Error while configuring initial configuration of ESR

Dear All
I am continuously facing problem while doing the post installation steps for Configuration of ESR in CE.
Here is the log trace attached. Please go through it and tell me the correct way.
I am using the TechEd07 DVD for the CE7.1 and downloaded ESR SP03 from SMP.
This is the error that I am getting when the execution reaches to 97%.
I am doing the initial configuration of the ESR and following the Installation Guide - SAP Netweaver Composition Environment 7.1 SP3 - Developer Edition
I am in the configuration wizard of the nwa and trying to configure 'Configuration of ESR in CE'.
I am getting one error, the log is below.
Can anyone tell me the way out and how can I insall CE7.1SP3 successfully on my system
The log is Error:
ClientServerException exception:Import failed: Internal error
during pvc call: Version management was unable to execute the
last action because a temporary internal lock has been set.
com.sap.aii.utilxi.misc.api.ResourceException: Import failed:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCa
use(PvcUtils.java:86)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:82)
at
com.sap.aii.ibrep.server.transport.impl.pvc.RepPvcTransport.pvc
Import(RepPvcTransport.java:94)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.pvcImport(TransportServiceImpl.java:789)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importZippedStream(TransportServiceImpl.java:868)
at
com.sap.aii.ib.server.transport.impl.service.TransportServiceIm
pl.importXiStream(TransportServiceImpl.java:672)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.executeM
ETHOD_ID_WRITE_VERSIONSET(CmsHmiMethods.java:513)
at
com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(
CmsHmiMethods.java:128)
at
com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(Hmi
sServiceImpl.java:167)
at
com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.ja
va:212)
at
com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImp
l.java:98)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationCont
ext.proceedFinal(RequestInvocationContext.java:43)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTr
ansition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource
.invoke(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transact
ion.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Stateles
sInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.jav
a:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Security
Check.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Exceptio
nTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationCon
text.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChai
nsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvoca
tionHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy2405_10002.process(Unknown Source)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:331)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmi
Server(HmisServletImpl.java:238)
at
com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(H
misInternalClient.java:70)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletI
mpl.java:532)
at
com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletI
mpl.java:670)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.runServlet(FilterChainImpl.java:163)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:82)
at
com.sap.engine.services.servlets_jsp.server.servlet.Authenticat
ionFilter.doFilter(AuthenticationFilter.java:124)
at
com.sap.engine.services.servlets_jsp.server.runtime.FilterChain
Impl.doFilter(FilterChainImpl.java:74)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.run
Servlet(HttpHandlerImpl.java:425)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.han
dleRequest(HttpHandlerImpl.java:289)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.start
Servlet(RequestAnalizer.java:376)
at
com.sap.engine.services.servlets_jsp.filters.ServletSelector.pr
ocess(ServletSelector.java:85)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.servlets_jsp.filters.ApplicationSelecto
r.process(ApplicationSelector.java:160)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.WebContainerInvoker.
process(WebContainerInvoker.java:67)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.ResponseLogWriter.pr
ocess(ResponseLogWriter.java:60)
at
com.sap.engine.services.httpserver.chain.HostFilter.process(Hos
tFilter.java:9)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.DefineHostFilter.pro
cess(DefineHostFilter.java:27)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.filters.MonitoringFilter.pro
cess(MonitoringFilter.java:29)
at
com.sap.engine.services.httpserver.chain.ServerFilter.process(S
erverFilter.java:12)
at
com.sap.engine.services.httpserver.chain.AbstractChain.process(
AbstractChain.java:71)
at
com.sap.engine.services.httpserver.server.Processor.chainedRequ
est(Processor.java:309)
at
com.sap.engine.services.httpserver.server.Processor$FCAProcesso
rThread.run(Processor.java:222)
at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.
java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThr
ead.java:152)
at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.
java:247)
Caused by:
com.sap.aii.ib.server.propagation.XIPropagationException:
Internal error during pvc call: Version management was unable
to execute the last action because a temporary internal lock
has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.create
FromException(XIPropagationException.java:67)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:239)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccesso
rImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMetho
dAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.aii.ib.server.pvcadapt.PvcTransactionControlProxy.invok
e(PvcTransactionControlProxy.java:79)
at $Proxy2571_10002.importXiContent(Unknown Source)
at
com.sap.aii.ib.server.propagation.Propagator.importXiContent(Pr
opagator.java:92)
at
com.sap.aii.ib.server.transport.impl.pvc.GenPvcTransport.genPvc
Import(GenPvcTransport.java:65)
... 69 more
Caused by: com.sap.aii.utilxi.misc.api.BaseException: Internal
error during pvc call: Version management was unable to execute
the last action because a temporary internal lock has been set.
at
com.sap.aii.ib.server.propagation.XIPropagationException.wrapRa
wException(XIPropagationException.java:150)
... 79 more
Caused by:
com.sap.aii.ib.server.pvcadapt.lockmgr.XiLockDeniedException:
Version management was unable to execute the last action
because a temporary internal lock has been set.
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.createLockDeniedException(TransactionalLockManager.java:187)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.TransactionalLockManager
.requestLock(TransactionalLockManager.java:86)
at
com.sap.aii.ib.server.pvcadapt.lockmgr.CentralLockManager.reque
stLock(CentralLockManager.java:113)
at
com.tssap.dtr.pvc.propagation.server.PropagatableBlobTransientC
lass.lockPropagatableBlob(PropagatableBlobTransientClass.java:1
10)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.getEx
clusiveLock(PropagatableProvider.java:644)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.setDa
ta(PropagatableProvider.java:574)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:780)
at
com.tssap.dtr.pvc.propagation.server.PropagatableProvider.impor
t_(PropagatableProvider.java:821)
at
com.tssap.dtr.pvc.objectpers.Propagator.import_(Propagator.java
:104)
at
com.sap.aii.ib.server.propagation.PropagatorImpl.importXiConten
t(PropagatorImpl.java:233)
... 77 more
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process
Thanks & regards

Dear Rathish
Thanks for the reply and forwarding the problem to the developemnt team.
As I mentioned that the execution of the ESR failed when it reaced to 97%.
The error was it was not able to find some ..xi.. component and if you go to the log you will find that (come to the end in the log i.e. mentioned above)
" Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@13a0af
Serialized exception:Internal error during pvc call: Version
management was unable to execute the last action because a
temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@9a81d3
Serialized exception:Version management was unable to execute
the last action because a temporary internal lock has been set.
[Ljava.lang.StackTraceElement;@1c161b3
Step: Importing XI content
Retry StepSkip StepCancel Process "
And also I am following one help from 'http://help.sap.com/saphelp_nwesrce/helpdata/en/46/b3a7d01b475a62e10000000a11466f/frameset.htm' and they say that you will have the 'zero admin template'.
But when I go to 'Configuration Management > Infrastructure > Java System Properties
In the template I can see 3 things and theya are:
1. instance_development
2. CE_Complete_Stack_development_full
ID43799
3. CE_Composition_Environment_development_full
and there is no zero admin template as given in the help that I getting from the above guide.
I think this is the issue (missing zero admin template)
I got this from the SMP but dont know when and how to deploy to CE.
Can you please help me in this.
Thanks & regards
Vivek

Similar Messages

Error while updating the configuration files (MOB20003)

hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul

Error while posting initial quantities using stocktaking template of DTW

Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode WarehouseCode Counted
ItemCode WarehouseCode Counted
CHA0002 1 500
CHA0076 1 4000
Any help is appreciated.
Regards,
Noor Hussain

Hi Gordon,
Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
Regards,
Noor Hussain

DTW error while posting initial quantities using stocktaking template

Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode     WarehouseCode     Counted
ItemCode     WarehouseCode     Counted
CHA0002     1     500
CHA0076     1     4000
Any help is appreciated.
Regards,
Noor Hussain

HI,
The error might be because of the cell format of warehouse code. Check if the warehouse code in the system is "1" or "01". If it is "01" u need to change the format of the cells to text or else just put the symbol ( ' ) before the warehouse codes. This might solve your problem.
Thanks and regards.
Pritesh.

Error while running OBIA configuration configApps.bat

I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...

The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.

Error while ipmorting dev configuration in NWDS

HI
 I am getting error as "No configurations on server or server error" while trying to import development configuratios in NWDS 2.0.7. I am using WAS 6.40 sp 9 . plz provide me some idea what to do.
 I thought may be its because my cms has not been configured for domain & track. I tried to confiogure domain and succeed. but while tring to add track I am getting error as"
Collection 'compartments' of configuration "dm_dev" is empty or missing (null). : compartments
 again while adding track in domain if I adds software components "SAPDEVINFF" from the list it's giving the following error "
DTR (URL http://<server-name>:50000/dtr) server exception: Repository "http://<server-name>:50000/dtr" failed to properly respond to request "PROPPATCH ws/dm/sap.com_SAPDEVINFF/dev/" [HTTP/1.1 500 Internal Server Error]
 actually I am tring to configue JDI on WAS but get stuck with these configurtion things since last 3/4 days.
thanks in advance
Ashutosh

Thanks Pascal,
First one I understood.
for the second one I tried from my friend's system who has NWDS 2.0.9, but it showed same as above problem. I guess this is because I have not defined track.
 I have followed the NWDI installation guide of version sp12 . I guess that should not be a problem. I could not find a guide for sp9.
 now I have to solve the problem of these errors that is shown while defining track.
 one thing i want to let you know that while I am tring to access the CBS url http://<server-name>:50000/webdynpro/dispatcher/sap.com/tc.CBS.WebUI/WebUI
 its giving error
An error has occurred:
"Failed to process the request."
Please contact your system administrator
even though I have configured CBS as per the installation guide.

FPM: Error while creating component Configuration

Hi,
I have installed ABAP trial version (NSP), but without loopback adapter. So, now for every WebDynpro application, I have my manually change link from "http://<mymachineName>:8000" to "http://localhost:8000".
I create an application on FPM component: FPM_OIF_COMPONENT, then an application configuration for this application.
I open this Appl. config. in se80 and press "Start configuration". Now I try to create new component configuration.
After maintaining description and transport information, I save it.
At this point, I get a dump:
"RFC Error while sending logon data"
CALL_FUNCTION_CONNECT_ERROR in CL_WDR_CFG_COMP_SHBROKER======CP.
The class: CL_WDR_CFG_COMP_SHBROKER method: INVALIDATE
has a call: call function 'WDR_INVALIDATE_CFG_PATTERN' starting new task l_cfg_task
exporting client = client pattern = l_instance_name .
where it dumps.
could you please to resolve what could be wrong? is there some system setting which I missed.
Regards,
Daman

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Error while saving the configuration

H,
I'm getting the following error while try to save the configuration in L3 switch.
Rou#wr
Building configuration...
% Warning: Saving this config to nvram may corrupt any network management or sec
urity files stored at the end of nvram.
Continue? [no]:
what could be the problem?

hi
The corrective measure here is to compress the config file in NVRAM..
you can do the same using service compress-config in the global config prompt.
once you are done with the command in the global mode do remember to save the config..
regds

Error while create/change configuration an application

Hi,
while doing the configuration application.
when i am trying to create/change configuration an application.
i am getting following error.
Error:
Service cannot be reached
What has happened?
URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
can anybody help me out.
thanks in advance,
Kiran.

Hi,
please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
grtz,
Koen

Error while trying to configure Resource Object in Design Console

Hi,
I am getting the following error while trying to update any value in Resource Object(checking/unchecking any checkbox)
Description: Allow Multiple option cannot be changed from true to false. : Allow Multiple option cannot be changed from true to false.
Any clue as to what is happening?

We are on OIM 11.1.1.3 BP 6

Error while doing BAM configuration in JDeveloper

Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shaily

hi Shaily
It looks like suggesting a different forum is not needed, because you already tried that ...
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
I hope you get some answers.
success
Jan Vervecken

Error while importing .tpz file into ESR..

Hi Gurus,
I am facing one problem.
I developed one interface in XI3.0 development server.
I imported the integration directory object into quality but when importing the ESR part it got imported successfully,.But was not visible in list.when I went to change list it , and tried to activate the SWCV it gives error.
In ID I had exported whole configuration scenario and in ESR I had exported Namespace.
But first time when I exported ESR part I had checked "inlcude deleted objects". but I again exported and tried importing the ESR namespace, this time without checking "included deleted objects"
Error I am getting while activating the SWCV:
Namespace cannot be deleted since the software component version still contains objects in namespace "http://Namespacename"
Delete the objects first Originality indicator for the software component version set later. Ensure that the software component version only contains one original repositor
How can I delete it when I can even see it?
please help.
Thanks

Hey guys, the issue got reolved.
I did "Reject change".
Actually , when I first imported the .tpz I could not see the namespace,and tried doing it again.
But when I did reject change the namespace came in the list.

Error : while Importing SAP Objects in ESR.

I am getting error, while importing SAP object in a scenario in ESR.
What can be the issue ? as we have configured all the beckend settings & sldcheck is also OK.
Also, we are using proxy scenarios are working fine on system.
The details are as below :
    at com.sap.aii.ib.server.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:88)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulTransactionAssociation.invoke(Interceptors_StatefulTransactionAssociation.java:43)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulSessionInstanceGetter.invoke(Interceptors_StatefulSessionInstanceGetter.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at $Proxy1366.openSAPSource(Unknown Source)

Hello,
Have you used the notes to import ESR content?
Refer to one of them according to your system version:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
Regards,
Caio Cagnani

Error while Delta initializing for COPA

Hi All,
I got error "SYSTEM_IMODE_TOO_LARGE" trough ST22
While delta initializing for COPA. this error come after I create Start Routine" on Cube, just for info the routine for convert row to column.
But if I remove the routine the Initializing is OK.
Can you please suggest a solution for this ?
regards,
here my routine:
data: wa_datapackage like DATA_PACKAGE occurs 0 with header line.
data: bulan(6) type c.
data: REV000 like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        NETSLS like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        COGS like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        GRSPFT like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        OPSICM like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        PFTALHO like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        PFTALC like DATA_PACKAGE-/BIC/ZCPCOPAVL,
        GRSICM like DATA_PACKAGE-/BIC/ZCPCOPAVL.
wa_datapackage[] = DATA_PACKAGE[].
refresh DATA_PACKAGE.
FREE DATA_PACKAGE.
loop at wa_datapackage.
    DATA_PACKAGE = wa_datapackage.
*AERLOS     Revenue SD
    DATA_PACKAGE-/BIC/ZCPCOPAIT = 'AERLOS'.
    DATA_PACKAGE-/BIC/ZCPCOPAVL = DATA_PACKAGE-G_AERLOS.
    Append DATA_PACKAGE.
*AVV120     Disc Prinsipal
    DATA_PACKAGE-/BIC/ZCPCOPAIT = 'AVV120'.
    DATA_PACKAGE-/BIC/ZCPCOPAVL = DATA_PACKAGE-G_AVV120.
    Append DATA_PACKAGE.
*AVV121     Disc TRS Regular
    DATA_PACKAGE-/BIC/ZCPCOPAIT = 'AVV121'.
    DATA_PACKAGE-/BIC/ZCPCOPAVL = DATA_PACKAGE-G_AVV121.
    Append DATA_PACKAGE.
*AVV122     Disc TRS Other
    DATA_PACKAGE-/BIC/ZCPCOPAIT = 'AVV122'.
    DATA_PACKAGE-/BIC/ZCPCOPAVL = DATA_PACKAGE-G_AVV122.
    Append DATA_PACKAGE.
*AVV123     Cash Discount
    DATA_PACKAGE-/BIC/ZCPCOPAIT = 'AVV123'.
    DATA_PACKAGE-/BIC/ZCPCOPAVL = DATA_PACKAGE-G_AVV123.
    Append DATA_PACKAGE.
endloop.

Hi All,
As info in my machine the package size is 20000,
Max line 100000, frequency 10 and max proc 3, I check this through SBIW-General Setting-Maintain Control.
Is this what u mean Roberto? (CMIIW)
And total record transfer from COPA is 312633.
Here there result of ST22,
Roll area...................... 2722448
Extended memory (EM)........... 582160704
Assigned memory (HEAP)......... 1999599904
Short area..................... 0
Paging area.................... 24576
Maximum address space.......... 4294967295
I agreed with u Mosser about that and my cube is OK with create all key figure that I need. But this cube can't support for another report.
Thanks
supriatna

Service Registry error while starting after configuring with DB2 database

Hi
I installed WLS 9.1 / ALSR 2.1 on RedHat Linux 4 EL.And DB2 8.2 FP12
It was started fine with the default HSQL database, after changing the database to DB2 and restarted the server, I am getting the following errors
Any one know about this ..please help me. Seems it was alredy posted on forums.bea.com but those threads are not accessioble now.Appriciate any quick response
error log - I also checked the account_list.xml file it looks fine.
JAVA Memory arguments: -Xms2048m -Xmx2048m -XX:MaxPermSize=128m
WLS Start Mode=Production
CLASSPATH=:/opt/bea/bea91/patch_weblogic910/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/Java5/jdk1.5.0_17/lib/tools.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic_sp.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic.jar:/opt/bea/bea91/weblogic91/server/lib/webservices.jar::/opt/bea/bea91/weblogic91/common/eval/pointbase/lib/pbclient51.jar:/opt/bea/bea91/weblogic91/server/lib/xqrl.jar::/opt/bea/bea91/weblogic91/integration/lib/util.jar:
PATH=/opt/bea/bea91/weblogic91/server/bin:/opt/bea/Java5/jdk1.5.0_17/jre/bin:/opt/bea/Java5/jdk1.5.0_17/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/weblogic/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Starting WLS with line:
/opt/bea/Java5/jdk1.5.0_17/bin/java -server -Xms2048m -Xmx2048m -XX:MaxPermSize=128m -da -Dplatform.home=/opt/bea/bea91/weblogic91 -Dwls.home=/opt/bea/bea91/weblogic91/server -Dwli.home=/opt/bea/bea91/weblogic91/integration -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.auth.login.config=/opt/bea/bea91/alsr21/conf/jaas.config -Dweblogic.ext.dirs=/opt/bea/bea91/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.Name=zsoaLAALSRAdminServer -Djava.security.policy=/opt/bea/bea91/weblogic91/server/lib/weblogic.policy weblogic.Server
<Dec 23, 2008 11:02:49 AM PST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc2.jar:/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc_license_cu2.jar>
<Dec 23, 2008 11:02:49 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0_17-b04 from Sun Microsystems Inc.>
<Dec 23, 2008 11:02:50 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<Dec 23, 2008 11:02:53 AM PST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /opt/bea/bea91/license.bea>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2008 11:02:53 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/logs/zsoaLAALSRAdminServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2008 11:02:53 AM PST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that libmuxer library is in :'/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386/server:/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386:/opt/bea/Java5/jdk1.5.0_17/jre/../lib/i386:/opt/bea/bea91/patch_weblogic910/profiles/default/native:/opt/bea/bea91/weblogic91/server/native/linux/x86_64:/opt/bea/bea91/weblogic91/server/native/linux/x86_64/oci920_8'
>
<Dec 23, 2008 11:02:54 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
INFO: com.systinet.wasp.WaspImpl - Starting Systinet Server for Java/6.0 (Java/1.5.0_17; Linux/2.6.9-78.0.1.ELsmp; build SSJ-6.0-20060622-1136)
INFO: com.systinet.wasp.monitoring.LogEventModule - Starting event management
INFO: log4j.Log4JAdapter - Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_logEvents.log
INFO: log4j.Log4JAdapter - Error Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_errorEvents.log
INFO: com.idoox.config.xml.ConfigStore - Starting configStore with savingPeriod 2000
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/bsc/web/6.0][bsc][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/web/6.0][UDDI-web][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.idoox.wasp.security.server.SecurityModule - SecurityModule starts.
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
[Fatal Error] account_list.xml:1:1: Premature end of file.
<Dec 23, 2008 11:03:04 AM PST> <Error> <HTTP> <BEA-101216> <Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.systinet.uddi.security.destination.DestinationSecurityModule.load(DestinationSecurityModule.java:25)
at com.idoox.wasp.ModuleRepository.loadModule(ModuleRepository.java:120)
org.xml.sax.SAXParseException: Premature end of file.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at com.idoox.config.xml.XMLConfigurator.prepareConfigFile(XMLConfigurator.java:575)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:420)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:333)
Truncated. see log file for complete stacktrace
>
<Dec 23, 2008 11:03:04 AM PST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'registry'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "zsoaLAALSRAdminServer" for domain "zsoaLALASRDomain" running in Production Mode>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Exception in thread "Timer-3" java.lang.NoClassDefFoundError: com/systinet/wasp/webservice/FinalizationSupport
at com.systinet.wasp.ServiceManagerImpl$ReferenceQueueCleaner.run(ServiceManagerImpl.java:2617)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)

I discovered, that the problem is probably caused by a collection, which is returned by a findBy method.
see detail of exception:
Caused by: javax.xml.bind.JAXBException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions
java.util.Collection is an interface, and JAXB can't handle interfaces.
this problem is related to the following location:
at java.util.Collection
When I deploy an simple WS (summerizing 2 numbers) it is deployed fine and the WS is up and running.
Does anyone has experienced a similar problem? I want to expose the functionality of my BO methods in order to set up a small POC.
Can anyone please help?
Thanks & Regards,
Michael
null

Error while configuring initial configuration of ESR

Similar Messages

Maybe you are looking for