Error while Asset retirement by scrapping.

Hi ,
We are getting following error while doing asset retirement by scrapping using transaction ABAVN.
"Transaction in area 10 contradicts the net book value rule." Message no. AA660.
Following are the asset values.
Area 01   : Acq. value 64578.00,  Ord depre 12806.92 ,  Net book value: 51771.08.
Area 10   : Acq. value 64578.00,  Ord depre  29970.80,  Net book value: 34607.20.
Pl. help
Shripad

Hi,
when trying to retire an asset linked to  a group asset, please carefully check the  values on your group asset.
Sometimes the error occurs if a dep. area is assigned to a group asset and the transactions on this area amount to zero.                                                                               
May I invite you to review below notes also. You may find, that certain constellations with your situation could    
be valid, too.                                                                               
136634 AA660 Credit memo in subsequent year                            
32901  General information on the memo value                           
14028  Error message AA660 or 632 during retirement/transfer           
141656 Negative net book value, neg. APC, below zero depreciation      
327088 Definition of the delivered transfer variants 
regards Bernhard

Similar Messages

  • Error while asset trasfer

    Dear all,
    while doing asset trasfer we r getting error that balancing field "profit center" in line item 001 is not filled
    we r using 6.0 version and we assigend the profit center correctly only.
    plz respond as soon as possible.
    Thanks
    Anitha.

    Hi,
    In the T.Code ACSET check for the company code whether Account Assignment Object KOSTL is activated for all Transactions for Account Assignment Type APC value posting and Depreciation Run.
    If you fill this and assign the cost center in the asset master then you can get rid of the Balance Filed Profit Center error in your transactions.
    Regards
    Balaji

  • Error while  Asset settlement

    as i have transferred last year internal order balance to the new internal order in this year.
    and when i was running th Ko88 for AUC to main asset settlemnt it gave me below error.
    <b>Error during acquisition transfer: Depr. area does not exist
    Message no. AAPO107
    Diagnosis
    According to the specifications for transfer variant 5, depreciation area 02 should be transferred gross. However, the recieving asset 1100 1000008-0 does not manage this depreciation area.
    Procedure
    Check the transfer variant and the receiving asset.</b>
    i am confused wht it is?
    please reply asap
    thanks

    lidia
    i have a below complex situation.
    user has posted value to IO and they settled it to AUC in last year but they did not settle it to Main asset.
    so anyting they have settled to last year to AUC, now it needs to be settled to Main asset but it is not allowing me to do that and shooting me error that ''First settle items from the previous year in the previous year"
    so how can i settle AUC amount to main asset which was settled in last year?
    please help

  • FA Retirement- 21151: error while posting asset document: '100000039'

    Hello Experts,
    I have a client who encountered this error during fixed asset retirement - scrapping.
    After selecting the asset to be retired, sap did not assign an account in the account column, but the user
    was able to save the document.  After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'.  The document number the systems is referring to is the last document saved but sap did not assign an account code.
    Please help. My client is using sap b1 8.81 patch5.
    Regards,
    Luz

    Hi Too Mui Hwee,
    What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
    Thanks

  • Posting of retirement/transfer not possible(error in asset)

    Hi All,
    this is regarding intra company asset transfer through transaction code ABUMN. The issue is like below :
    Let's say asset code is 764 in 111 asset class & i am transferring this asset to 3615 in 112 asset class through ABUMN.
    Actaully in 2004, a part of the asset value has already been retired with scrap.So now the requirement is complete transfer the remaining amount. So while trasfer, the error shows and not allowing to post the transaction.
    There are several depreciation areas in the asset. The depreciation has been calculated for all the dep. area except 42(for US)
    As this book has pending the dep. since 2004, system doesn't allow to trasfer this asset. For this purpose, i have tried AFAR, ASKB but the issue is not solved.
    Kindly revert back with your valuable suggestions.
    Thanks,
    Raj

    Hi Raj,
    In most cases AA 465 is due to recalculation errors in the past on the asset in question. From your information I assume this is probaby due to depreciation area 42.         
    I do not know how you were able to close all following fiscal years if errors existed         
    on the assets with pending depreciation since 2004.                                                                               
    As you known, the indicator ANLC-XAFAR gives the information about errors in the calculation of depreciation.                                                                               
    0 No error occurred during depreciation calculation                                             
      1 Error occurred in depreciation calculation from previous yrs                                  
      2 Error occurred in depreciation calculation of current year     
    At this point it may be necessary to execute the report RACORR52 for the fiscal years   
    that may be closed now and for which the asset in question seems to have an incorrect entry for ANLC-XAFAR. You have to carefully check the asset beforehand though, to be sure that the values on the asset as such are correct as per your expectation.  Only then should you consider using the correction report RACORR52.        
    Please review the attached note in this regard, and follow the instructions given:                                                                               
    103749     -   RAJABS00: Error message AU069                                                                               
    This report is not in your system until you manually apply this source code.                                                                               
    Also review SAP note 141656 as it might help, too.                                                                               
    I hope this information helps you further.
    Kind regards,
    Brigitte

  • Error while doing asset retiremnt entry

    Hi,
    While doing Asset Retiremnt through f-92 sale with revenue to customer.
    Geeting error message as ' Auxiliary Account Assingment to asset not possible, remove entry"
    I have given 1st line tem as customer account 2nd as asset sale offset account.
    Also ticked on that asset retiremnt check box and selected appropriate asset.
    Pls help...
    Regards
    Raj

    Hi,
    According to ur threat it seems like you have entered the asset number in account assignment part of document entry.
    you are not suppose to enter any asset number, which is to be retired  in the line item.
    first line item will be customer Debit
    second line item will be with posting key 50
    GL account (Offsetting Account)
    enter the value
    dont enter the asset number in the asset number field.
    just select asset retirement check box only
    once you selected the asset retirement check box, you will get one pop up screen, it will ask you to enter the asset number, here only you are supposed to enter the asset number, asset value date, complete retiement check box (if you need ).
    then press continue button
    simulate
    post
    This will defenitely solves ur issue.
    Please do not forget to assign score to me
    Thanks,
    Srinu

  • Fixed asset error: 21151: error while posting asset document: '100000039'

    Hello Experts,
    How are you? We have a client who have encountered an error during fixed asset retirement thru scrappingu2026.In one retirement document, SAP did not assign an account in the account column but still the document was saved but with erroru2026On her next retirement document, she could no longer save her document and the error points to the last retirement document she has saved with error.  We have tried to cancel the document and its journal entry but still she could no longer retire assets  using scrapping.  All other retirement transaction using scrapping could not be saved.
    The client is using SAP B1 8.81 patch 5. 
    Thanks and best regards,
    Luz

    hi Luz Cornejo,
    please do check this SAP Note: [1246921|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303132343639323126]
    regards,
    Fidel

  • Error while posting asset acquisition

    hai
    while posting asset acquisition in f-90 iam getting error that "asset is incomplete' when analysed using RAUNVA00 , it is asking to update field group-22 i.e scrap value, but this field is not found in asset master, pls help me.
    thank u
    shivaji.a

    In AS02 you go the Depreciation key and double click on the depreciation key. In the following screen "additional Specifications" you give Scrap value.

  • Asset retirement - Error - AA416 & AA324

    Dear All,
    I am getting following error while doing asset retirement through t-code F-92.
    My legacy transfer date is 31.03.2009
    I am retiring last year legacy asset.
    For few of the asset class I am getting this error. For few of the asset I am not getting this error.
    *Following is the Error 1 detail:*
    Retirement of old assets data not possible (No existing old assets data)
    Message no. AA416
    Diagnosis
    You have tried to post an retirement based on amount, using a transaction type which refers to old assets data (acquisitions from previous years).
    However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
    Procedure
    Check the transaction type entered and the asset.
    _Following is the Error 2 detail:_
    For few of the asset while retiring I am getting the following error. I also try with transaction type 260. But the same error I am getting.
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Regards,
    nms

    Dear Phaneendra,
    Thanks.
    Even I tired with 260 transaction type, but I am not able to retire the asset.
    Retirement of new acquisition not possible (Transaction total = 0)
    Message no. AA417
    Diagnosis
    You have tried to post retirement of current acquisitions, although the sum of the transactions for the current fiscal year is zero.
    Procedure
    Check the transaction type entered and the asset.
    Regards,
    nms

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error while doing ABGL Asset Credit Memo

    Hi Friends,
    I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
    Balance for transaction type group 10 negative for the area 01
    Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
    Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
    If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
    Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
    Thanks
    Sunil

    Hi,
    If the asset has been capitalized during earlier years, use ABGF to post credit memo.  ABGL is meant for assets capitalized during the year.
    Best Regards,
    Madhu

  • Error while creating a new asset in BCC.

    Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
    /atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
    atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
    [Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
    Kindly suggest...

    As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
    Coming to ur error:
    From the logs  it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
    <add-item item-descriptor="mapMode" id="AmMmDef">
      <set-property name="name"><![CDATA[AssetManager.default]]></set-property>
    </add-item>
    I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
    Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
    Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
    Thanks,
    Nitin.

  • Error while posting asset aquisition

    Hi to All,
    I am getting following error while posting aquisition entry.
    "Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
    I had made all settings what the error says above but still error persists.
    PLEASE ITS VERY URGENT
    tanuja

    Hi tanuja,
    Please check the setting in the T- code OABT.
    If it helps pls reward some points.
    JS

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • Error while doing F-90 Asset Acquisation

    Hi,
    I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
    Tax code V1 country IN does not exist in procedure TAXINN
    Message no. FF713
    Diagnosis
    You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
    Create a new tax code if necessary.
    Caution:
    Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
    Thanks
    KB

    Hi,
    you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
    and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
    Try.... if not working let me know....
    Regards,
    MOhan.

Maybe you are looking for

  • Is there a way to set an alert for every event in a single calendar?

    Hi all, Is there a way to globally set an event in just one of the calendars showing in iCal? For example, I have a "Birthday" Calendar with a bunch of birthday events.  I want to set the alert for all of them to, say, noon, without having to edit ea

  • Disk disconnect error when connecting a drive?

    Can anyone help with this Firewire problem? I have a recent MacBook Pro running Lion and three firewire LaCie drives of varying vintage. All three are connected to the Mac's single FW port using a FW hub. Day to day 2 of these drives are always conne

  • How do u turn in emails & mark as spam & block phone numbers.

    I can not figure out to mark an email as spam & keep it from emailing again.   Also how do I block someone from calling me Or atleast make it where it only comes through in an emergency & with only my permission.      I have voice control but I don't

  • Which table could let me check sales order type when giving dlv order info

    Hi, Suppose you got the delivery order detail like delivery number#,dlv type...etc... From which table link could we find the corresponding sales order type??? Is there any table indicate the document flow, and with that then i could find the sales o

  • Image file used for "Image Fill"

    Hi, In the "Road Trip" iWeb template there is a wood background. I want to create a square shape and use "image fill" to make it look like wood. Where do I find the image they are using for this fill? , Jonathan Power mac G5   Mac OS X (10.4.6)