regards, Ilgar Khalilov.

    This issue might happen if you have a space in the DW Management Group name.
    Maybe this blog post from Anders Asp is helpful:
    Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
    Andreas Baumgarten | H&D International Group

  • IMac shuts down when trying to upgrade from Tiger to Leopard

    My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
    Thanks

    rk87,
    Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
    I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
    His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
    Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

  • I receive a Runtime Error when trying to go from Organizer to Editor. It reads:  Microsoft Visual C   Runtime Error....Runtime Error....Program c:/ (x....

    When trying to go from Organizer to Editor, I receive a Ryntime Error.  It reads: Microsoft Visual C++ Runtime Error.    Runrime Error  Program c:\(x....

    I kept getting the same error message too! Thank goodness I'm not alone in this!

  • Consistent 8007 error when trying to download from iTunes / App Store on my iMac.

    Hi I get a consistent 8007 error when trying to download on my iMac. Yet can download and it works fine via Apple TV. I'm also having issues downloading on the App Store. I've checked the date and time, firewall and everything else seems to be fine. I can't uninstall iTunes as am running OSX 10.8.4 and am not tech confident enough to run this via terminal. Help!

    I tried switching off Apple tv and when reconnected after 30 sec. Or so, it continued downloading

  • Error when trying to upgrade Dreamweawer

    Getting this log message when trying to upgrade:
    Dreamweaver CS5.5 11.5.3 Updater
    Installationen misslyckades. Felkod: U44M1P7
    please advice

    NIcolas, Looks like one of th eupgrde steps failed. You will have to open a tac case here as most likely tac will need to get into expert mode adn make some changes to permit you to complete the install. Matthew

  • Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

    Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
    Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
    Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
    All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
    Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
    Ran hardware test and everything checked okay.
    Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

    Welcome to Apple Discussions!
    See my FAQ:
    http://www.macmaps.com/upgradefaq.html
    and then consider the instructions here to Archive and Install:
    http://docs.info.apple.com/article.html?artnum=301270

  • Error 1053 when trying to upgrade from BOE 3.0 Fix Pack 3 to BOE 3.1 Update

    Hi! I am trying to upgrade my BOE 3.0 FP3 Server to 3.1 (Update package, not full 3.1 install). The upgrade goes very well, and for a very long time, up until the very end. At the end when it tries to restart the Tomcat service it throws an error 1053 with the following message.
    The Apache Tomcat 5.5.20 service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    I also get this same message if I try to start the service through Control Panel -->  services or through CCM. The event viewer shows this message also in addition to the following..
    Timeout (30000 milliseconds) waiting for the Apache Tomcat 5.5.20 service to connect.
    Has anyone seen this before or know if this is a known error? I am hoping for a workaround so I dont have to backout or reinstall!
    Thanks!
    --Antonio

    Hi Antonio,
    Following information might help you to resolve the issue.
    Solution1:
    To resolve this behavior, use Computer Management to update the user profile so it is a member of the Administrators group, and then reboot the server to validate your changes.
    Solution2:
    You can disable DEP or add services to it:
    1.Right-click on My Computer and select Properties.
    2.Click the Advanced tab.
    3.In the Performances section click Settings.
    4.Click the Data Execution Prevention tab.
    5.Use the Add button on the bottom to add the service's executables and ensure the box is checked. Do this for each Crystal Enterprise service.
    Alternatively, you can disable DEP by checking the Turn on DEP for essential Windows programs and services only option. By doing so, it will disable DEP to all applications on the machine including Business Objects.
    Solution3:
    Increase the service time-out for Windows Services : http://support.microsoft.com/kb/839803http://support.microsoft.com/kb/886695
    Regards,
    Sarbhjeet Kaur

  • I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

    I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

    You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
    My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
    Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
    You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
    Most commonly used backup methods
    If your OS X parititon doesn't boot, you can use this to recover files.
    Create a data recovery/undelete external boot drive
    Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
    If you wish to switch your boot drive for something better, this is a good time to do this.
    Install/upgrade RAM or storage drive in Mac's
    If your machine is capable of Internet Recovery, then use that, then upgrade.
    If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
    Erase, formatting, OS X installs on Mac's

  • OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

    Hi all,
    I'm trying to upgrade my RAC installation.
    To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database).
    When i'm lauching OUI for the Clusterware 10.2.0.1 installation, on the node selection screen, the node is present and selected, but I can't go on, i'm getting an OUI-25023 Error.
    Here is the log from this installation:
    INFO: Node selection page will be shown because a cluster install is detected on the selected home.
    INFO: Setting variable 'CLUSTER_NODES' to 'CAMRDO01,'. Received the value from a code block.
    INFO: The cluster node list 'CAMRDO01' is derived from the Oracle home properties.
    INFO: Local node 'camrdo01' is derived from the clusterware stack.
    INFO: Setting variable 'LOCAL_NODE' to 'camrdo01'. Received the value from a code block.
    INFO: isRollingUpgradeEnabled():true
    INFO: Rolling upgrade is enabled for this product.
    INFO: Setting variable 'REMOTE_NODES' to 'CAMRDO01,'. Received the value from a code block.
    INFO: isRollingUpgradeEnabled():true
    INFO: Setting the 'ClusterInstallDescription' property to 'Select nodes (in addition to the local node) in the hardware cluster where the installer should install products that you select in this installation.'.
    INFO: Setting the 'SingleInstanceDescription' property to 'Select this option if you want to perform a single node non-cluster installation even though the local node is part of a hardware cluster.'.
    INFO: Setting the 'InvalidNodes' property to 'null'.
    INFO: Setting the 'AllowRemoteNodeSelection' property to 'true'.
    INFO: Setting the 'ShowCRSSoftwareVersion' property to 'false'.
    INFO: Setting the 'NewHome' property to 'false'.
    INFO: Setting the 'ClusterNodes ( CLUSTER_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
    INFO: Setting the 'LocalNode ( LOCAL_NODE )' property to 'camrdo01'. Received the value from the UI page.
    INFO: Setting the 'RemoteNodes ( REMOTE_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
    INFO: Performing tests to see whether nodes CAMRDO01 are available
    SEVERE: OUI-25023: The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
    INFO: User Selected: Yes/OK
    Does anyone have tryed and succeded in upgradnig 10.1.0.3 RAC to 10.2.0.1, and is there any workaround for this problem?
    thx for help,
    Siftin

    Can you check the install log to see if any errors are recorded there ?
    http://download.oracle.com/docs/cd/B14117_01/em.101/b12140/A_oui_troubleshooting.htm#sthref268
    HTH
    Srini

  • Error when trying to upgrade SQL Azure database using DAC Package in MGMT Studio - "Unexpected XML Content"

    Hi there,
    I am trying to upgrade a database running in SQL Azure from my local dev box which is running SQL Server 2008 R2 Sp1 (Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64))
    I extract the dac with no problems from my local database. However, when I try to upgrade the Azure db I get the below error.
    This error occurs just after I browse to select the dac package and click open in the browse window. I.e. It happens before I actually try and apply this dac to the Azure database. Something is going wrong, presumably, when the package is parsed by management
    studio.
    I am running Visual Studio 2010 Premium Sp1 if that matters, plus all the various updates required for Azure development..
    Thanks for your help!

    Hey there, and apologies for the lack of response.  Are you still having this issue and still needing help?
    Thanks Guy

Maybe you are looking for

  • Short dump in bapi

    hi gurus,        i have a z-bapi (Z_BAPI_SB_SALESORDER_CREATE), where i added some import parameters(z-fields), i need to populate these fields on the sales order screen 'additional data B'.. In the structure bape_vbak which in turn has a append stru

  • What is the best way of doing it? SAP Gui or HTML gui

    What is the best recemended option of SAP Win gui or HTML gui doing it for the Portal for R/3 transactions. I heard there is much network space will take if i use HTML gui for more than 1000 users, when u consider. Ur suggestions are Welcome. Pl expl

  • Using an ext HDd and air port

    So I've had no end of trouble with trying to get backups done on a network so one final time here I go! I have 1 Mac, that I would like to backup with TM via a network, I recently discovered my current router with an HDd won't work cause it's not AFP

  • Need to install weblogic portal and how to start

    HI, Can anyone guide me how to install the weblogic portal.. from where i can get the exe and user guide.. plz give me the links

  • How To Insert Cells Into One Column Only

    Can anyone advise me, how to insert a cell (or multiple cells) into +just one column+ whilst leaving everything else on the sheet exactly as it is? I'm migrating from Excel and can't find this functionality in Numbers Thanks in advance for any help