Error while altering a table.
Hi All,
When i tried to alter a table. I got the following error.
SQL> ALTER TABLE SALES_ORDER_TRANS_IHST ADD(SUPER VARCHAR2(1),REASON_CD VARCHAR2(10));
ERROR at line 1:
ORA-00069: cannot acquire lock -- table locks disabled for SALES_ORDER_TRANS_IHST
Then I tried to enable table lock for that table. Again got error.
SQL> ALTER TABLE SALES_ORDER_TRANS_IHST enable table lock;
ALTER TABLE SALES_ORDER_TRANS_IHST enable table lock
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
ORA-00054: resource busy and acquire with NOWAIT specified The table is currently in use by something else.
Werner
Similar Messages
-
Error while altering a table in Oracle Portal
i have a table with primary key. i realize that the primary is not required and when i get rid of primary key thru Oracle Portal and say OK ... i am encountered with the following error -
Error:
ORA-25150: ALTERING of extent parameters not
permitted (WWV-11230)
Failed to parse as PORTAL30 - alter table
BPSITEST.JEN_TEST_PRIMARY_KEYS
drop PRIMARY KEY
modify(
EMP_ID NUMBER(10),
LAST_NAME VARCHAR2(10),
FIRST_NAME VARCHAR2(10))
PCTFREE 10
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
ENABLE CONSTRAINT SYS_C003038 ENABLE CONSTRAINT
SYS_C003039 ENABLE CONSTRAINT SYS_C003040
(WWV-08300)
Any Ideas .... anyone ... ??
thanx
nullORA-00054: resource busy and acquire with NOWAIT specified The table is currently in use by something else.
Werner -
Hi
Please let me know reasons for this below error
Error starting at line 32 in command:
ALTER
TABLE DEVELOPMENT.BRANDING_STRINGS
ADD
CONSTRAINT frk_strings_brandingsdetails
FOREIGN KEY (CUSTOMIZATION_ID)
REFERENCES BRANDING_DETAILS (CUSTOMIZATION_ID)
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list
02270. 00000 - "no matching unique or primary key for this column-list"
*Cause: A REFERENCES clause in a CREATE/ALTER TABLE statement
gives a column-list for which there is no matching unique or primary
key constraint in the referenced table.
*Action: Find the correct column names using the ALL_CONS_COLUMNS
catalog viewRaunaq wrote:
The last thing it needs is people begging to gain points for themselves so that they can boost their ego by trying to reach "Guru" status to impress their friends
What are you ?
How can you make out that i am doing this to impress my friends?
What you could have simply done is that you should have told me that don't ask for point ? You can use better and decent english.
And how can you image anybody is interested in your long lectures ?? Still
Purvesh was quoting from the forum FAQ: Re: 13. How do I answer a question on the forums?
It is not acceptable to ask for points for your answers. The site admiinistrators have expressed that this is not acceptable behaviour. Such posts can be deleted or edited and continued breach of this could result in termination of your account.
As such, your post is now going to be edited to remove your begging for points. -
Hi All,
i got an error while dropping a table which is
ORA-00600: internal error code, arguments: [kghstack_free1], [kntgmvm: collst], [], [], [], [], [], [], [], [], [], []
i know learnt that -600 error is related to dba. now how to proceed.
thanks and regards,
sri ram.00600 errors should be raised as service request with Oracle as it implies some internal bug.
You can search oracle support first to see if anyone has had the same class of 00600 error, and then if not (and therefore no patch) raise your issue with Oracle.
http://support.oracle.com -
Error while loading AS400 table
Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
davidPosted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david -
Full Load: Error while executing :TRUNCATE TABLE: S_ETL_PARAM
Hi All,
We are using Bi Apps 7.9.6.1. Full Load was running fine. But Now we are facing a problem with truncating a table "S_ETL_PARAM".
I have restart informatica Server And also DAC Srever. But still I am getting the same in the DAC Log as, *"NOMALY INFO::: Error while executing : TRUNCATE TABLE:S_ETL_PARAM*
*MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DBConnection_OLTP:SIEBTRUN ('siebel.S_ETL_PARAM')*
*Values :*
*Null Map*
*EXCEPTION CLASS::: java.lang.Exception"*
Any Suggestion.....
Thanks in Advance,
Deepakare you trying to run incremental load when you get this truncate error? can you re-run full load and see that still runs ok? pls also check your DW side database logs like alert lor any DB level issue. such errors do not throw friendly messages in DAC/Informatica side.
-
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
Timeout error while filling setup tables
HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM -
3-1674105521 Multiple Paths error while using Bridge Table
https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
TeikThe strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use. -
Out of Disk Space Error while Generating Pivot Table
Hi!
I encountered the following error while Generating Pivot Table -
View pivotTableView!1 returned the following message:
Odbc driver returned an error (SQLExtendedFetch).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
Location: saw.odbc.statement.fetch,
saw.cube.engine.execute.dataTraversal, saw.cube.engine.execute,
saw.cube.cache.processCube, saw.views.pivottable.displayer,
saw.subsystem.portal, saw.httpserver.request,
saw.rpc.server.responder, saw.rpc.server,
saw.rpc.server.socketServer, saw.threadPool, saw.threadPool,
saw.threads
File: ./project/webodbcaccess/odbcresultsetimpl.cpp, Line: 182
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError:
10058] A general error has occurred. Out of disk space. (S1000)user11204020, what's your question?? :)
You're getting an out of disk space error ... which means you've run out of disk space, no?
Since it's saw related I'm guessing you'll need to make more space available to your OracleBIdata/tmp directory -
DAC: "error while reading repository table". Please help!
Hi everybody,
I copied DAC directory from server to a workstation.
DAC client on server machine runs normally.
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
I tried to find any DAC log file to get some additional information, but I couldn't.
The connection in DAC seems to be configured properly (test connection successful).
The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
Thanks,
AlexSo you can read the tables now? Good to know.
Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
@DAC client can't connect to server: i.e. the icon stays red?
- Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
- Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
Cheers,
C. -
DAC: error while reading repository table
Hi everybody,
I installed DAC (copied from server to a workstation).
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table"
The connection seems to be configured properly (test connection successful).
DAC client on server machine starts normally.
What can be a problem?
Thanks,
AlexHello again!
Has anybody seen this problem?
What can it be?
Where can I find DAC logs?
Cheers,
Alex -
Hi All,
I am facing issue while shrinking a table PARAMETER_DETAIL which is a IOT partition table.
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for Solaris: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
SunOS usa0300ux636 5.10 Generic_138888-03 sun4v sparc SUNW,Sun-Blade-T6320
When i am firing the below query,
alter table PARAMETER_DETAIL SHRINK space CASCADE;
alter table PARAMETER_DETAIL SHRINK space CASCADE*
ERROR at line 1:
ORA-10635: Invalid segment or tablespace type
I am getting this error.
Moreover, I have checked in dba_segments, the output is
SQL> l
1 select unique SEGMENT_NAME,PARTITION_NAME,SEGMENT_TYPE,TABLESPACE_NAME from dba_segments where SEGMENT_NAME='PARAMETER_DETAIL'
2* and OWNER='CDE'
SEGMENT_NAME
PARTITION_NAME SEGMENT_TYPE TABLESPACE_NAME
PARAMETER_DETAIL
PD_201107220130 INDEX PARTITION DATAFEED
PARAMETER_DETAIL
PD_201107211630 INDEX PARTITION DATAFEED
PARAMETER_DETAIL
PD_201107212030 INDEX PARTITION DATAFEED
SEGMENT_NAME
PARTITION_NAME SEGMENT_TYPE TABLESPACE_NAME
PARAMETER_DETAIL
PD_201107212100 INDEX PARTITION DATAFEED
PARAMETER_DETAIL
PD_201107210330 INDEX PARTITION DATAFEED
PARAMETER_DETAIL
PD_201107210630 INDEX PARTITION DATAFEED
SEGMENT_NAME
PARTITION_NAME SEGMENT_TYPE TABLESPACE_NAME
PARAMETER_DETAIL
PD_201107210830 INDEX PARTITION DATAFEED
PARAMETER_DETAIL
PD_201107211030 INDEX PARTITION DATAFEED
1490 rows selected.
SQL> select TABLESPACE_NAME,SEGMENT_SPACE_MANAGEMENT from dba_tablespaces;
TABLESPACE_NAME SEGMEN
SYSTEM MANUAL
UNDOTBS MANUAL
SYSAUX AUTO
TEMP MANUAL
USERS AUTO
DATAFEED AUTO
6 rows selected.
Please help me out to shrink this table.
Thankshttp://download.oracle.com/docs/cd/B19306_01/server.102/b14231/schema.htm#ADMIN10161
Shrink operations can be performed only on segments in locally managed tablespaces with automatic segment space management (ASSM). Within an ASSM tablespace, all segment types are eligible for online segment shrink except these:
IOT mapping tables
Tables with rowid based materialized views
Tables with function-based indexesSince this is an IOT, any chance there is an IOT mapping table?
Since this appears to be a data warehouse, any chance there are ROWID based materialized views or function-based indexes?
Justin -
Error while creating temporary table
Hi All,
I am trying to integrate ODI and BAM . I have followed all the steps given in the guide.While creating interface i am getting the error while LKM is working.
I am using LKM SQL to SQL and IKM Oracle BAM Insert ( as the inserted data should be captured after inserting).
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bam_odi.htm
Please use this link for clarification.For me drop work table and create work table failed (C$ -work table). Anyone have any idea about this could you help me?
Thanks in advance,
GnanaprakasamIt seems the table(MMMORDERFILE_C$_REQUEST ) already exist in the work schema,so cant able to create and throw an error. can you tell me which KM you are using?
Maybe you are looking for
-
Why is 'send' disabled for sending a message on my iPod touch?
I can receive messages, browse the net, connect to iTunes so there is nothing wrong with my connection settings. I also have the latest iOS installed. I can type a response to a message, but can't send because the send button is disabled.
-
User Defined Function (UDF) help required. Pls advice urgent.
Hi , CRM -- XI (UDF) -- Socket Connection Now in User Defined Function (UDF) of Message Mapping I will open Socket Connection. Send CRM XML request to socket and get XML response from Socket and then map to some system. Can I write Java Class code in
-
Can't rename Layers in Flash CS4 - Revisited
My testing on the Mac side is pointing toward the Behaviors palette as to the culprit in this issue. As soon as I open that palette in my workspace, the ability to double click on a layer name in the Timeline palette stops. I have to right click and
-
Entering Tax Only Invoice in AP
Hi Guys, We are able to Import Invoices with Tax Only Line by Setting PRORATE_ACROSS_FLAG as N which is populated in AP LINES. Tax lines gets poulated from Payable Interface to ZX_LINES with Tax only Lines as checked. But when we are trying manually
-
I was moving bookmarks in safari and 2 complete folders have emptied their contents. The folders are still there. I don't have a working time machine and icloud has caused the relevant folders to disappear from all my machines, iPhone, iPad and iMac