Error while activating ODS is not caught in the back ground job..
Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar
Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly
Similar Messages
-
Error while activating ODS Object (urgent)
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki. -
Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki. -
Error while Activating ODS data
Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LShi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted. -
Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hariHi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks -
Error While Activating ODS in BW
Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODShi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met -
COMPUTE_INT_PLUS_OVERFLOW error while activating ODS
Hi SDN,
There is 'COMPUTE_INT_PLUS_OVERFLOWu2019 short dump while activating ODS obj in BW 3.1 Version. Will you plz hlp me on this.
Thank youHello,
Download the correction from the SAP Note 1031750 P34:Dump COMPUTE_INT_PLUS_OVERFLOW in CHECK_LAST_STATUPD
Also see SAP Note 658481 BW 2.0B/3.0B(34/16) ALPHA converter for ODS objects - INT
Thanks
Chandran -
Getting Error while activating ODS
Hi Friends,
I have created ODS, while trying to activate, i am getting the following error.
<b>Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325</b>
do u have any idea, to solve this problem
points for sure.....
Thanks in Advance
VijayaHi Vijaya,
How did you maintain the assignment ? check again, the ID is filled ?
click 'suggest source system id' and save ?
similar problems were solved with that, try to check if you miss something
Transfer Rule mapping for sourcesyestem
Error while loading master data from R/3
Red error "No source system ID exists for source system (logical system) A"
Hope this helps.
Cheers
Raj -
Hello BW Gurus,
When I am trying to activate my newly created ODS , the following error is one among the 3-4 errors : "Transfer Structure prefix is not defined for T90CLNT090 system". I am using ECC 5.0:BW 3.5
I followed the steps provided in the following link, but not successfull.
Transfer structure prefix error
I dont find any entries in SLOGSYS(T90CLNT90) & in RLOGSYS(T90CLNT90)..
I need to resolve this error as soon as possible as we dont have the Basis guy at the moment. (as it is not letting me activate the newly created ODS to load the data in it)
Not an issue awarding points.
Thanks,
Vamsi.Hello Mr.Cora,
Thanks again for ur time in relpying me. And Extremely sorry for my late response. I am not in the City these four days.
I guess whatever u have observed is merely correct.
I am in BW learner and I am using an IDES version which is installed in my PC called ECC 5.0 (which should resemble the features related to NetWeaver 2004 and I heard ECC 6.0 should be resembling NetWeaver 2004s)
So ECC 5.0 is a combined package which has SAP R/3BW 3.5mySAP Components etc..
I Login using SAPUSER as my user ID and 800 as my client with a certain password and enter into SAP environment and then I use RSA1 to enterinto BW Administartor Work Bench (we could fix a transaction to directly switch to that screen though soon after we login)
I did not do any system copy and I dont have a specific separate landscape system and as u said mine should be Development system as My Application Server's name is: SAP_DEV_00.
I have 3 logical Source Systems defined:
<b>1.</b> It is the main ID i.e., T90CLNT090 with 800 Client( which is defined at the time of Installation of ECC 5.0)
<b>2nd</b> and <b>3rd</b> are the Flat file source system which are defined by myself for my flat file loading purposes.
<b>Note:</b> I have Database, Application and Presentation layers in only one CPU(i.e., in my PC alone)
And Mr. Cora plz let me know the Following:
1.The conventional Landscapes and their logical names (for Non-Netweaver versions like SAP R/3 till 4.6X versions and for Netweaver 2004 &2004s versions). and
2. Does the Different landscape environments eg; DEV, QA,PROD have same Logical Sorce systems defined?? or Different ones??
Hope now u have a good idea about what I have it with my PC.
As I am not able to activate my ODS .. I am not able to load my flat data or any data.. so that I could move on with my preparation!!
Any kind of help in this reagard is more than a help for me..
thanks,
Vamsi. -
Error while activating ODS Object
Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
RajRaj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti. -
Error while Activating ODS 0FIGL_O02
Dear All.
i load the data from R/3 into my ODS 0FIGL_O02 it loads succesfull in PSA and then into ODS with green light, but when i try to activate the request it gives me following error.
Value 'As Per Nabeel' (hex. '41007300200050006500720020004E0061006200650065006C') of characteristic 0DOC_HD_TXT contains invalid cha.
Now where is the invalid character in the value, on top of that i am not able to find that record by search in Document Header Field in New Data Table and also in PSA i am trying like this.
in Document Header Text i provide the value As Per Nabeel, and also Nabeel but not able to found the record so i can see what is the problem.
what i can see the error log is the Data Package number is there any way to found the detail for this record.
How to found this record in PSA or in New Data table as per the value specified.
in RSKC i have given the following value ALL_CAPITAL_PLUS_HEX.
Please guide me to resolve the following issue.
thanks and best regards,Hello,
It is better to use rutine to aviod invalid characters: just replace YOUR_FIELD
DATA: l_user_allowed_char TYPE rsallowedchar,
l_all_allowed_char(140) TYPE c,
l_result_str_len TYPE i,
l_str_increment TYPE i.
CONSTANTS c_sap_allowed_char(58) TYPE c VALUE
' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
IF l_all_allowed_char IS INITIAL.
SELECT SINGLE * FROM rsallowedchar
INTO l_user_allowed_char
WHERE allowkey = 'S'.
CONCATENATE c_sap_allowed_char
l_user_allowed_char-allowchar
INTO l_all_allowed_char.
ENDIF.
RESULT = TRAN_STRUCTURE-YOUR_FIELD.
TRANSLATE RESULT TO UPPER CASE.
l_result_str_len = STRLEN( RESULT ).
l_str_increment = 0.
WHILE l_str_increment <> l_result_str_len.
IF NOT RESULT+l_str_increment(1) CO l_all_allowed_char.
RESULT+l_str_increment(1) = ' '.
ENDIF.
ADD 1 TO l_str_increment.
ENDWHILE.
BR
Ondrej -
Error while activating queue XBTI*
Hi All,
When I triggered the message i have seen the message in Green Color in MONI.
there by i went to SMQ2 and have seen the message that is strucked in the queue XBTI0001.
After that i have deleted the queues from SMQ2 and De-registered the queues and Registered the queues again. in SXMB_ADM
There by i Activated the Queues in the same screen.
then i got the Error as Error while activating queue XBTI
What could be the problem with this activation
REgardsHi Prateek,
That activation and all is working now,
but the problem is iam trying to restart the successfully processed messages in MONI through
this Blog
Michal Krawczyk's Blog
The specified item was not found.
Every thing has been followed as explained in the Blog.
I took the message ID of the Successfuly processed message from MONI and when i execute the report.
Each and every time The message is comming to MONI with GREEN Status .
Then if i goto SMQ2 , ther i can see the queu with the description saying that SYSFail
and if i manually trying to release the Queue means it is saying Running and immediately turning into the same SYSFail state
The queue is not at all getting Free.
This is the problem
Regards -
Error while activating the Business Content
Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.SAnd also check whether there are any dumps in ST22.
Khaja -
Error while activating multiple requests in ODS.
Hi All,
I get a "ORA-12801: unable to extend temp segment" error while activating an ODS. The problem is I selected 7 requests for activation and my Basis guy tells me he cannot add any more files to the temp tablespace.
I guess the solution would be to re-activate one request at a time. However now the dependency has been enforced between the requests and I cannot activate a single without selecting the other requests.
I even, subsequently, selected "Do not condense option..." AND the "Process Request serially" options. I get the same error.
Is there a ABAP report that can turn off this inter request dependency ?
Thanks.
Dorothy.Thank you for the quick reply !
Dinesh: I looked at the note. It applies to oracle systems < 9.2.0.6. We are at 9.2.0.6. The paramter COMPNOMERGE is missing in RSADMIN table. The note however is right on the money for the problem I am experiencing.
Bhanu: I applied your suggestion. The test yielded no errors. -
Error coming while activating ODS
Hi,
While loading data in datasource there is a field item text in which a small box is coming due to which error is coming while activating ODS. When i check line item of datasource it shows me '#' instead of that box.
So i wrote a code in ECC to remove special characters. But still it is not deleting that small box and sending me error in ODS.
The data comes same in the table also with that small box.
Please tell me how to solve that problem as i cant do it manually as there are a lot of records. Do tell me how to remove it.
RomaHi Roma,
Actually all the invalid characters in the error message are displayed by small square box only. So you might not get which actual character it is.
Check the below given article for removing special character. In this article they have mentioned one standard FM to remove the characters which you can use in update rule or transformation for filtering invalid characters.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cdc928-5e2d-2e10-e1bb-ec77bcb5cbfd?QuickLink=index&overridelayout=true]
Regards,
Durgesh.
Maybe you are looking for
-
Google chrome will open as will internet explorer but not firefox.
-
Desktop Manager Problem on Windows 7
I have DM 5.0.1.28 running on Windows 7 and I just purchased a new Bold 9000. I am able to send/receive files to the Bold using Blue Tooth with my computer software, but am unable to sync using Blue Tooth with the DM. I connect to the DM fine but w
-
Photoshop Elements 2.0 Help Please!
I just installed Photoshop Elements 2.0 and when I go to open it I get an error message saying that the program "Could not initialize Photoshop Elements because the scratch disks are full. This is definately NOT because of my computer's processing po
-
WHEN ON A WEBSITE IF I CLICK A ADOBE FILE IT GIVES A RED X AND SAYS DOWNLOAD ADOBE SO I DO THEN
I DOWNLOAD AND IT STOPS AND SAYS I AREADY HAVE A PROGRAN ON THIS MACJHINE ??? HELP I HAVE ADOBE X BUT ALSO HAVE NUANCE PDF CONVERTER IS THIS WHAT IS BLOCKING ME AND HOW DO I FIX
-
D110a loss of communicat​ion on 1 computer in a network
I have a home network with 2 destops and a laptop. There is one desktop that doesn't work all the time with the printer. I've unistalled and reinstalled the software several times but nothing seems to work. Yesterday I did that process again. I got