Error while calling up RFC Message No. UPC202
Hi Experts,
Calling Thru Trans code : BPS0 in ECC6.
Getting This Error :
Error while calling up RFC message No. UPC202.
After i check in BW with Trans code : ST22
Following this error message:
Category Internal Kernal Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC.
More details Please find attached file.
Thanks & Regards,
Mohammed Kaleem.
Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS
Similar Messages
-
Hi GuRuS,
I am working on BI 7.0. When I open the BPS workbench using Transaction bps0 and select the planning area 4TPM9000, and click on either "Variables" tab or "Master Data" tab or when I click on "Adhoc Package", I get this error " You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated: Error while calling up RFC. "
FYI I have done RFC connections between my CRM 2007 system and BI 7.0 system using Tr.SM59 and checked the connections from both the ends and it is working fine. So, pls show me the way out.
Thanks in advance,
RaghuHi...
The roles SAP_ALL and SAP_NEW are assigned for the RFCUser.
Regards,
Raghu -
Finding an error while calling an RFC
Hi,
My requirement is as follows.
The internal table(ITAB) which i am using has a field X of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
While executing it i am getting the error 'Interface data error'.
please let me know why this error is getting populated.
Regards,
SumiHi,
I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
I am getting error while calling the RFC.
Regards,
Yamini.A -
JCOProxy error while calling a RFC
Hi,
When i tr to call a RFC "CBIF_GLM1_BATCH_READ", i get a fatal error.The error message is:
"JCOProxy error: Problem retrieving JCO.Function object."
When i checked if i was able to connect to any of the functions other than BAPI's i got the same error.
Is there something that i need to turn on in SAP?
I am using SAP xMII 11.5.3 SR03 and SAP 4.7 Enterprise.
Any help appreciated.
Thanks,
RamRam,
I tried loading this RFC, CBIF_GLM1_BATCH_READ, using my version of xMII 11.5.3 and it worked without a problem. Are you sure that this RFC was not modified in your system that causes it to not work properly? Also, when you tested the RFC in se37 did you try to run it without setting any parameters? What about using the Web DynPro interface to see if it generates the XML properly? Just a couple of things to look into, but I know it's not xMII. If you did modify the RFC you will have to restart the ServletExec service to clear the xMII JCO API cache. Hope this helps.
-Sam -
Error while calling an RFC from R/3 to XI
Hello,
I am calling an RFC to send data from R/3 to XI which uses an RFC destination of TCP/IP type. I am getting the following error:
"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException".
Kindly provide some inputs.
-kshitija.hi
i think error lies with ur authorization...
check the following thread .....
Re: com.sap.aii.af.ra.ms.api.DeliveryException
hope this helpful... -
Error while calling an RFC from R/3
Hi all,
I am new to webdynpro. I am calling a RFC from R/3/.the code is like this.
Zhr_Fm_Loan_Input input = new Zhr_Fm_Loan_Input();
wdContext.nodeZhr_Fm_Loan_Input().bind(input);
input.setUsrid(wdContext.currentContextElement().getEmpnoa());
try
wdContext.nodeZhr_Fm_Loan_Input().currentZhr_Fm_Loan_InputElement().modelObject().execute();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException("Exception "+e,true);
In the output i am getting an eror Exception com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException.
Can anybody explain the error.
Regards,
RajeshHi Rajesh
Kindly check ur BAPI once from Backend, i hope there is no other mandatory field required apart from Usrid.
I hope BAPI doesnot have any mandatory Structure in it. in case it has , u have to pass that also..
Try printing this context also ..wdContext.currentContextElement().getEmpnoa().. i hope it is not returning a null.
wdContext.nodeZfm_Input().nodeOutput().invalidate(); // Add this line after execute statement
Regards
Puneet -
Error message "Error while calling up RFC"
I got this error message with a testuser in our quality system when I want to call up a web interface to enter some plandata.
I think it's a problem with authorization; the authorization object 'S_RFC' is set in the role. Is there another authorization object that should be used?
THX so long, ClemensHi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS -
Catching Error while calling FM (RFC Enabled)
Hi all,
1. In a loop on RFCDES table
im calling a Function Module
passing different RFC Destinations.
2. In any of the loop pass, if any
error comes, there is a short dump.
3. How to avoid this short dump
and continue the loop till end
using try,catch etc ?
Regards,
Amit M.http://help.sap.com/saphelp_nw04/helpdata/en/13/90a594a1ab0841bbb731bdec1a7fd7/content.htm - check this link for handling exception when calling RFCs
call the function like below
data: list like UINFO occurs 0 with header line .
CALL FUNCTION 'TH_USER_LIST' destination <dest>
TABLES
list = list
exceptions
communication_failure = 1
system_failure = 2 .
if sy-subrc ne 0 .
handle error here
endif .
Regards
Raja -
Error while calling RFC adapter(FILE-XI-RFC scenario)
Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere -
Error while calling RFC when using BSP Web Interface
Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
JoergActually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded. -
Error while creating a support message in satellite system
Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issuehi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul -
Error while calling a method on Bean (EJB 3.0)
I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan -
Error while calling WebService inside ISchedulerTask.
Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
<service name="RFServiceWrapper">
<service-config>
<property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
VinodFollowing is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file. -
Getting error while calling this BAPI:Field MATNR has been transferred inco
Hi,
I have a rquirement to upload material master data into sap for Plant 1251.(For plant 1251 we need to upload both Basi veiw and Extended View).
I am getting the following error while calling this BAPI.Field MATNR has been transferred inconsistently or is blank
the errror is :Field MATNR has been transferred inconsistently or is blank.
I have written the below logic in the program to upload material master data into SAP.
Please help me out to resolve this issue.
Thanks in advance.
Program logic which i have wriiten in the program is
LOOP AT it_rpt.
CLEAR lwa_return.
v_tabix = sy-tabix.
IF ( it_rpt-werks EQ p_werks AND
it_rpt-matnr IS INITIAL ).
retrieve internal number
PERFORM get_internal_number USING lc_mtart
lc_mbrsh
CHANGING it_rpt-matnr.
ENDIF.
IF NOT it_rpt-matnr IS INITIAL.
PERFORM convert_field_input CHANGING it_rpt-matnr.
ENDIF.
Header data
CLEAR lwa_headdata.
lwa_headdata-material = it_rpt-matnr.
lwa_headdata-ind_sector = lc_mbrsh.
lwa_headdata-matl_type = lc_mtart.
lwa_headdata-basic_view = 'X'.
IF NOT it_rpt-vkorg IS INITIAL.
lwa_headdata-sales_view = 'X'.
ENDIF.
lwa_headdata-purchase_view = 'X'.
lwa_headdata-mrp_view = 'X'.
lwa_headdata-storage_view = 'X'.
lwa_headdata-forecast_view = 'X'.
lwa_headdata-work_sched_view = 'X'.
lwa_headdata-account_view = 'X'.
lwa_headdata-cost_view = 'X'.
*Client data
CLEAR: lwa_clientdata, lwa_clientdatax.
IF it_rpt-werks EQ c_1251.
lwa_clientdata-matl_group = it_rpt-matkl.
lwa_clientdata-old_mat_no = it_rpt-bismt.
lwa_clientdata-base_uom = it_rpt-meins.
lwa_clientdata-manu_mat = it_rpt-mfrpn.
lwa_clientdata-mfr_no = it_rpt-mfrnr.
ENDIF.
lwa_clientdata-division = it_rpt-spart.
lwa_clientdata-unit_of_wt = lc_gewei.
lwa_clientdata-trans_grp = lc_tragr.
IF it_rpt-werks EQ c_1251.
lwa_clientdatax-matl_group = 'X'.
lwa_clientdatax-old_mat_no = 'X'.
lwa_clientdatax-base_uom = 'X'.
lwa_clientdatax-manu_mat = 'X'.
lwa_clientdatax-mfr_no = 'X'.
ENDIF.
lwa_clientdatax-unit_of_wt = 'X'.
lwa_clientdatax-trans_grp = 'X'.
lwa_clientdatax-division = 'X'.
Material Description
IF it_rpt-werks EQ c_1251.
lt_matdesc-langu = sy-langu.
lt_matdesc-matl_desc = it_rpt-maktx.
APPEND lt_matdesc.
ENDIF.
*Plant data
CLEAR lwa_plantdata.
lwa_plantdata-plant = it_rpt-werks.
lwa_plantdata-availcheck = lc_mtvfp.
lwa_plantdata-mrp_type = lc_dismm.
lwa_plantdata-mrp_group = lc_disgr.
lwa_plantdata-auto_p_ord = 'X'.
lwa_plantdata-proc_type = 'F'.
IF it_rpt-werks EQ c_1251.
it_rpt-prctr = lc_prctr. "1252
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-prctr = lc_prctr1. "1262
ENDIF.
lwa_plantdata-profit_ctr = it_rpt-prctr.
lwa_plantdata-period_ind = lc_perkz.
lwa_plantdata-max_stock = it_rpt-stawn.
lwa_plantdata-countryori = it_rpt-herkl.
lwa_plantdata-sloc_exprc = it_rpt-lgfsb.
CLEAR lwa_plantdatax.
lwa_plantdatax-plant = it_rpt-werks.
lwa_plantdatax-availcheck = 'X'.
lwa_plantdatax-mrp_type = 'X'.
lwa_plantdatax-mrp_group = 'X'.
lwa_plantdatax-auto_p_ord = 'X'.
lwa_plantdatax-proc_type = 'X'.
lwa_plantdatax-profit_ctr = 'X'.
lwa_plantdata-period_ind = 'X'.
lwa_plantdatax-max_stock = 'X'.
lwa_plantdatax-countryori = 'X'.
lwa_plantdatax-sloc_exprc = 'X'.
*Valuation data
CLEAR lwa_valuationdata.
lwa_valuationdata-val_area = it_rpt-werks.
lwa_valuationdata-price_ctrl = lc_vprsv.
lwa_valuationdata-price_unit = lc_peinh.
lwa_valuationdata-val_class = it_rpt-bklas.
CLEAR lwa_valuationdatax.
lwa_valuationdatax-val_area = it_rpt-werks.
lwa_valuationdatax-price_ctrl = 'X'.
lwa_valuationdatax-price_unit = 'X'.
lwa_valuationdatax-val_class = 'X'.
*Storage location
CLEAR lwa_storagelocation.
lwa_storagelocation-plant = it_rpt-werks.
lwa_storagelocation-stge_loc = it_rpt-lgort.
CLEAR lwa_storagelocationx.
lwa_storagelocationx-plant = it_rpt-werks.
lwa_storagelocationx-stge_loc = it_rpt-lgort.
*Tax Classifications
IF it_rpt-werks EQ c_1251.
it_rpt-tatyp = lc_tatyp. "u2018MWSTu2019
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-tatyp = lc_tatyp1. "u2018UTXJu2019
ENDIF.
lt_taxclass-tax_type_1 = it_rpt-tatyp.
lt_taxclass-taxclass_1 = lc_taxkm.
lt_taxclass-tax_ind = lc_taxim.
APPEND lt_taxclass.
*Sales data
CLEAR: lwa_salesdata, lwa_salesdatax.
IF it_rpt-werks EQ c_1251.
it_rpt-vkorg = lc_vkorg.
ELSEIF it_rpt-werks EQ c_1261.
it_rpt-vkorg = lc_vkorg1.
ENDIF.
lwa_salesdata-sales_org = it_rpt-vkorg.
lwa_salesdata-distr_chan = lc_vtweg.
lwa_salesdata-cash_disc = lc_sktof.
lwa_salesdata-item_cat = lc_mtpos.
lwa_salesdatax-sales_org = it_rpt-vkorg.
lwa_salesdatax-distr_chan = lc_vtweg.
lwa_salesdatax-cash_disc = 'X'.
lwa_salesdatax-item_cat = 'X'.
*Forecast parameters
CLEAR: lwa_forecast, lwa_forecastx.
lwa_forecast-plant = it_rpt-werks.
lwa_forecast-fore_model = lc_prmod.
lwa_forecast-fore_pds = lc_anzpr.
lwa_forecast-hist_vals = lc_peran.
lwa_forecastx-plant = it_rpt-werks.
lwa_forecastx-fore_model = 'X'.
lwa_forecastx-fore_pds = 'X'.
lwa_forecastx-hist_vals = 'X'.
Purchasing long text
IF it_rpt-werks EQ c_1251.
IF it_rpt-tdline1 <> ' '.
lv_tdobject = 'MATERIAL'.
lv_tdid = 'BEST'.
lv_tdname = it_rpt-matnr.
PERFORM fill_longtext TABLES lt_longtext
USING lv_tdobject
lv_tdname
lv_tdid
sy-langu
it_rpt-tdline1.
ENDIF.
Basic long text
IF it_rpt-tdline2 <> ' '.
lv_tdobject = 'MATERIAL'.
lv_tdid = 'GRUN'.
lv_tdname = it_rpt-matnr.
PERFORM fill_longtext TABLES lt_longtext
USING lv_tdobject
lv_tdname
lv_tdid
sy-langu
it_rpt-tdline2.
ENDIF.
*Units of measure
CLEAR : lt_uom,lt_uomx.
lt_uom-alt_unit = it_rpt-meins.
lt_uom-alt_unit_iso = it_rpt-meins.
lt_uom-unit_of_wt = it_rpt-gewei.
APPEND lt_uom.
lt_uomx-alt_unit = it_rpt-meins.
lt_uomx-alt_unit_iso = it_rpt-meins.
lt_uomx-unit_of_wt = 'X'.
APPEND lt_uomx.
ENDIF.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = lwa_headdata
clientdata = lwa_clientdata
clientdatax = lwa_clientdatax
plantdata = lwa_plantdata
plantdatax = lwa_plantdatax
forecastparameters = lwa_forecast
forecastparametersx = lwa_forecastx
storagelocationdata = lwa_storagelocation
storagelocationdatax = lwa_storagelocationx
valuationdata = lwa_valuationdata
valuationdatax = lwa_valuationdatax
salesdata = lwa_salesdata
salesdatax = lwa_salesdatax
IMPORTING
return = lwa_return
TABLES
materialdescription = lt_matdesc
unitsofmeasure = lt_uom
unitsofmeasurex = lt_uomx
materiallongtext = lt_longtext
taxclassifications = lt_taxclass
returnmessages = it_messages.
Regards,
ReddyCan you check with below code .
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
INPUT = it_rpt-matnr
IMPORTING
OUTPUT = it_rpt-matnr
EXCEPTIONS
LENGTH_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Move it_rpt-matnr to lwa_headdata-material .
Regard's
Smruti -
Oracle JBDC error while calling the store procedure
HI All,
I am get one strange error while calling a store procedure which has two parameter in and out.
I am pass the correct XML file which reaches the RDB and then PI receives a exception error message saying:
oracle.rdb.jdbc.common.RdbException: Closed Resultset
where as no error log is availble in RBD for the same.
Can anybody tell me what can be the cause of the error.
Let me know if you requires more information on this.
-adiHi Kiran,
Thanks..
But I am not able to understand you. I am calling a store procedure not a table. and we not doing anything in the store procedure except return one constant value in Out parameter.
-Adi
Maybe you are looking for
-
Doubt in write statement at the time of using Unicode
Hi , here we are working in unicode ,we are facing one problem in write statement whenever we activate the code we are getting the problem like ,"Literals that take up more than one line not permitted", but this report is working good in 4.7 but whi
-
Can't use flash in new macbook
I have a new MacBook, downloaded Flash, said its loaded but doesn't show up in applications and swf files will not open.
-
I am running version 3.6.15
-
Codebase classes loading on their own?
I have been tracking down a performance issue. So I am tracing the classes loaded by my clients VM. I have a class defined like so public final class GraphicFactory implements IGraphicFactory, Serializable{ private static final long serialVersio
-
Column change overview screen of infotype 1001?
Hello, I run transaction pp01 and choose an object (whatever type, let say S-position). For a particular object, I choose Relationshpis infotype (IT 1001) and choose overview icon. I see some columns of a displayed table. I would like to replace Abb