Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

Similar Messages

'L_CHAVL_IN' Error while Activating Update Rules.

Hi All,
 when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
 i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
 Please give me a solution how to solve this.
Regards,
Ramana.

Check the following SAP Note (# 782858)
Symptom
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
Other terms
Syntax error; generation; l_chavl_in; update rules
Reason and Prerequisites
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
Solution
BW 3.0B
 Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
 Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
 Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.

ABAP Runtime error while activating Update rules.

Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.k

Hi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k

Error while Activating update rule in BW

Hi,
I am getting an ABAP dump while activating an update rule. The rule is from DSO to cube.
"MESSAGE_TYPE_X" " "
"%_T020N1" or "%_T020N1"
"INSTANTIATE"
I have added some new fields in a DSO. The rule is from DSO to cube. While activating it, I am getting this ABAP dump. There are few other rules from this DSO to other DSO which got activated but this one is causing dump.
Any ideas/suggestions on this would be really helpful.
Thanks,
Naveen

Hi
Check if your Cube , DSO and UR's are active. If not reactivate them. Ideally you could recreate the UR's and check the status by running the extraction.
I would also recommend to use elimination method to check if any particular field is creating an issue. While recreating the UR's , create them for a few fields - active - check extraction - this will also let you know if the issue is within any oif the rules.
Cheers
Umesh

Error while transporting update rule.

Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
      Errors when activating update rule XXX
      IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
Swati

Hi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No     Objects in Request
1     Package(DEVC), InfoArea(AREA), Application Component(APCO)
2     Function Modules
3     Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4     Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5     Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
                Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
                and Tables (TABL)
6     Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7     Update Rules(UPDR, ROUT)
8     Infopackages(ISIP)
9     Queries(ELEM)
10     Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha.

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error while transfering update rules

Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

Error while activating Trnasfer rules

I am getting the following error, while activating Infosource. Can you please help me identifying the solution
Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
Diagnosis
"ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or ...

Hi,
Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
1. Drop the Source System
2. Re-Create the Source System.
3. For other than PC Files, "Replicate the DataSources" in the Source System.
4. Try mapping the transfer rules / structure and activate it.
Also check the SAP Note no :147195
Hope this works.
Regards
Pavan Prakhya

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

ASSERTION FAILED error while migrating update rules

Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
      But while migrating update rules ASSERTION_FAILED runtime error occurs.
       the assert condition was violated.
       CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind

Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

Activating SIS structure error while maintaining update rules

Hi Experts
please reply <removed by moderator>
i am trying to activate self defined SIS structure but at the time of creating maintain update rule in transaction MC24 i am getting error
please guide what i am missing
DDIC structure S990 for info structure S990 not active in Data Dictionary
Message no. M2464
Diagnosis
It is not possible to maintain the updating procedure since DDIC structure S990, which belongs to info structure S990, is not active.
The info structure has probably been saved but not generated.
Procedure
The info structure must be generated.
Regards
Abhi
Message was edited by: Manish Kumar

Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba

Getting error while activatinb update rule 2LIS_02_SCL

Hello BW gurus,
I have activated and replicated datasources for PP and activated the 0PUR_C01 infocube now I am activating the update rule 2LIS_02_SCL but while activating the update rule iam getting error message
"Object UPDR CD2NYEJKIIFCCFA9FW1OQRONE could not be found"
which is nothing but the technical name of 2LIS_02_SCL. in GROUPING TAB I have selected " only necessary objects" option.
Any help on this is greatly appreciated can you please suggest me how I can troubleshoot this.
I will assign points to all appropriate answers.
Thank you,
Krish

Hi Krish
Don't worry about the error message.
RSA1-> Business content-> here select the update rules from 2LIS_02_SCL to cube 0PUR_C01 and with only necessary objects option-> Install update rules with applicable routines. Then refresh RSA1 and check for update rules. If still you don't get update rules, please let me know
Regards
Pradip

Error while activating update rule in Inventory

Similar Messages

Maybe you are looking for