Error While connecting for ABAP Proxy

Hi All,
i am getting the connection error while creating the proxy connection from PI server to R3 System . I have checked the SLD configuration but did not find any wrong parameters there.
I am getting the below error.
"Error while reading ID of own business system from the SLD for system UDX and client 200", Also the software component of PI box is not getting reflected in SPROXY transaction of R3 system

Hi,
Do you see RFC created for /rep of desired PI system?This could be potential issue in your case:
Please check this:
In order to connect to an ESR, you have to maintain the RFC destination "SAP_PROXY_ESR". This RFC destination will then be used by proxy generation / Transaction SPROXY. It has to be set up using transaction SM59 and should look like this:
RFC Destination: SAP_PROXY_ESR
Connection Type: G (HTTP Connection to External Serv)
Description1: ESR for Proxy Generation
Target Host: esr_host
Service No: 1080
Path Prefix: /rep
Logon and Security:
Basic Authentication: active
User: esr_user
Password: esr_password
Regards,
Ashutosh

Similar Messages

Error while connecting for Java to SAP

Hi All,
I am encountering the following error while connecting from Java to SAP through JCO:
RFC_ERROR_LOGON_FAILURE: You are not authorized to logon to the target system
I have checked the connection string and everything appears to be fine.
Please let me know what the problem is.
Regards,
Rupesh.

Hi rupesh,
See this thread:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
Regards, Suresh KB

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Error while executing sender ABAP proxy program in ECC

Hi,
We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at etc etc
Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
Let me know if you need more info.
Regards,
N@v!n

Hi Naveen,
We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
And could you please tel me what is the main diff between in these two.
As we are are using PI 7.31 java stack so for this version what we have to use.
Thanks,
Shivdeep Kumar

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

Prerequisites to configuration for ABAP Proxy -???

My scenario is file->XI->R/3(abap server proxy).
Xi and R/3 are 2 seperate business systems
-Abap server proxy created on R/3 business system. R/3 client 550
-Xi client 400.
-SLD is common for both XI and R/3
My question is in reference to the below message thread:
1.I understand all the below configuartaion has to be done on R/3 business system, tell me am I correct
2. are these configuartion needed for client proxy as well as server proxy also?
HTTP_RESP_STATUS_CODE_NOT_OK
The prerequisites to configuration for ABAP Proxy include: (landscape dependent)
1. The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
2. You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
3. The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
Configuration required on the Business System:
1. Create HTTP connection in the business system.
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
2. Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
1.Select the relevant category under Specific Configuration Data.
2.Choose Change Specific Configuration Data.
For ABAP Proxies, Add the following configuration:
1.Category RUNTIME
2.Parameters: IS_URL
3.Current Value: dest://SAPISU_XID
Configuration of the Integration Engine
3. Connection between Business System and System Landscape Directory
1. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
1.RFC Destination: LCRSAPRFC
2.Connection Type: T
3.Description: <your description>
4.Choose ENTER.
5.Choose the Technical settings tab page and do the following:
6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
RFC Destination
2. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
Program ID: LCRSAPRFC
Gateway Host: <Integration Server host>
Gateway Service: <Integration Server gateway service>
Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
3. Maintain SLD access details in Transaction SLDAPICUST
1. You can reuse this program ID for all Business systems
2. If there is HTTP error during connection, first run transaction SLDCHECK in the Business system. Also check that HTTP connection is working fine.
3. In XI Adapter use HTTP connection rather then giving R/3 input details as this is easier to transport and maintenance
4. One receiver adapter can be used for all Interfaces connecting to a Business system.
Thanks for your reply in adavnce.
KK

2. are these configuartion needed for client proxy as well as server proxy also?
>>>>
the configuration is one time thing and your R3 will act as a server or client according to the data being sent or received.
In R3 a point to be noted is that in SXMB_ADM -> Intg. Engine Confg. -> Role of Business System sud be as a Application System.
Ref: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Message was edited by: Shabarish Vijayakumar

Error while connecting to workflow builder after installation...first time!

Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
Sumir

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

Installing Java Dialog Instance - Error while connecting to DB

We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad Dridi

Hi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat

JCONTROL - dies with Error while connecting to DB

Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
 at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
 at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
 ... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PR

ISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
 at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
 at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
 at java.sql.DriverManager.getConnection(DriverManager.java:559)
 at java.sql.DriverManager.getConnection(DriverManager.java:189)
 at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR

Error while connecting to db

Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.

IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM

Deserialization Error while connecting to web service

I am getting a deserialization error while connecting to a web service.
Deserializing parameter 'ScheduleReceiveService': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType...
There are two methods ex
UserDefinedClass1 methodA(java.lang.Object ) and
UserDefinedClass2 methodB(UserDefinedClass3)
And when i generate java files using WSDL2Java using apache axis the UserDefinedClass is generated as follows.
public class UserDefinedClassA implements java.io.Serializable {
private java.lang.Object _return;
// There are other methods for setting the attributes,hashCode,equals etc
Now when i try to invoke the method from the client i get this as an error ?
Deserializing parameter 'UserDefinedClass': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType
Appreciate any suggestion.

Hi Manohara,
To download the file from SharePoint, I recommend to use the credential for a user who can access the file in SharePoint in the client object model.
NetworkCredential credentials = new NetworkCredential(“username”, “pwd”, “domain”);
ClientContext context = new ClientContext(“http://thesitecollection”);
context.Credentials = credentials;
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I am getting error while connecting to sqlplus by using apps account in 11i

i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

yes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao

Error while connecting MYSQL Database

Hi,
I use a 30 days trial of Crystal Reports 2008. When i try to connect with the database i always get the next error: [http://www.visiscan.nl/error.jpg]
The database is 4.1GB large and there is 10GB free space on the database.
Anybody can tell me what to do?

Hi Tom,
As I understand the error while connecting to database is
u201CFailed to retrieve data from databaseu201D
There could be some could be multiple reasons for this.
If you are using an ODBC connection then try to check the DSN. Recreate the same and then try.
If the database is oracle check if native client is installed and try to ping from the native client to check if it responds.
When connecting to Oracle, ensure that the Service name is identical to that used in the <ORA_HOME>/network/admin/tnsnames.ora file on the BusinessObjects XI Release 2 server.
For ODBC databases, ensure that the ODBC DSN is exactly the same in the ODBC Manager as on the BusinessObjects XI Release 2 server.
Please let us know if this helps
Regards,
Aditya Joshi

Error while connecting to HTTPS WebService through Jdev

I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
 HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

Dear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
 Boot microcode : CN1000-MC-BOOT-2.00
 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
 IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0 : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H

Error While connecting for ABAP Proxy

Similar Messages

Maybe you are looking for