Error when turning Ipod on

I keep getting an error that says "Connect to Computer Use iTunes to Restore". It is written in multiple languages. I connect to iTunes and restore. It may work fine for 20 playings, it may work correct for one, but I get the same error.

Check these out.
iPod shows a folder icon with exclamation point after disconnecting.
iPod shows a folder icon with exclamation point when you turn it on.
If it needs to be replaced, the iPod Classic will still be under the 12 month warranty.

Similar Messages

  • I get an error when updating iPod...

    I've done everything the support tutorial has told me to do and nothing has worked. It used to be a (-36) error but now it just plain says the disk can't be read from or written. I'm tired and want my music, I hope I can fix this soon since I have a trip and would like to bring along my music with me.
    It's a 20GB iPod, not an old model but not a picture or video one.
    Please help!! Thankyou.

    hi toriko!
    It used to be a (-36) error but now it just plain says the disk can't be read from or written.
    just checking. were you working through this article?
    -36 error when syncing iPod in iTunes
    what versions of itunes and the ipod software are you using?
    love, b

  • Error when syncing iPod

    When i try and sync my 5th gen ipod with the itunes on my macbook i get this error message:
    "The ipod cannot be updated. An unknown error occurred (-48)."
    What does this mean and how can i fix it?

    So sorry... I totally overlooked the fact that you said macbook ~.~ However, I did find something on your issue. Try this Discussion Board http://discussions.apple.com/thread.jspa?threadID=792697&tstart=150

  • ITunes displays a -50 error when syncing iPod

    When I sync my iPod with iTunes I get the following error message:
    "The iPod cannot be updated. An unknown error occured (-50)"
    I recently completed a fresh install of my library into iTunes (7.0), then sync'd my iPod. As it was a new library it did a new fresh install to my iPod, but now, every time I sync my iPod it gives me the above message.
    Most notably my podcasts don't appear on my iPod now. I have all the latest updates. Can anyone help?
    Powerbook G4, 867Mhz   Mac OS X (10.4.7)   640 DRAM

    Its not clear what error 50 means. In another context it appears to be something to do with confused or lost authorisation for purchased files for that mac.
    I had that problem - couldn't download purchased songs or play previously purchased ones. In attempting to play them, I repeated the process of "not authorised" errors, then being prompted to authorise, doing so and getting success messages only to fail again. Error 50 as the failure code.
    Try playing some purchased music. Also try purchasing something (like the the free track of the week on the store home page). See if you get the same message.
    I eventually cleared it - though not clear how. All I did was the usual trick of checking permissions, running the maintenance scripts (via Onyx) and rebooting a few times.

  • Unknown error when connecting ipod to computer.  Always worked before.  Any ideas?

    I'm getting and "unknown error" when I connect my Ipod to my computer.  I have always used this computer and it has always worked.  Any ideas?

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • White screen at when turning iPod on

    When my iPod nano 2nd generation has been off for long enough (like 15 mins) and when I turn it back on, I get a completely white screen: it does it consistently. The iPod is on and I can hear the click when I use it. If I turn the iPod off again by holding the play/pause button long enough abnd turn it back on again, then the display is fine and shows me the menu. Anybody encountered the same problem? I did the 5 R's and restored the iPod twice (once resyncing my songs, and once not resyncing because I am planning to bring it back to Apple). I am very disappointed: I have waited 9 months since my birthday in January for a 8G iPod and just got this iPod yesterday. Now I have to bring it back to the store and I hope they will exchange it straight away: I am not willing to wait any more longer to be able to use a $261 iPod (with taxes).
    Lionel
    iPod nano 2nd generation

    This has happened to me twice since I got my ipod this saturday. I noticed that it only did it when I had turned the ipod off while I was fooling around the the photo slideshows. If i hit menu twice then turned the ipod off it came back fine. It hasn't happened constantly with me but I would imagine that if it continues happening alot I will take it back to the store. For me, it would be a hard thing to prove.
    Hope I've helped abit.

  • Unknown error when syncing iPod

    I've been trying to sync my iPod to iTunes but this error comes up.
    +"Attempting to copy to the disk "LILY'S IPOD" failed. An unknown error occurred (-69)."+
    I've tried restoring and it has restored the iPod just fine, but once I connect it to try and sync it again the above error comes up. I've restarted my computer, I've searched for iPod updates. I was using iTunes version 8.0.0.35 and installed 8.0.1.11 and I still get the error.
    Can anyone help me? Thanks

    See if this trouble shooting article helps.
    iTunes displays error 69 when syncing iPod.

  • Error when installing ipod

    i keep getting this error when i connect my ipod to the computer, it doesnt appear in itunes or mycomputer and the Found New Hardware manager says that there was an error while installing the device. when i went into the device manager the ipod was under disk drive and had this error in the device status.
    Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

    OMG! You could sub-title this: "Why Windows Blows" ... I bought a new iPod for my wife - I have to install the sw on the loser windows box because she uses that box.
    The iPod (cd) and/or the iTunes (apple.com download) install blows up either under my admin/unrestricted account, or as her limited-user account with the errors described above. I've followed all the links, etc., and jumped through all the hoops but I still get the %#$! 1607 error.
    When I try, as a windows "super-user" <snort> to reset the perms on the windows/Installer directory, it gives me the appearance of allowing me to uncheck the box and take the directory out of read-only more, but it doesn't actually reset the directory permissions.
    Since windows isn't smart enough to have an equivalent of a chmod 775 command....it looks like we're hosed.
    I'm subscribing to the thread in the hopes that someone can actually figure out how to install this software on Windows successfully....until then, I guess she'll have to manage her iPod on my one of my Macs if it will support multiple iPods....
    Hey ... Apple - how about itunes/ipod support for linux?
    Sigh...frustrated beyond belief; I feel so unclean every time I have to use a windows system...
    --Mike

  • Error when turning on Match on Phone, even with the same ID

    Like many of you, I keep getting the "You are not currently subscribed to iTunes Match" error when attempting to activate the service on my iPhone and iPad. Initially the ID's were different; it was the confusion for those of us who had both .mac adresses that were converted to .me addresses, etc. I set up EVERYTHING across all systems to work with a single user ID, "[email protected]". In the stores on all 3 devices, that's the ID. In the settings, that's the ID. The same, unique password works across all systems. Match was set up and activated perfectly on my Mac. But still the iDevices give me this frustrating error. Help?

    Hi Srujan,
    2 reasons,
    1. Might be you have configured with wrong Monitor, choose the correct one and enter proper parameter details for key figure
    or the issue with the key figure itself. you can refer the notes 1807734 - ST-A/PI 01Q: Advance Corr. BP Analytics - TBIs for ERP, like this lots of note available, refer bpmon advance correction, make sure you applied.
    2. Issue might be with the data collection, below guide might help, http://service.sap.com/~sapdownload/011000358700001186112010E/Troubleshooting_for_BPMon.pdf
    Thanks
    Jansi

  • Ipod nano error when turned on

    When i turn on my nano it shows an icon saying www.apple.com/support..help please? what do i do?
    Sony   Windows XP  

    I wish I could help you too. I've run into the exact same problem and nothing that I'm following in the manual is helping. My screen actually says "Do not disconnect." If I toggle with it and try to reset it, then the same screen as you described comes on.
    I'm waiting for someone that can help me too.

  • File not Found error when synching Ipod

    I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
    The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
    One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

    Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

  • Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

    Hi
    I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
    I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
    i'm not sure what to do next ..any suggestions??
    BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

    Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
    Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
    What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

  • Non system disk error or disk error when turned on

    I have a BIG problem with my laptop, it doesnt load my operating system! :dead:
    I have a 100GB hard drive in my laptop and it was working perfectly fine until a blue screen came up and turned my laptop off!! I turned it back on and it came up with a message saying: ''non-system disk or disk error; Replace and strike any key when ready'' Before that, I have the RAM of 256MB . The RAM themselves had a test and showed no problem at all. When I did go into bios, it didnt give me an option where my laptop hard drive could do a self test, when it should have. So i decided to buy a new hard drive which was 160GB seagate. I put it into my laptop and had my Windows XP CD ready to put into my CD drive to install. BUT...........the same message came up ''non-system disk or disk error; Replace and strike any key when ready'' and didnt read my CD. It keeps doing it now and doesn't read anything from the CD SOMEONE PLEASE...............HELP!!!..................!!!! Does anyone know what I am talking about? If so, please help. Thanks

    I kind of know but we really need to know what kind of laptop you are working on here. Seems like it is an old one with XP and 256 megs of RAM. 

  • Hp pavilion 783 error when turned on, keeps restarting

    Hi
    I have just set up an old HP Pavilion 783 desktop PC (it has been in storgae for a while) and when I turn it on I get the following error message:
    Winlogon.exe Application error
    The instruction at "0x75978dc1" referenced memory at "0x000000", The memory could not be read.
    I get two options - OK and Cancel. I have tried both and all that happens is the system reboots and gets to the same point and same message, so just going round in circles.
    I have tried turning it all off, unplugging everything and re doing but no different.
    I have also tried running in 'safe mode' but still get this eror message.
    Could it have been damaged whilst packed away? is there anything I can do to get it working again?
    many thanks in advance for any suggestions.

    I kind of know but we really need to know what kind of laptop you are working on here. Seems like it is an old one with XP and 256 megs of RAM. 

  • Error when connecting iPod Nano with PC

    I really don't know what the problem with my Nano is. I have tried almost everything, including disabling my antivirus program, but when i try to connnect my iPod to my computer, i keep getting an error message. It says "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to reinstall the iPod's software." Can anyone help me?

    hiya!
    with that error message, the best places to start are with these documents:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod appears in Windows Explorer but does not appear in iTunes
    keep us posted.
    love, b

Maybe you are looking for

  • Display Error Message in BW Report based on Customer Exit Variable

    Hi I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.   WHEN 'ZUPN'. "Here ZUPN is the customer exit variable     IF i_step = 1.      

  • How can I change my iCloud email address witch was wrong typed?

    First time I entered to iCloud updating my iphone th IOS5, and my iTunes to 10.5, I wrote a wrong Email address, and now, I'd like to change (modify, I've to change one character) but I can't. iCloud only let me create alias, but not fix my mistake o

  • Creation & saving PO with Automatically spool

    Dear Expert, I wanted to generate PO out put spool upon creation & afterward saving of PO. I have tried with all means but not succeeded. Output type ( NACE) with Dispatch time 4 instead of 3. Kindly let me know the exact changes to be incorporated i

  • What's my email address - bt wifi

    Trying to set up bt wifi and it wants my @btinternet or bt yahoo email address clicked on link to check what I have and it says no email associated with my account. Can't seem to create one so can't use the free bt wifi any suggestions on how I get o

  • Dump when selecting SoS after adding new column in SoS tab in SRM7.0 SC

    Hi Experts, We are using Classic Scenario with ECC6.04. We added 2 extra column  ( Plant & Sto Loc) in the Source of Supply Tab in the SRM Shopping Cart. I added these fields in webdynpro/SAPSRM/WDC_DODC_SC_I_SOS in the view V_DODC_SC_I_SOS Appended