Error while attaching a image in forms10g envion..

hi
i am getting this error while attaching a image in forms 10g enviornment.
ERROR>WUC-24 [URLDownload.pullFile()] Error reading URL http :// 10.80.50.222:7778/forms90/webutil/jacob.dll
regards
Geo.

did you install jacob ? with the correct version number described in the installation-guides.
jacob is not an oracle tool, which normally is only useful for COM-commands against windows.
What did you do with the image?

Similar Messages

Error While loading a image from database

Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
Nats

Hi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!.

Js-error while executing Multiple Image Upload wizard

If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peter

That again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Error while attaching Calendar

Hi
How can we attach the calendar with forms10g.I downloaded from otn the latest version and attached the calendar90.pll, which contains the Date_LOV package in my application and called DATE_LOV in KEY-LISTVAL trigger but its giving error Date_LOV is not a procedure or is undefined.What i need to do to attach a calendar with my application
rgds
ros

Hi
These are the lines,I didnt get in the first step.I attached the calendar90.pl and called the Date_LOV in Key-Listval trigger
To create a calendar:
1) From the Components page of the reusable_components.olb object library, copy or subclass the Calendar object group.
2)Attach the PL/SQL library calendar90.pll, which contains the Date_LOV package, to your module.
3)Create a Key-Listval trigger on the date item for which you would like to use the Date List of Values window. Add code to display the calendar using the Date_LOV package.
4) If you want the end user to be able to close the Date List of Values window by clicking on the window close button in the title bar, create a form level When-Window-Closed trigger
rgds
ros

Error while uploading BITMAP image in SAP through SE78.

Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.

Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav.

Error while attaching the document using Method add_attachment

Hello Friends,
We are getting an error while using the BCS Class Method for attaching the documents to the mail.
We are using method: add_attachment()
For this I am passing the parameters:
attachment_type: PDF
attachment_subject: XXXXXXX
att_content_hex: content_hex[] "Internal table
The system is throwing error message X_ERROR.
Friends please help me in how to rectify the error message.
Thanks and Regards
Pradeep Goli

Hi,
Please code as below.
data: binary_content type solix_tab.
CALL METHOD Document->add_attachment EXPORTING i_attachment_type = u2018PDFu2019
i_attachment_subject = u2018My attachmentu2019 i_att_content_hex =
binary_content.
Regards
chitra

Error While attaching LE to OU(11.5.10.2)

Hi all,
While attaching LE to Operating unit in HRMS i am getting dis error. Appln is 11.5.10.2
"ID & ID for the flexfield segment Legal Entity does not exist in the value set HR_ORGDDF_OUI_LEGAL_ENTITY. (VALUE=112)
Thanks
Dinesh

Pl see if these MOS Docs can help
LOV for Legal Entity or Set of Books from Operating Unit Information Missing Selections          (Doc ID 354008.1)
Adding Accounting Information or Operating Unit Information fails with APP-FND-1564: ORACLE error 17          (Doc ID 364265.1)
Organization Operating Unit Set of Books LOV is NULL          (Doc ID 353970.1)
HTH
Srini

Signature error while attaching document in vendor master

Hi
While attaching word docuemnt in vendor master through"Store business document" option, I am getting below error
HTTP Error: Signature verification failed :No valid signature
Could you please how can we avoid this error so that the document will get stored successfully
Regards
Subbu

Resolved.
Filename path was not correct.

Error while starting VM Image

Hi All
I am getting the following error while starting my vm image...
Start - /OVS/running_pool/135_Trade_finance_Upgrade
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/413DC32013614CDCB5A4268266CF4DCF/running_pool/135_Trade_finance_Upgrade/vm.cfg'] => Error: (1, 'Internal error', 'xc_dom_do_gunzip: inflate failed (rc=-5)\n')
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
-----------------

Thanks Markus
I rebooted the host system and now unable to start any vms in that.. this is the error messages that I see..
[root@sditovs0001 170_PUAT2]# xm create vm.cfg
Using config file "./vm.cfg".
Error: Device 51728 (vbd) could not be connected. /var/ovs/mount/413DC32013614CDCB5A4268266CF4DCF/running_pool/170_PUAT2/disk1.img does not exist.
[root@sditovs0001 170_PUAT2]# less /var/log/xen/xend.log
: '0', 'state': '1', 'backend': '/local/domain/0/backend/vif/4/0'} to /local/domain/4/device/vif/0.
[2010-08-02 18:08:22 5041] DEBUG (DevController:97) DevController: writing {'bridge': 'xenbr1', 'domain': '170_PUAT2', 'handle': '0', 'uuid': '3af6475
b-8b4e-f3ef-2c42-31060c6aed98', 'script': '/etc/xen/scripts/vif-bridge', 'mac': '00:16:3E:32:40:0D', 'frontend-id': '4', 'state': '1', 'online': '1', 'fronte
nd': '/local/domain/4/device/vif/0', 'type': 'netfront'} to /local/domain/0/backend/vif/4/0.
[2010-08-02 18:08:22 5041] INFO (image:391) spawning device models: /usr/lib/xen/bin/qemu-dm ['/usr/lib/xen/bin/qemu-dm', '-d', '4', '-domain-name', '170_Pro
file_UAT2', '-videoram', '4', '-vnc', '0.0.0.0:0,password', '-vncunused', '-serial', 'pty', '-M', 'xenpv']
[2010-08-02 18:08:22 5041] INFO (image:440) device model pid: 4368
[2010-08-02 18:08:22 5041] INFO (image:528) waiting for sentinel_fifo
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:3089) Storing VM details: {'on_xend_stop': 'ignore', 'shadow_memory': '0', 'uuid': '8307eecb-f75c-4615-a74a-
ad93749ed635', 'on_reboot': 'restart', 'start_time': '1280752702.23', 'on_poweroff': 'destroy', 'bootloader_args': '-q', 'on_xend_start': 'ignore', 'on_crash
': 'restart', 'xend/restart_count': '0', 'vcpus': '2', 'vcpu_avail': '3', 'bootloader': '/usr/bin/pygrub', 'image': "(linux (kernel ) (superpages 0) (videora
m 4) (device_model /usr/lib/xen/bin/qemu-dm) (notes (FEATURES 'writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|su
pervisor_mode_kernel') (VIRT_BASE 3221225472) (GUEST_VERSION 2.6) (PADDR_OFFSET 3221225472) (GUEST_OS linux) (HYPERCALL_PAGE 3225423872) (LOADER generic) (PA
E_MODE yes) (ENTRY 3225419776) (XEN_VERSION xen-3.0)))", 'name': '170_PUAT2'}
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1640) Storing domain details: {'console/ring-ref': '8481928', 'image/entry': '3225419776', 'console/port': '
2', 'store/ring-ref': '8481929', 'image/loader': 'generic', 'vm': '/vm/8307eecb-f75c-4615-a74a-ad93749ed635', 'control/platform-feature-multiprocessor-suspen
d': '1', 'image/guest-os': 'linux', 'cpu/1/availability': 'online', 'image/features/writable-descriptor-tables': '1', 'image/virt-base': '3221225472', 'memor
y/target': '2097152', 'image/guest-version': '2.6', 'image/features/supervisor-mode-kernel': '1', 'image/pae-mode': 'yes', 'console/limit': '1048576', 'image
/paddr-offset': '3221225472', 'image/hypercall-page': '3225423872', 'cpu/0/availability': 'online', 'image/features/pae-pgdir-above-4gb': '1', 'image/feature
s/writable-page-tables': '1', 'console/type': 'ioemu', 'image/features/auto-translated-physmap': '1', 'name': '170_PUAT2', 'domid': '4', 'image/xen-ve
rsion': 'xen-3.0', 'store/port': '1'}
[2010-08-02 18:08:22 5041] DEBUG (DevController:95) DevController: writing {'protocol': 'x86_32-abi', 'state': '1', 'backend-id': '0', 'backend': '/local/dom
ain/0/backend/console/4/0'} to /local/domain/4/device/console/0.
[2010-08-02 18:08:22 5041] DEBUG (DevController:97) DevController: writing {'domain': '170_PUAT2', 'frontend': '/local/domain/4/device/console/0', 'uu
id': '4ef7c394-6479-c91f-f50c-b9aeaf0c1f58', 'frontend-id': '4', 'state': '1', 'location': '2', 'online': '1', 'protocol': 'vt100'} to /local/domain/0/backen
d/console/4/0.
[2010-08-02 18:08:22 5041] DEBUG (DevController:139) Waiting for devices vif.
[2010-08-02 18:08:22 5041] DEBUG (DevController:144) Waiting for 0.
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
[2010-08-02 18:08:22 5041] DEBUG (DevController:629) hotplugStatusCallback /local/domain/0/backend/vif/4/0/hotplug-status.
[2010-08-02 18:08:22 5041] DEBUG (DevController:629) hotplugStatusCallback /local/domain/0/backend/vif/4/0/hotplug-status.
[2010-08-02 18:08:22 5041] DEBUG (DevController:643) hotplugStatusCallback 1.
[2010-08-02 18:08:22 5041] DEBUG (DevController:139) Waiting for devices vscsi.
[2010-08-02 18:08:22 5041] DEBUG (DevController:139) Waiting for devices vbd.
[2010-08-02 18:08:22 5041] DEBUG (DevController:144) Waiting for 51712.
[2010-08-02 18:08:22 5041] DEBUG (DevController:629) hotplugStatusCallback /local/domain/0/backend/vbd/4/51712/hotplug-status.
[2010-08-02 18:08:22 5041] DEBUG (DevController:629) hotplugStatusCallback /local/domain/0/backend/vbd/4/51712/hotplug-status.
[2010-08-02 18:08:22 5041] DEBUG (DevController:643) hotplugStatusCallback 1.
[2010-08-02 18:08:22 5041] DEBUG (DevController:144) Waiting for 51728.
[2010-08-02 18:08:22 5041] DEBUG (DevController:629) hotplugStatusCallback /local/domain/0/backend/vbd/4/51728/hotplug-status.
[2010-08-02 18:08:22 5041] DEBUG (DevController:643) hotplugStatusCallback 2.
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=4
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2230) Destroying device model
[2010-08-02 18:08:22 5041] INFO (image:553) 170_PUAT2 device model terminated
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2237) Releasing devices
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing vif/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing vbd/51712
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/51712
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing vbd/51728
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/51728
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing vkbd/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vkbd, device = vkbd/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing vfb/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = vfb, device = vfb/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2250) Removing console/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:1144) XendDomainInfo.destroyDevice: deviceClass = console, device = console/0
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2235) No device model
[2010-08-02 18:08:22 5041] DEBUG (XendDomainInfo:2237) Releasing devices
-------------------

Multiplex Error - While Burning Disc Image

I've been trying to burn an hour and a half dvd using idvd '08 on professional quality, coming from and AIC HDV project in final cut express 3.5. It takes around 5 hours to encode and then for the third time it's given me a multiplexer error at the end. Is there anyway to solve this?
Thanks,
Mike

Do you have 20GB+ free on your start-up drive? Do you have any external HDs attached?
Your MacBook Pro hasn't frozen up while encoding?
There is 10.5.2 available today.

Error while attaching security to ProxyService

Hi Gurus,
1.created custom token and attached to proxy service and wrote xpath to get the assertion ID .
2.added policy to Business service in Request Policies section,
3.Proxy service has 4 operations and input body is same for all the operations
4.create relaible part in oSB's weblogic server and assertion party on actuall service's weblogic server.
5.while creating proxy service,selected "Selection Algorithm " to "SOAP Body Type",getting the following error:
[OSB Kernel:398034]Two or more operations expect the same incoming message, you must use a selector different than message body
because payload body structure is same for all the operations.
selection of "Selection Algorithm " to "WS-Addressing", will not work for custom policies
if I select "Selection Algorithm " to "SOAP Header", and Xpath to "*" or "." is is throwing input data is not macthed to any of the exposed service operations.
pleases throw some light on this.
PS:same configuration(Selection Algorithm " to "SOAP Body Type) is working when my service's each operations has its own body structure
Edited by: DasariN on Dec 9, 2010 2:33 AM

You cant select operation selection to be soap;body if all operations has the same body payload. Instead you can select the operation selection algo either to be
soap:header - In this case you have to define a custom tag in the header and populate it with an operation specific value.
soap:action: Define soap:action for the operations in the wsdl binding section. Client needs to populate this.
If you can't change your clients to set the header, you can front this proxy with an 'Any SOAP Service', which inspects the payload and then sets the header before making a route to this proxy

Error while attaching in safari

Guys !!
I am having the following error msg while i try to attach files from anything ... like gmail, yahoo or depositpics or for tht any attachment ! the error msg is as follows. please guide me on wat to do. and ... mozilla is working fine with attaching things .. no probs wat so ever ! i was actually trying to upload a pic whn the error occured ... and it happens with anytype of file as well !!!
"Safari can’t open the page “http://depositpics.com/index.php”. The error was: “POSIX error: Invalid argument” (NSPOSIXErrorDomain:22) Please choose Report Bugs to Apple from the Safari menu, note the error number, and describe what you did before you saw this message."

Hi
That error usually indicates a corrupted Cache file. If you are using OS X Tiger, go to the Finder: Your User Account>Library>Caches and move the Safari folder to the trash, then restart Safari. If using Leopard, same Caches folder, however, you'll need to move to the trash the com.apple.Safari file.
Then, restart Safari and try an attachment.

DOBJ.UPDATE_FAILED error while attaching adapters to Users Data Object

PROBLEM DESCRITPION:-
The following error occured while trying to attach entity adapters to Users Data Object (com.thortech.xl.dataobj.tcUSR) in Post-Update section.
Error Message: The security level for this data item indicates that it cannot be updated.
Update failed.
Update failed.
Error Keyword: DOBJ.UPDATE_FAILED
Description: Update failed.
Action: E
Severity: C
Kindly suggest to fix this issue.

Resolved the DOBJ.UPDATE_FAILED problem - I modified the dvt_data_level to 0 for dvt_post_update_sequence selective entries.
Able to attach the custom event handlers to Users Data Object - No more DOBJ.INVALID_UPDATE error!

Error while iserting a image in DB!!!!!

Hello guys,
I want to insert an image in the DB(MySql). I receive a compiling error when i try to insert an image.
I tried to find in the forums.. but i could not find it..
here is my code..
public void insertImage(String name, String path){
          try{
     ImageIcon icon = new ImageIcon(path);
     Image image = icon.getImage();
        BufferedImage bImage = new BufferedImage(image.getWidth(null),image.getHeight(null),BufferedImage.TYPE_INT_RGB);
        Graphics bg = bImage.getGraphics();
        bg.drawImage(image,0,0,null);
        bg.dispose();
        ByteArrayOutputStream out = new ByteArrayOutputStream();
        ImageIO.write(bImage,"jpeg",out);
        byte[] buf = out.toByteArray();
        ByteArrayInputStream inStream = new ByteArrayInputStream(buf);
          try {
          String query = "insert into instimage(Name, Image) values ('"+name+"',?)";
          PreparedStatement ps = conn.prepareStatement(query);
          ps.setBinaryStream(1,inStream,inStream.available());
          int count = ps.executeUpdate(query);
          }catch (SQLException e) {
               e.printStackTrace();
          }     catch (Exception e) {
               e.printStackTrace();
     The error is
com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: You have an error in your SQL syntax;
check the manual that corresponds to your MySQL server version for the right syntax to use near '?)' at line 1I would be grateful, if u guys help me out!!
Thanks
Edited by: frenchiee on Aug 27, 2008 8:16 AM

Your query looks like valid. But only if the name variable has good value. If name has value "name with apostrophe'", your code will fail. Try
String query = "insert into instimage(Name, Image) values (?,?)";
PreparedStatement ps = conn.prepareStatement(query);
ps.setString(1,name);
ps.setBinaryStream(2,inStream,inStream.available());

Error while attaching A.W. in A.W.M. 10g

Hello, my database is 10g 10.1.0.4.2 an I'm using Analytic Workspace Manager 10.1.0.4.
I've created an analytic workspace, and I've worked with it (creating some dimensions and cubes, working ok) for several days. But, suddenly, when I connect and I try to attach the A.W., I can't access it and an error message like this appears:
Error executing statement: ORA-00600: código de error interno, argumentos: [xsariget: c <= m], [66585592], [8388602], [], [], [], [], []
ORA-06512: en "SYS.DBMS_AW", línea 28
ORA-06512: en "SYS.DBMS_AW", línea 116
I've tried to attach it using DML commands from Olap Worksheet, and also using DBMS_AW package, but the effect is the same, always appears the same error. If I try to delete, it says that another user is connected to my A.W. (and there is not another user connected). We've restarted database, and the same error.
What is failing ? Can I recover the A.W. ?
Thanks a lot by your help.

Thanks a lot by your help, I can kill sessions in this way, and then I can attach the A.W.
But I keep on having an A.W. that seems to be corrupt, and I can't open it. It has no session associated (consulting the view), and therefore I can't kill it. What is failling with this ? Can I recover it ?
The error that appears in A.W.M. when I try to attach it is this (the effect is the same that trying to open it with DML in Olap Worksheet or with DBMS_AW package):
Unable to attach ISTAC_AW.AW_POBLACION_2001 Analytic Workspace read write
java.sql.SQLException: ORA-00600: código de error interno, argumentos: [xsariget: c <= m], [66585592], [8388602], [], [], [], [], []
ORA-06512: en "SYS.DBMS_AW", línea 28
ORA-06512: en línea 1
at oracle.olap.awm.connection.AwAttachmentManager.attachInThread(AwAttachmentManager.java:240)
at oracle.olap.awm.navigator.node.WorkspaceNode.setExpanded(WorkspaceNode.java:274)
at oracle.bali.ewt.dTree.DTreeButtonDecoration.processMouseEvent(Unknown Source)
at oracle.bali.ewt.dTree.DTreeStackingDecoration.processMouseEvent(Unknown Source)
at oracle.bali.ewt.dTree.DTree.processMouseEvent(Unknown Source)
at oracle.olap.awm.navigator.Navigator.processMouseEvent(Navigator.java:509)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at oracle.bali.ewt.LWComponent.processEventImpl(Unknown Source)
at oracle.bali.ewt.dTree.DTree.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

Error while attaching a image in forms10g envion..

Similar Messages

Maybe you are looking for