Error while changing base unit of measurere

Dear
i hav prob. while changing base unit of measure system gives error massage is material used in BOM, ECM is activated in our system and that material is showing only when valid from date is not entered othervise that material is not shown in BOM.how to remove that material from so i can change base unit of measure.

HI
You can only change the BUM if there is no stock production order planned orders reservations, PO s etc are not in the system there should be no transaction of the material ,after ensuring all this, u can change unit of measure
For more info
check these threads
Base unit of measure cannot be changed
Re: BOM unit of measure
change base unit of measure
Regards
Anupam Sharma

Similar Messages

Error while running base line update

I am getting below error while running baseline update in endeca environment. please help me out to resolve this issue.
./baseline_update.sh
WARNING: /opt/endeca/PlatformServices/6.1.0/j2sdk/bin/java does not exist
WARNING: Using java in /usr/java/jdk1.6.0_25/bin/java
[11.29.12 13:15:00] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[11.29.12 13:15:02] INFO: Definition has not changed.
[11.29.12 13:15:02] INFO: Starting baseline update script.
[11.29.12 13:15:02] INFO: Acquired lock 'update_lock'.
[11.29.12 13:15:02] INFO: Downloading config files from Web Studio.
[11.29.12 13:15:02] INFO: [ITLHost] Starting shell utility 'emgr_update_get_ws_settings'.
[11.29.12 13:15:03] SEVERE: Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 13 of valid BeanShell script:
10| if (Forge.isDataReady()) {
11| if (ConfigManager.isWebStudioEnabled()) {
12| // get Web Studio config, merge with Dev Studio config
13| ConfigManager.downloadWsConfig();
14| ConfigManager.fetchMergedConfig();
15| } else {
16| ConfigManager.fetchDsConfig();
[11.29.12 13:15:03] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.

Welcome to forum, Please raise only one thread for same problem..
error while running base line update
-RMishra

Changing Base Unit Of Measure in Material Master

Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
Regards

Hi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Budget Exceeded error while changing in Account Assignment

Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JK

I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth

Error while changing modules

On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error while Changing Vendor

Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "

go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju

Change Base unit of measurment while creating BOM-CS01

Dear Experts,
Base UoM in material master is in Metric Tonne "MT",While Creating the BOM of the Material My Base qunatity is also in MT by default but I want to change Base Uom to in KiloLiter "KL".But system is not allowing to change.
In system there are many Transactions iof material in current period.
Please suggest as it is in production server.
Thanks,
GBS

Hi ,
We are Using User Exists,
If Production Order Header material's unit of entry is not same as base UOM then system will check conversion ratio maintained in material master-->additional data.
Convert quantity in UOE to quantity in Base UOM for Header material i.e.101 movement.
Calculate componenet quantity (261 movement) as per bom.
Calculate 95% of component quantity for lower tolerance limit
Calculate 105% of component quantity for upper tolerance limit
If component quantity entered against 261 movement is not within lower and upper tolerance then system will give error message and will restrict to post entry.
This for information part.But still my question is how can alt. Uom of Measurment can be used while creation of BOM instead of Base Uom at header level.
GBS

Error message during Base unit change in material master

Hi
I am getting error message " Independent requirements are already assigned to the
material" when doing change in base unit in material master.
But I do not find any independent requiement for the plant in t code MD04.
Can anybody help me to get a solution for this?
Thanks in advance
Pradipta Sahoo

Hi
Thaks for your reply.
I checked in MD63 and don't find any entry. That makes me suprprise why the error shows as an independent requirement entry exists.
Please reply if you can further help me in this matter to solve this.
Kind regards
Pradipta Sahoo

Changing Base Unit Of Measure (Material Master)

Hi
1. How to check this? (Any successful changes in material master only took place when there is no open document from SD, PP, MM & FI for that material. )
2. Base unit of measurement cannot be changed. The reason being material movement history is there in table - MSEG mainly which otherwise create inconsistency in reporting. -
Is this line applicable for current period or previous period in current year or previous period previous year???
3. There are no existing purchase requisitions, purchase orders, or scheduling agreements for the material. -
is this means open / pending purchase orders or the the PO's created in system with respect to material where the GR and IR is already done
4. You can change the base unit of measure if there is no stock of the material during current and previous period----
is this means the term " previous preiod" is previous period in the current finacial year   or its applicable for the previous preiod in previous financial year
5. Post the stock in the previous period to the current period - -
how can we do this???
Vijay

See this OSS note : especially the last sentence:
From OSS note 138767
Within the material master record maintenance, you want to change the base unit of measure (base unit). During the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master.
In particular, the following checks are performed:
The base unit must not be defined as an alternative unit of measure for the material
No International Article Number must be assigned to the base unit
No proportion/product units must be defined for the material
No configurable material must be assigned
The material must not be used as a configurable material
Stock must neither exist for the previous period nor for the current period
No physical inventory must be active
No reservations or dependent requirements must exist for which the deletion indicator is not set
No planned orders must exist
No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
No WM transfer requirements, no WM quants or no WM posting change notices must exist
The material must not be a bill of material
The material must not be contained in a bill of material
The material must not be used as a production resource/tool
The material must not be used in task lists
No standard cost estimate must exist for the current or future period
No production orders must exist
No planned independent requirements must exist
No run schedule headers must exist
If the base unit has dimensions, no serial number profile must be assigned
No sales and distribution documents must exist which have status Not processed or Partially processed.
Solution
If necessary, all reasons mentioned above must be eliminated by archiving the objects listed
1) SAP checks this for you. A new button will appear in MM02 and after you click this button to check the error log, you will see which documents exist.
2) I have not seen that an existing movement will restrict the change of a BUoM.
3) No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
       it is not caring about GR done or IR done. it telling you that the deletion indicator has to be active. As a deletion indicator can be reset easily, you probably have to archive the documents
4) the previous period is the period before the current period.
   today we have February, hence the previous period is January.
5) first make sure your current stock is higher than the stock of the previous period. if it is lower, then you have to create inventory in current period first e.g. with 202 movement with current date.
Then you issue the previous period stock with 201 movement and previous period date (make sure periods are open in OB52 and MMRV allows posting to previous period).
Finally you issue the left stock in the current period with 201 and current date.
Now previous period and current period stock is zero. After the change of the base unit you have to get the stock back into the system
Edited by: Jürgen L. on Feb 2, 2010 3:58 PM

Error while changing PO in SRM extended classic Version 5.0

Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
Srujank

Hello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima

Error while Changing IO group

HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
Avadhut

Hi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar

Error while changing the physical IP address of SOA related datasource

Hello Everyone!!!
I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
     at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
     at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
     at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
     at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
Any suggestion would be of great help.
Thks in advance!!!

Hey thks for the reply,
We were able to solve the problem by just restarting our database,
i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
[http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
The Exception that appears in the log file is as follows:
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
     at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
     at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
     at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

Error while changing Service order through BAPI_ALM_ORDER_MAINTAIN.

Hi Frens,
I am facing problem while changing a service order .
I am changing the HEADER ( Planner group & Basic Finish date )   through
BAPI_ALM_ORDER_MAINTAIN.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = 'HEADER'.
lt_methods-METHOD = 'CHANGE'.
lt_methods-OBJECTKEY = l_aufnr.
append Lt_methods.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = ' '.
lt_methods-METHOD = 'SAVE'.
append lt_methods.
lt_header-orderid = l_aufnr.
lt_header-PLANGROUP = 'GE'.    " Hard coding for testing
lt_header-FINISH_DATE = '20081114'.
append lt_header.
lt_headerup-orderid = L_AUFNR.
lt_headerup-PLANGROUP = 'X'.
lt_headerup-FINISH_DATE = 'X'.
append LT_headerup.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
    TABLES
      IT_METHODS   = LT_methods
      IT_HEADER    = LT_header
      IT_HEADER_UP = LT_headerup
      RETURN           = LT_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       wait = 'X'.
I am getting error No : IWO_BAPI2 ( 118 )" *Order 5001887 cannot be saved, since no operation is maintained."*

Hi Balu,
You can refer to the note 966289 which talks about this problem if a service order template is used.
Thanks
Abishek

Error while changing base unit of measurere

Similar Messages

Maybe you are looking for