ERROR while booting

could any one be of assistance i cant boot my blackberry z3 it gives me this error www.bberror.com/bb10-0015

Hi and Welcome to the Community!
You need to do exactly what that page instructs...click through to the KB article and do what it instructs (reload your device OS).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Error while booting maverick

    error while booting maverick

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • Getting BSOD error while booting

    Hi,
    I am getting BSOD error while booting using bootable pendrive.
    Could you guys please provide the possible solution
    Regards,
    Chandan

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Pcipsy error while booting

    I have installed a PCI audio card and its driver. While booting
    I am getting following error
    pcipsy: WARNING: pcipsy0: ino 23 is invalid
    pcipsy: WARNING: pcipsy0: ino 10 is invalid
    Can any one tell me what is causing this pci error?
    Thanks

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • BSOD Error while booting Thinkpad L440

    Link to image
    Hi All, 
    I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system. 
    Please help.
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • USB error while booting

    I'm getting this error while booting:
    Waiting for UDev uevents to be processed
    [ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
    [ 3.631811] usb 1-1.1: can't read configurations, error -32
    [ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
    I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
    Last edited by quiro91 (2012-06-26 09:17:08)

    rc.conf -> http://pastebin.com/eJTXVt1L
    mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
    udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
    EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
    DSpider wrote:
    Post these files (preferably using pastebin.com):
    /etc/rc.conf
    /etc/mkinitcpio.conf
    "udev" should be after "base". For example:
    HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
    Then regenerate your initramfs:
    # mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
    For the kernel from the [core] repo, it's:
    # mkinitcpio -p linux
    Speaking of kernels, does it happen with linux-lts too?
    Last edited by quiro91 (2012-06-26 15:52:15)

  • Installing Arch Linux on USB key: error while booting

    Hello,
    first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
    So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
    Waiting 10 seconds for device /dev/sdc/
    Root device '/dev/sdc' doesn't exist. Attempting to create it.
    ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    /bin/sh: Can't contact tty; job control turned off
    [ramfs /]#
    To summarize I'll show you my conf files that could help you to resolve my problem:
    /etc/fstab.conf
    /dev/sdc1 /boot ext2 defaults 0 1
    /dev/sdc2 / ext3 defaults 0 1
    /dev/sdc3 /home ext3 defaults 0 1
    So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
    I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
    /etc/mkinitcpio.conf
    HOOKS="base udev usb autodetect pata scsi sata filesystems"
    I've added to here, "usb" to the hooks
    installed GRUB on my sdc, here is the menu.ist:
    # (0) Arch Linux
    title Arch Linux (USB)
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sdc ro vga=773
    initrd /kernel26.img
    So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
    I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
    I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

    1. What I did is re-installing entirely from my installation disk or USB to test out different setting in  my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
    2. Yes, same error.
    3. Tested out by-id/by-path and uuid = no difference
    4. Didn't know about larch, it seems to be a nice tool, I'll check it out

  • [SOLVED]LUKS error while booting

    This is more of an annoyance than a real problem; however it would be nice to know what is causing this. I have an unencrypted root (/dev/sda3) and two encrypted partitions. While booting I get the following message:
    ERROR:Failed to open encryption mapping: The device /dev/sda3 is not a LUKS volume and the crypto= parameter was not specified.
    However despite this the root is mounted correctly and the boot process follows normally. My two encrypted volumes also mount correctly. I checked my /etc/fstab and /boot/grub/grub.cfg and didn't see anything that might be giving it the idea that my root partition is encrypted. Am I missing something?
    Thanks,
    musashi.
    Last edited by musashi (2012-06-13 15:19:59)

    you probably have "encrypt" in your HOOKS array in /etc/mkinitcpio.conf .
    remove it and rebuilt your initramfs with "mkinitcpio -p linux"

  • Help error while booting sunfire v440 (error)

    Hi solaris admins.
    i am getting the following error while trying to install the solaris 10 OS on a sunfire v440 server.Please can someone help me out here.i think the problem is with the Hard Drives or something.
    =================================================
    Sun Fire V440, No Keyboard
    Copyright 2005 Sun Microsystems, Inc. All rights reserved.
    OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
    Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
    Rebooting with command: boot cdrom
    Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
    SunOS Release 5.10 Version Generic_118833-33 64-bit
    Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    =======================================================
    Hardware watchdog enabled
    Configuring devices.
    WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
    Corrupt label; wrong magic number
    WARNING: /pci@1f,700000/scsi@2/sd@2,0 (sd4):
    Corrupt label; wrong magic number
    ========================================================
    internal error: Bad file number
    svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: ex
    it status 134
    ====================================================
    Plese and advice and ideas are highly appreciated.
    We Brain server.
    Regards
    Noa Junior Sys Admin

    No clue why it's doing that when you're booting off
    the CD though... I didn't think it checked. Hmmm.
    boot cdrom will try and start the installer - not sure what happens if no valid disk label.
    I do recall going through this (or something similar)
    when the HD in my Blade 150 failed and I swapped in a
    new one. I just formatted the drive, then I was
    fine. Not sure HOW I formatted it though. Never
    bothered to write it down, it seemed obvious at the
    time :-(Could first try boot cdrom -s to just get a single user shell, and then run format just to create the disk labels.
    If manually running format successfully labels the disks, then try running the installer (which should give the option of how to partition the disks).

  • [SOLVED] Error while booting, related to nilfs2

    I've just installed my fresh Arch and used nilfs2 inside vlm2 as my home partition. While booting, I'm getting these errors:
    fsck: fsck.nilfs2: not found
    fsck: error 2 while executing fsck.nilfs2 for /dev/mapper/TheVG-HomeLV
    Other logical volumes are getting "clean" output while checked so it's not vlm-related; they are all ext4.
    Partition is mounted and seems to work but I'm scared of just ignoring it and creating my user. ;-)
    I have nilfs-utils installed. Is there any hook or module I need to add somewhere in order to use nilfs2 properly (like reiserfs hook)? There is nothing in the Wiki about this file system...
    Edit: well, it appears that nilfs doesn't not come with check utility so I'm marking this as solved; sorry for garbage post...
    Last edited by smsware (2013-03-16 22:07:55)

    As there is no fsck utility and as it actually is planned to be created (I read that it's needed because the fs can easily crash on power loss; still, it can be recreated, as you stated)  - there is a warning while building the kernel. I deleted fsck hook to not see it as my /var and root are sub-volumes of btrfs partition which doesn't need fsck as well. I made a service to umount, fsck and mount back the /boot (ext4) and uefi partitions... just to let you know what you can expect. But it's great anyway, snapshots are really easy to mount and use. I thought it has no wiki page because it's not popular (and probably for a reason) but now I believe it's because there is nothing to write about... it just works. ;-)
    Last edited by smsware (2013-05-29 15:58:26)

  • Error while booting Tuxedo

    OS:HP-UX
    Tux8.1 (32-bit)
    I am getting below error while trying to boot the tuxedo app.
    FATAL: conflicting options: CMDTUX_CAT:762: ERROR: LAN mode not specified for multiple node application
    few other facts:
    MODEL param is SHM
    The TUXDIR, TUXCONFIG & other Env variables are set properly. I cleaned up all IPC resources but still no luck.
    The same configuration was working before. Its when a day before we brought it down started giving trouble.
    Pls advise.

    Hi,
    Can you post the entire *RESOURCES section of your ubbconfig file?
    Also since this was working and has stopped, I'd verify that in fact there are no remaining processes hanging around. Ideally I'd reboot the machine to see if that clears it up.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Error while booting the server

    I am getting error while starting weblogic saying system or admin
    user not having enough permisssion.
    Error Below shown
    during initialization. Exception:java.lang.SecurityException: User admin is not
    permitted to boot the server
    java.lang.SecurityException: User admin is not permitted to boot the server
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:1076)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    >

    Make sure that you have fileRealm.properties in place and it is not screwed.
    "Sanjay Parihar" <[email protected]> wrote:
    >
    I am getting error while starting weblogic saying system or admin
    user not having enough permisssion.
    Error Below shown
    during initialization. Exception:java.lang.SecurityException: User admin
    is not
    permitted to boot the server
    java.lang.SecurityException: User admin is not permitted to boot the
    server
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:1076)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    >

  • Tux 9.1: TMS_ORA giving "Assume Started" error while booting.

    Hi,
    We are migrating our application running on Tuxedo 8.1(32-bit)(Corba C++ servers with Oracle 10g database) to Tuxedo 9.1(32-bit).
    OS: Suse Linux 9
    Installation of Tux 9.1 was done successfully.
    But while booting the servers, it is giving CMDTUX_CAT:819 "Assume Started(Pipe)" error.
    TMS server build was successful using this command:
    buildtms -v -r Oracle_XA -o TMS_ORA
    RM file in tuxedo has the following content:
    Oracle_XA:-L$(ORACLE_HOME/lib) -lclntsh
    ULOG trace:
    TMS_ORA.28529.1095670240.0: 12-04-2009: Tuxedo Version 9.1, 32-bit
    TMS_ORA.28529.1095670240.0: LIBTUX_CAT:262: INFO: Standard main starting
    restartsrv.28506.1079032704.-2: server ORA_GRP/30002: CMDTUX_CAT:1423: ERROR: Pipe error, assume failed.
    Core file is getting generated:
    Core file trace:
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "i586-suse-linux"...
    Using host libthread_db library "/lib/tls/libthread_db.so.1".
    warning: Can't read pathname for load map: Input/output error.
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libtux.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libtux.so
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libbuft.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libbuft.so
    Reading symbols from /data1/oracle/product/10.2.0/db_2/lib/libclntsh.so.10.1...done.
    Loaded symbols for /data1/oracle/product/10.2.0/db_2/lib/libclntsh.so.10.1
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libfml.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libfml.so
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libfml32.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libfml32.so
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libengine.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libengine.so
    Reading symbols from /lib/libdl.so.2...done.
    Loaded symbols for /lib/libdl.so.2
    Reading symbols from /lib/tls/libpthread.so.0...done.
    Loaded symbols for /lib/tls/libpthread.so.0
    Reading symbols from /lib/tls/libc.so.6...done.
    Loaded symbols for /lib/tls/libc.so.6
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libutrace.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libutrace.so
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libgiconv.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libgiconv.so
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libusort.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/libusort.so
    Reading symbols from /data1/oracle/product/10.2.0/db_2/lib/libnnz10.so...done.
    Loaded symbols for /data1/oracle/product/10.2.0/db_2/lib/libnnz10.so
    Reading symbols from /lib/tls/libm.so.6...done.
    Loaded symbols for /lib/tls/libm.so.6
    Reading symbols from /lib/libnsl.so.1...done.
    Loaded symbols for /lib/libnsl.so.1
    Reading symbols from /lib/ld-linux.so.2...done.
    Loaded symbols for /lib/ld-linux.so.2
    Reading symbols from /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/registry.so...done.
    Loaded symbols for /data1/tuxedo/tuxedo91/bea/tuxedo9.1/lib/registry.so
    Core was generated by `TMS_ORA -C dom=SWADOM2 -g 4 -i 30002 -u ORION -U /home/swadom2/server/log/ULOG'.
    Program terminated with signal 11, Segmentation fault.
    #0 0x41094fc4 in pthread_mutex_lock () from /lib/tls/libpthread.so.0
    OpenInfo parameter in UbbConfig is mentioned below.
    OPENINFO="ORACLE_XA:Oracle_XA+SqlNet=ORION_BE_DB+Acc=P/test/test+SesTm=100+LogDir=.+MaxCur=5"
    ldd from TMS_ORA didn't help. All required libraries are there.
    As per the Tux 9.1 release notes we dont need any rolling patches for this OS version.
    As this is a very urgent delivery, could you please help us?
    Thanks in advance,
    Santosh

    Hi Santosh,
    Just a guess, but try changing your RM entry to:
    Oracle_XA:xaosw:-L$(ORACLE_HOME/lib) -lclntsh
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Satellite M40-256 - error while booting via CD

    Hello,
    a well-known friend owns Satellite M40-256 which has Windows problem (error while updating/handling by her children).
    She doesn't own an external Toshiba FDD or ODD. Also this portable has no built-in FDD. Buying one only for this issue? NO
    The boot priority has been changed to: CD-network-HDD.
    I've tried another non Toshiba branded ODD (in BIOS not mentioned/found)
    The original ODD works/boots in another pc (via adapter) very great.
    Ive tried several CD/DVDs to boot from (no error displayed): instant-Linux like knoppix, suse, other windows CDs, recovery CD, ... no success
    Every time the same result: the laptop has a black screen, the ODD speeds up and after about 3 to 5 seconds windows starts with the black-white progress bar.
    I also tried to press C to force booting from CD.
    Some time ago, I had only access to windows in secured mode. But after uninstalling some updates it ends in a licence problem. This issue can be only solved by booting windows-cd via cd.
    It has a Toshiba bios 1.00 (interesting, seems quite old).
    I've trying at the moment to boot via network. Does the Toshiba show some messages about succeeding/failing at boot via network or CD?
    Has setting the execution bit an influence on behaviour?
    Does anybody know a solution booting windows?
    Thanks in advance

    Thanks for help.
    I will look for an other ODD from Toshiba trying for boot.
    Does the toshiba bios show messages about booting via cd or network? Even choosing network ends in a faulty Windows boot.
    After choosing an item there's no message while booting
    As I mentioned: the most interesting issue is ODD works/boots well via adapter in a normal pc and also after windows has been started (secured mode). But no boot possible.
    I suspect meanwhile BIOS or Mainboard. But is there a chance for update in secured mode? (the only thing it starts is "secured with prompt"). Cats bites itself in tail.
    BIOS also was saved with default setup. Nothing changed.
    In event viewer I've found entry about probs with hard-drive and controller.
    Does a destructive data processing influence the toshiba bios

  • [SOLVED] nouveau error while booting arch

    Hi!!! I'm newbie to arch, here is an error I can't solve myself. I search in google for solutions but they didn't solved. Please help me to solve this. I dual booted arch linux with window 8.1. After installation, while booting for the first time, this error occurred.
    Here is the error I found.
    [0.063411] Ignoring BGRT: Invalid status 0 (expected 1)
    starting version 218
    Arch_Linux: clean, 70622/18677760 files, 1643393/74703025 blocks
    [ 15.759913] nouveau E[ PIBUST][0000:01:00.0] HUBO: 0xffffffff (0x1a
    [ 15.759952] nouveau E[ PIBUST][0000:01:00.0] GPCO: 0x00000001 (0x1a
    [ 15.823494] nouveau E[ PBUS][0000:01:00.0] MMIO: 0x00000000 FAULT a
    [ 15.824050] nouveau E[ DRM]Pointer to TMDS table invalid
    [ 15.824072] nouveau E[ DRM]Pointer to flat panel table invalid}
    Last edited by aaa234 (2015-02-04 04:18:42)

    aaa234 wrote:
    runical wrote:
    That is a different problem to be honest. I assume that you can login using your normal user? If you set up sudo you might be able to get into root by using
    sudo su
    and change the password like that.
    I'm sorry if this is a noob question. Where do I type sudo su because as soon as the OS is booted, the system asks localhost login and password. I haven't installed any desktop environment yet. I only set up a password under arch-chroot but I can't login with and without that password.
    I was assuming a normal installed environment with a normal user. Using "sudo su", you can abuse privileges granted by sudo to circumvent the password required by su. A well configured sudo should not allow this, but in this case it seemed likely that the system was not completely set up yet.
    problem has been solved with this https://bbs.archlinux.org/viewtopic.php?id=168879
    Then, if there are no more problems, please mark the thread as solved.

  • Error while booting or loading application server by runing psadmin.exe

    HOw to upgrade the database to 8.49 from 8.48
    also to update the patch to 8.49 need to be a customer id or licensed something like that...
    i am using a trial version .....please suggest
    ==============ERROR!================
    Boot attempt encountered errors!. Check the TUXEDO log for details.
    ==============ERROR!================
    *Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :Y*
    PSADMIN.1160 (0) [06/06/09 13:12:01](0) Begin boot attempt on domain orcl
    PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Checking process status every 120 second
    s
    PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Server started
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) PeopleTools Release 8.49 (WinX86) start
    ing
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Cache Directory being used: C:\PTv849\a
    ppserv\orcl\CACHE\PSAPPSRV_2\
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(200, 0, M): PS General SQ
    L Routines: Missing or invalid version of SQL library PSORA (200,0)
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(0, 0, M): Database Signon
    : Could not sign on to database ORCL with user PS.
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Server failed to start
    PSWATCHSRV.3440 (0) [06/06/09 13:12:16] Shutting down
    PSADMIN.1160 (0) [06/06/09 13:12:22](0) End boot attempt on domain orcl
    *Do you wish to see the error messages in the TUXLOG.060609 file? (y/n) [n] :y*
    131215.TALENT!PSAPPSRV.3728.2056.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    131215.TALENT!tmboot.3328.3968.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
    countered; initiating user error handler
    131219.TALENT!BBL.2872.944.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    131222.TALENT!PSADMIN.1160: End boot attempt on domain orcl

    hi Nicolas,
    thnks for ur reply.....
    this is the link please check uptil yet what i have done now
    peopleSoft HRMS and campus 9.0 db creation please help
    can u please give the link to get the Peopletools installation Guide.
    recentely i am using pdf named hwtools849_itora.pdf FOR Database creation
    is it possible to update database from 8.48 to 8.49 by using trail version....so need to of any licensed
    AS on this link "http://gasparotto.blogspot.com/2008/06/peoplesoft-server-on-windows-xp.html" there it is shown to use update path from ftp connection to get download..where i am not able to connect
    6. PeopleTools 8.49 patch 11 - only if you are licenced - *(downloaded from ftp://ftp.peoplesoft.com/outgoing/ptools/84911)* From the extracted package, under disk1, run setup.exe, and follow the exact process as the previous one.
    add to path i ave given :- C:\oracle\product\10.2.0\db_1\BIN
    even thought i have set environment path
    like
    ORACLE_BASE = C:\oracle\product\10.2.0,
    ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ,
    ORACLE_SID = orcl,
    BEA_HOME = C:\bea ,
    PS_HOME = C:\PTv849; (DIR WHERE INSTALLED PEOPLETOOL 8.49 + PEOPLESOFT HRMS & CAMPUS SOLUTION 9.0)
    as u said
    On Windows, into you appserver config file, you should give the path directory "Add to Path" to your ORACLE_HOME\bin folder, did you ?
    please can u tell the appserver file with full path + name...by which ii can find....
    thnks..
    Edited by: user11084225 on Jun 6, 2009 2:14 AM
    Edited by: user11084225 on Jun 6, 2009 2:15 AM

Maybe you are looking for

  • How can I use iTunes when my library is somewhere else?

    Sounds like a dumb question, I know. But here it goes. I just put my whole iTunes library on an external FW drive and symlinked to it in my music folder. I love having the extra space on my PowerBook, and I rarely listen to music on my PB when I'm aw

  • HP PSC 2510 on BEFW11S4: assigning / reserving an IP address

    I use an HP PSC 2510 printer / scanner copier on my home network, with a wired connection to my BEFW11S4 ver. 2 (firmware 1.45.10). About two months ago, I started experiencing intermittent connectivity problems (for which I asked assistance in a sep

  • What are the major differences b/w live copy blueprint and Language copy of CQ ?

    We are in process of creating a different Language Versions of a Website and trying to figure out the best/recommended approach. what are the major differences b/w live copy blueprint and Language copy of CQ ? which one is recommended in which ? any

  • Help with downloading pages

    My entire site is saved in my computer, but one page was deleted while editing. How can I redownload that page and put it back in the files that I have saved in my computer of the entire site? Thanx

  • What would happen if this runs?

    This is a 'real' code example that i found in this program. Could this cause connection pools to not be relased Connection con = null; stmt = con.createStatement(); int ret = stmt.executeUpdate(simple query); con.commit(); con.rollback(); con.commit(