Error while collecting Custom FlatFile related InfoCubes in CTS
Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks,
Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks,
Similar Messages
-
Error while updating to target type INFOCUBE
Hi,
After BI SP16 Upgrade, we noticed that data load to a cube with DTP (7X DS) with partioning active, it would error out saying, "Error while updating to target " " type INFOCUBE....we applied note '1148007' and did reactivation of related structures and objects but still same error....As soon as we deactivate partioning, data load would go thru easily and successfully but we want to have partioning "Active"......I was wondering if anybody ran into this issue and get it resolved...Any help or helpful hints would be appreciated...
Thanks..Hi,
take a look:
Error while updating to target ZXXX (type INFOCUBE)
Error while trying to make infoobject as data target
Regards
Andreas -
Error while running custom BI report in R12.1.1
Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
PraveenHi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred. -
Error while creating customer account sites from backend
I am creating Customer Account Sites using the TCA API from Toad.
I am getting the following error
The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
The Operating unit has been defined.
I am using the following code:
DECLARE
p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_cust_acct_site_id NUMBER;
BEGIN
p_cust_acct_site_rec.cust_account_id := 9462;
p_cust_acct_site_rec.party_site_id := 5473;
--p_cust_acct_site_rec.language := 'US';
p_cust_acct_site_rec.org_id := 126;
p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
hz_cust_account_site_v2pub.create_cust_acct_site(
'T',
p_cust_acct_site_rec,
x_cust_acct_site_id,
x_return_status,
x_msg_count,
x_msg_data);
dbms_output.put_line(SubStr('x_return_status =
'||x_return_status,1,255));
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
IF x_msg_count >1 THEN
FOR I IN 1..x_msg_count
LOOP
dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
FND_API.G_FALSE ), 1, 255));
END LOOP;
END IF;
END;
Thanks and Regards,
K tannaDuplicate post.
Error while creating customer account sites
Error while creating customer account sites -
Error while collecting the process chain in a transport request
Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
PallaviHi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas -
Error while accessing custom application
Hi,
I get below error while accessing custom application.
"Function not available to this responsibility.Change responsibilities or contact your System Administrator."
Thanks
Regards
GSM1)While compiling the custom forms through Form builder the forms compile successfully & opens also but doesn't close.All other form than custom form close completely.How was this form created? Did you use the TEMPLATE.fmb file to create this custom form?
Please obtain the FRD for details about the error.
Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications
Note: 445166.1 - How to create a FRD (Forms Runtime Diagnostic) Log in EBusiness Suite R12 using Forms 10g
2)While compiling the custom forms through command
"frmcmp_batch.sh module=/d02/oracle/abc/apps/apps_st/appl/au/12.0.0/forms/US/custom01.fmb userid=APPS/APPS output_file=/d02/oracle/abc/apps/apps_st/appl/cust/12.0.0/forms/US/custom01.fmx module_type=form compile_all=special
While opening the form it's give Error:You are not authorized to access this functionality.Please check Apache log files as well as the application.log file for any errors.
Thanks,
Hussein -
Error while activating transformation for a infocube.
hi experts,
This is Lalitha.I am new to BI7.
I am trying to load data from flatfile into infocube.I have loaded master data successfully.while creating datasource for transactional data i am getting warning :External length specification will be ignored.
Even then I was able to load data into PSA.Now i am trying to create transformation for the infocube, but I am getting a error :Conversion type missing
and Field /BIC/IO_PRC9 must be assigned to an InfoObject
I have mentioned the infoObjects for datasource in the fields tab.
Any suggestions will be appreciated.
Thanks in advance.
regards,
LalithaHi,
Some times we have to assign manually as system does not create automatically 1:1 rule in some cases which i don't know.
Click on = at transformation and you will get the window, Under assign objects you can assign required fields to target field. this will clear your second error.
For first error -
If conversion type is missed for Price object. - Did you create the Price KF with Fixed currency or 0currency. if it is 0currency, in source system you should have one extra field with the units for Price field. As per iam concerned, If it is fixed currency it should activate - delete that particular transformation and recreate it.
Thats what i used to do. i got the result.
Have a fun
Cheers,
Shrinu -
Error while connecting Customer with vendor in XK02.
Hi Gurus,
While entering customer in control view of vendor master record in Tcode XK02,
System prompts an error msg. as "Please enter an address number".
Please guide me to solve this.hi,
If you maintained your VMR (Vendor master data ) properly...then pls check the custormer related fied selection in the OB20....here in the general settings....pls check whether the address is mandatory or not...if yes, then make it optional and then try...
Do it for customer centrally...
Also check the trasaction code OMSX, for vendor, check for the define screen layouts for trasactional data....here in the general data...check whether the fiscal address is mandatory or not....
Hope it helps...
Regards
Priyanka.P -
Error while transporting custom datasource
Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
MaddyHI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul -
While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
error I am getting are
1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.The error is occuring because Oracle is trying to validate/set a DFF.
Check the DFF attached to the customer entity, address entity or site use entity.
Especially look at the value sets attached to the DFF.
Look at the value set definition and the default value for the field.
Hope this helps,
Sandeep Gandhi -
Error while saving custom form in SP 2010
Hi,
Iam Getting the below error, while trying to save a SharePoint list item using custom visual webpart. But the data is getting saved only error pop ups. Please help me
to solve this problemAs per the error, you may be using an SPWeb object which has been disposed already.
I am not sure how you are calling SPWeb object, i can only guess that you are using an Using statement within your code and could be disposing SPContext object, if so, try refactoring your code.
if would be better if you can put your code in this forum to suggest.
Anyways, you can refer here some of these links to get an idea.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/383931c6-3724-40ff-8ae8-7f26d6db1c92/trying-to-use-an-spweb-object-that-has-been-closed-or-disposed-and-is-no-longer-valid?forum=sharepointadminprevious
http://sharepoint.stackexchange.com/questions/32154/trying-to-use-an-spweb-object-that-has-been-closed-or-disposed-and-is-no-longer
http://sharepoint.stackexchange.com/questions/74843/error-trying-to-use-an-spweb-object-that-has-been-closed-or-disposed
http://msdn.microsoft.com/en-us/library/aa973248(v=office.12).aspx
see this blog and links refered -
http://blogs.technet.com/b/stefan_gossner/archive/2008/12/05/disposing-spweb-and-spsite-objects.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
XD01 assertion failed error while updating customer master data
Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards, -
Error while invoking custom API using Database Adapter
Hi,
I've a requirement where in I need to fetch the data returned by a recordtype of a custom API. I've implemented this by invoking the custom API using Database Adapter. I'm facing a problem while performing this.
The custom API holds the signature as:
PROCEDURE EMP_DET
Argument Name Type In/Out Default?
P_DEPTNO NUMBER IN
L_LINE_TBL TABLE OF RECORD OUT
I've a schema with which it needs to be validated. It looks like:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:po="http://www.mycompany.com/ns/sales" targetNamespace="http://www.mycompany.com/ns/sales" elementFormDefault="qualified">
<element name="EmployeeDetails">
<complexType>
<sequence>
<element name="EmpNo" type="integer"/> <element name="EName" type="string"/> <element name="Job" type="string"/> <element name="Mgr" type="integer"/> <element name="HireDate" type="date"/> <element name="Sal" type="decimal"/> <element name="Comm" type="decimal"/> </sequence>
</complexType>
</element>
</schema>
I did a transformation to the above stated Emp.xsd with the xsd created for my custom API by the BPEL process. I could create the process and deploy successfully, but while invoking I get the following error. (I'm using BPM 10.1.3.1 with JDev 10.1.3.1)
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>6502</code>
</part><part name="summary"><summary>file:/D:/OraBPEL/bpel/domains/default/tmp/.bpel_my_poc_1.0_16c5d0f7b937c780d27d8975726a15cb.tmp/emp_details.wsdl [ emp_details_ptt::emp_details(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'emp_details' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the SCOTT.BPEL_EMP_DETAILS.EMP_PKG$EMP_DET API. Cause: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
[Caused by: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>
Internal Exception: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at "SCOTT.BPEL_EMP_DETAILS", line 1
ORA-06512: at line 1
Error Code: 6502</detail>
</part></remoteFault>
Can someone let me know as to why I'm getting this error? Also lemme know if such an approach is valid to do, if not please suggest me alternate methods to do this.
Thanks in advance,
GayathriThe 'numeric or value error' is one we have seen many times. The problem has been identified and fixed. Refer to this thread for more information.
Issue with DB Adapter - ORABPEL-11811 -
Error while creating customer master data
dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
DebeshHi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM -
DAC error while assembling custom subject area as Assembly Persistence Err
Hi Gurus
I created a custom task using custom tables. And registered the same in infa and dac as well and then created a custom subject area and then tried assembling the same with a single custom fact got the following err. can anyone help me out of this..
Custom_Test_Item_test - - error!
MESSAGE:::Error while persisting sa steps.
EXCEPTION CLASS::: com.siebel.analytics.etl.execution.ExecutionPlanInitializationException
::: CAUSE :::
MESSAGE:::Error while inserting a record!
EXCEPTION CLASS::: com.siebel.etl.gui.core.RecordManipulationException
Any help will be much appreciatedHi Gurus
I created a custom task using custom tables. And registered the same in infa and dac as well and then created a custom subject area and then tried assembling the same with a single custom fact got the following err. can anyone help me out of this..
Custom_Test_Item_test - - error!
MESSAGE:::Error while persisting sa steps.
EXCEPTION CLASS::: com.siebel.analytics.etl.execution.ExecutionPlanInitializationException
::: CAUSE :::
MESSAGE:::Error while inserting a record!
EXCEPTION CLASS::: com.siebel.etl.gui.core.RecordManipulationException
Any help will be much appreciated
Maybe you are looking for
-
Battery - reduced life and heat issues
I have a Macbook and have noticed recently that the batter life is down to about 1.5 hours fully charged and the battery runs hot. The details are; Model Information: Serial Number: XXXXXXXXXXXXXXXX Manufacturer: DP Device name: ASMB013 Pack Lot Code
-
Mac application "Quits Unexpectedly"
Hi everyone! I made a simple splash screen in Director MX 2004 (PC). It has 2 buttons to launch two other application using buddy API. I am publishing the application as EXE and APP. The EXE version works fine, BUT, the APP (Mac) doesnt... Whenever
-
T400 - only integrated graphics?
There seems to be only integrated graphics for the T400 (Intel Graphics Media Accelerator 4500MHD with vPro)... Can a dedicated graphics card be added to it?
-
Can I transfer updates from my laptop to my desktop computer?
Due to the slow internet available in my area and the cost of Verizon service, can I transfer updates from my laptop to my desktop? I use the library forupdates as their speed is much faster and I can carry the laptop. Robert
-
Doubts in table control.
Hi All. I need to create ALV report with check box and add push buttons on appilcation toolbar like selectall, deselect. If press selectall all check box need to be checked, if I press deselect all check boxes need to deselected .how to do the logic,