Error when turn on

may problem is my pc get an error of R-R-G-R in booting. what is wrong with this setting i only run it one day but when i turn off my pc that error will come heres my setting in oc..
where did i go wrong?
Quote
Motherboard OC Jumper set to default
================================
C1E: Disabled
Green Power: All Disabled
================================
Multi-Step OC Booster: Mode 1
DOT Control: Disabled
Intel Eist: Disabled
intel C-State Tech: Disabled
Adjust CPU FSB Frequenxy: 400
Adjust CPU Frequency:3200
CPU Multiplier: 8
================================
Advance DRAM Configuration: Manual
CAS Latency: 5
tRCD: 5
tRP: 5
tRAS: 15
Advanced memory Setting: Disabled
FSB/DRAM ratio: 1:1.33
Adjusted Dram Frequency: 1066
================================
ClockGenTuner: No Changes Done
Adjusted PCI Frequency: auto
Auto disable DRAM/PCI Frequency: disabled
================================
CPU Voltage: 1.3875v
CPU GTL REF0: 0.8694
CPU GTL REF1: 0.8694
Dram voltage: 2.2v
DDR_VREF_A: 1.104v
DDR_VREF_B: 1.104v
MCH Voltage: 1.48
MCH GTL REF: auto
VTT FSB Voltage: 1.38
ICH Voltage: 1.58
================================
Spread Spectrum: Disabled
specs:
Q6600 G0
msi p45 platinum
2*2gb team xtreem dark 1066mhz @ 5-5-5-15(2.1-2.2v)
9600gt
FSP everest 600w.

Quote
may i ask a question how many voltages i will add if im try to go to 3.4ghz to 3.6ghz..TIA
That is impossible to answer as it is something you will have to find out yourself through systematic testing,

Similar Messages

Error when turning on Match on Phone, even with the same ID

Like many of you, I keep getting the "You are not currently subscribed to iTunes Match" error when attempting to activate the service on my iPhone and iPad. Initially the ID's were different; it was the confusion for those of us who had both .mac adresses that were converted to .me addresses, etc. I set up EVERYTHING across all systems to work with a single user ID, "[email protected]". In the stores on all 3 devices, that's the ID. In the settings, that's the ID. The same, unique password works across all systems. Match was set up and activated perfectly on my Mac. But still the iDevices give me this frustrating error. Help?

Hi Srujan,
2 reasons,
1. Might be you have configured with wrong Monitor, choose the correct one and enter proper parameter details for key figure
or the issue with the key figure itself. you can refer the notes 1807734 - ST-A/PI 01Q: Advance Corr. BP Analytics - TBIs for ERP, like this lots of note available, refer bpmon advance correction, make sure you applied.
2. Issue might be with the data collection, below guide might help, http://service.sap.com/~sapdownload/011000358700001186112010E/Troubleshooting_for_BPMon.pdf
Thanks
Jansi

Non system disk error or disk error when turned on

I have a BIG problem with my laptop, it doesnt load my operating system! :dead:
I have a 100GB hard drive in my laptop and it was working perfectly fine until a blue screen came up and turned my laptop off!! I turned it back on and it came up with a message saying: ''non-system disk or disk error; Replace and strike any key when ready'' Before that, I have the RAM of 256MB . The RAM themselves had a test and showed no problem at all. When I did go into bios, it didnt give me an option where my laptop hard drive could do a self test, when it should have. So i decided to buy a new hard drive which was 160GB seagate. I put it into my laptop and had my Windows XP CD ready to put into my CD drive to install. BUT...........the same message came up ''non-system disk or disk error; Replace and strike any key when ready'' and didnt read my CD. It keeps doing it now and doesn't read anything from the CD SOMEONE PLEASE...............HELP!!!..................!!!! Does anyone know what I am talking about? If so, please help. Thanks

I kind of know but we really need to know what kind of laptop you are working on here. Seems like it is an old one with XP and 256 megs of RAM.

Hp pavilion 783 error when turned on, keeps restarting

Hi
I have just set up an old HP Pavilion 783 desktop PC (it has been in storgae for a while) and when I turn it on I get the following error message:
Winlogon.exe Application error
The instruction at "0x75978dc1" referenced memory at "0x000000", The memory could not be read.
I get two options - OK and Cancel. I have tried both and all that happens is the system reboots and gets to the same point and same message, so just going round in circles.
I have tried turning it all off, unplugging everything and re doing but no different.
I have also tried running in 'safe mode' but still get this eror message.
Could it have been damaged whilst packed away? is there anything I can do to get it working again?
many thanks in advance for any suggestions.

I kind of know but we really need to know what kind of laptop you are working on here. Seems like it is an old one with XP and 256 megs of RAM.

Error when turning Ipod on

I keep getting an error that says "Connect to Computer Use iTunes to Restore". It is written in multiple languages. I connect to iTunes and restore. It may work fine for 20 playings, it may work correct for one, but I get the same error.

Check these out.
iPod shows a folder icon with exclamation point after disconnecting.
iPod shows a folder icon with exclamation point when you turn it on.
If it needs to be replaced, the iPod Classic will still be under the 12 month warranty.

Error when turning off Windows XP

Hi
I from chile, I don't speak much English but I will attempt
when I turn off the PC he appears me the following error:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP: 0x000000D1 (0x00000048, 0x0000000A, 0x00000001, 0xF9F26D9C)
CX88AUD.SYS - ADDRESS F9F26D9C BASE AT F9F26000, DATE STAMP 3DDD9283
I already downloaded the it finishes version of the driver, but it doesn't pass anything
also the operating system one this updated
please help.
thank you

I posted about this a long time ago. If you use the search engine here (provided it works currently) you'll see what I did.
As mentioned, it's an IRQ issue. This card and it's drivers, do not like IRQ sharing in some configurations. Some share without problems, and other configurations simply wont tolerate it.

Ipod nano error when turned on

When i turn on my nano it shows an icon saying www.apple.com/support..help please? what do i do?
Sony Windows XP

I wish I could help you too. I've run into the exact same problem and nothing that I'm following in the manual is helping. My screen actually says "Do not disconnect." If I toggle with it and try to reset it, then the same screen as you described comes on.
I'm waiting for someone that can help me too.

N95 Software error when turning on

Hi
Everytime i turn on my N95 it comes up with the 'welcome to your new phone' message. It then procedes to try and install the software, but comes up with an error message 'unable to complete installation...' (can't get the rest of it because it disappears too fast.. something about the memory card i think).
Any ideas on the problem? Or how i can fix it?
Thanks
Solved!
Go to Solution.

It looks like you have software installed on the memory card. This sometimes creates this kind of problem.
I suggest you back up what you want to from the card (photos, audio, video etc.) and then reformat it. You can then restore the data you just backed up and install your applications in the phone's memory.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Error message Apple Sync Notifire exe-Entry Point Not Found when turning on my pc

I get an Error Mesage when turning on my PC Apple Sync Notifier exe-Entry point not found. The procedure entry point xmltextreadername could not be located in the dynamic link library libml2.dll. The happened after I connected and sync my IPad.

Try removing iTunes & all of its components, as described here, then reinstalling:
http://support.apple.com/kb/HT1925

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

Error message when turning on IChat

Ichat Is not working will not activate when turned on error message says try again after signing in using Id. Used to work stopped after being in airplane mode for several weeks iOS 6.1.2 iPhone five Verizon is the SP

HI,
Pendantic moment.
Both apps are called Messages on Mac and on iOS devices.
iMessages is just one thing the Mac version can do (it can do everything iChat can do) and the iOS device just uses iMessages when talking to compatible/registered IDs or iPhone Numbers (It will send SMS if not).
Anyway.
An iPhone and the iMessage function at least.
Actually if the App was not working properly before an Update the chances are it will be the same afterwards.
Try this.
On the iPhone > Settings > Messages > Send and Receive remove the Apple ID you are using.
Is the iPhone Number itself ticked ?
If not then place back in Airplane mode for a couple of minutes. (Break with server)
Now start up the iPhone again and try and select the iPhone Number if it still is not ticked in Settings > Messages > Send and Receive.
If the tick is added or gets added then re-add the Apple ID you are using.
At this point any other iOS device using the same Apple ID and/Or the Mac version of the app should have a pop up message about the iPhone using the Apple ID and Phone Number.
7:35 PM Wednesday; March 6, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error message when turning on iTunes Match on my iPhone 5

When I try to turn on iTunes Match on my iPhone 5, i get the following error message:
"You are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe."
I have subscribed. and I updated earlier today. I signed in and out of sharing.

Reading some older threads from 2012 and 2011 it appears the problem was present even then. Part of the problem was due to people using multiple or different account id's on the various devices. In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match. This is very frustrating . . . any help out there? Thanks.

Unexpected error when trying to sign in to sync

Version 32.0.3 installed. I've been getting a message that Firefox unable to sync for the last **days So when i tried to log out of sync and log back in. I get an error "unexpected error" when i try to log in. So i tried to create a new account and get the same issue from the log in page. Have looked at everything listed on troubleshooting sync page Still the same issue.

HI mfackler,
That usually means something has gone wrong. If you have already tried to sign out and back in in accounts.firefox.com please provide the following troubleshooting information for further investigation:
* How do I turn on sync logs:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Please also use pastebin.mozilla.org for sharring any errors that relate to this issue.
Thank you.

Lightroom encountered an error when reading it's preview cache

I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).

The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences.   Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a   LR catalog folder called--->   C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata   (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it.

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

Error when turn on

Similar Messages

Maybe you are looking for