Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Similar Messages

Best practices of integration with SAP Netweaver

Hi All,
I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
Thanks in advance for your help.
Yura.

Hi Yura !!
As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
Regards,
Matias.

Best Practice to start with SAP NetWeaver BI (BW) to become a BI consultant

Hi there,
I have one Question. As consultant for SAP NetWeaver Portal (Development/Java), I would like to start with SAP NetWeaver BI (System Configuration, Customizing and Development with ABAP/ABAP OO) through e-learning and/or with (e)books.
A system for making practice is available.
Can someone give me a helpful guide how to start and become a BI Consultant for system administration and development within the next 12 months?
Some Questions I have noticed are:
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
3) How is a BI system to configure as default after installation?
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
Of course, these are only a few Question and far from complete. Details and other important points will be appreciated.
Many thanks,
Cengiz

Hi,
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
Document management from RSA1 transaction of BI helps to attach any unstructured documents at specific level in BI.
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
BI has got a separate tool and GUI to perform all the Extract, Transform and load related activities. ABAP is part of BI but you don't need much extensive ABAP learning. Basic ABAP is sufficient to write routines and extractors.
3) How is a BI system to configure as default after installation?
May be a BASIS person can help you out here about the configuration but this is not the job of BI person.
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
You can search for SAM Series learn ABAP in 24 days book. This book is sufficient to learn the ABAP required for working in BI.
But except ABAP you will have to completly learn the BI system to work efficiently.
Regards,
Durgesh.

Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

Hi all,
we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
so any idea why it started giving the error.
We have check out this forums but of no help.
[ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
The trace file dev_icm says
[Thr 52] Thu Jan 20 14:34:00 2011
[Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
[Thr 52]    session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
[Thr 52] No Secude Error present in trace stack!
[Thr 52]   SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
[Thr 52]   SSL NI-sock: local=192.168.127.70:65243 peer=80.78.2.187:443
[Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
[Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
[Thr 81] Thu Jan 20 14:34:15 2011
[Thr 81] IcmWorkerThread: end worker thread 53
[Thr 80] Thu Jan 20 14:44:45 2011
[Thr 80] IcmWorkerThread: end worker thread 52
Thanks,
Asem

Hareen,
We checked the the note 1318906 and followed the steps but error persists.
Could you please advice more on this.
Rahul,
The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
Br
Asem

Error while connecting to HTTPS WebService through Jdev

I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

Dear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0       : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0    : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H

Error while opening report in Infoview

I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
     at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(Unknown Source)
     at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
     at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
     at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
     at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
     at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
Ramesh

Hi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne

Deserialization Error while connecting to web service

I am getting a deserialization error while connecting to a web service.
Deserializing parameter 'ScheduleReceiveService': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType...
There are two methods ex
UserDefinedClass1 methodA(java.lang.Object ) and
UserDefinedClass2 methodB(UserDefinedClass3)
And when i generate java files using WSDL2Java using apache axis the UserDefinedClass is generated as follows.
public class UserDefinedClassA implements java.io.Serializable {
private java.lang.Object _return;
// There are other methods for setting the attributes,hashCode,equals etc
Now when i try to invoke the method from the client i get this as an error ?
Deserializing parameter 'UserDefinedClass': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType
Appreciate any suggestion.

Hi Manohara,
To download the file from SharePoint, I recommend to use the credential for a user who can access the file in SharePoint in the client object model.
NetworkCredential credentials = new NetworkCredential(“username”, “pwd”, “domain”);
ClientContext context = new ClientContext(“http://thesitecollection”);
context.Credentials = credentials;
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while connecting MYSQL Database

Hi,
I use a 30 days trial of Crystal Reports 2008. When i try to connect with the database i always get the next error: [http://www.visiscan.nl/error.jpg]
The database is 4.1GB large and there is 10GB free space on the database.
Anybody can tell me what to do?

Hi Tom,
As I understand the error while connecting to database is
u201CFailed to retrieve data from databaseu201D
There could be some could be multiple reasons for this.
If you are using an ODBC connection then try to check the DSN. Recreate the same and then try.
If the database is oracle check if native client is installed and try to ping from the native client to check if it responds.
When connecting to Oracle, ensure that the Service name is identical to that used in the <ORA_HOME>/network/admin/tnsnames.ora file on the BusinessObjects XI Release 2 server.
For ODBC databases, ensure that the ODBC DSN is exactly the same in the ODBC Manager as on the BusinessObjects XI Release 2 server.
Please let us know if this helps
Regards,
Aditya Joshi

Error while connecting to DB, when checking installation type of NW04S-Inst

Hi,
i installed a new netweaver 04s - system on sles10sp2 as distributed system.
SCS is ok, Database DB6 installation is also successfull.
Now i install the central instance, but when sapinst checks the installation type (i select nothing), the installation failed with:
Execution of the command "/usr/lib64/jvm/java/bin/java -classpath /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib/launcher.jar -showversion com.sap.engine.offline.OfflineToolStart com.sap.inst.jsourcecheck.JSourceCheck /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib/iaik_jce.jar:/mnt/sapcd/NW04S_SR2n/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/jsourcecheck.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib:/home_sap/db2i33/sqllib/java/db2jcc.jar:/home_sap/db2i33/sqllib/java/db2jcc_license_cu.jar -systemName I33 -ssPropFile /usr/sap/I33/SYS/global/security/data/SecStore.properties -ssKeyFile /usr/sap/I33/SYS/global/security/data/SecStore.key -trace all" finished with return code 101. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.path)
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.ibm.db2.jcc.b.SqlException: [ibm][db2][jcc][t4][2013][11249] Connection authorization failure occurred. Reason: User ID or Password invalid.
        at com.ibm.db2.jcc.c.b.i(b.java:2002)
        at com.ibm.db2.jcc.c.b.c(b.java:1657)
        at com.ibm.db2.jcc.c.bb.r(bb.java:792)
I see the reason, but i don't know which user is mean ?
Can anyone help me ?
Best Regards,
Tom

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

Error while connecting to DB's - java.lang.NullPointerException

I am getting this error while connecting to any db using SQL dev.
1. I was able to connect to all before something happaned (unrealted install/uninstalls)
2. I also have two errors in the "Logging Page- Log" window
I have seen this errors in other threads, but dont think thay have a resolution to this.
Let me know if any other info is required and I will append to this thread.
-MAIN ERROR-
java.lang.NullPointerException
     at oracle.dbtools.raptor.conntypes.RaptorClassLoader.findClassLoader(RaptorClassLoader.java:48)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnectionImpl(RaptorConnectionWrapper.java:213)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:171)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
     at java.lang.Thread.run(Thread.java:619)
-Two ERRORs in the log window-
1 ------------------
SEVERE     88     0     oracle.jdbc.driver.OracleDriver     Error while registering Oracle JDBC Diagnosability MBean.
2---------------
SEVERE     95     63     oracle.ideimpl.extension.AddinManagerImpl     Failed to create addin oracle.report.addin.ReportAddin
Thanks
-SJ

Interestingly when I go to Preferences/Database I get this error:
Internal Error when attempting to create this panel: - Do you think I should just reinstall the whole thing?
java.lang.NullPointerException
     at oracle.dbtools.raptor.config.AdvancedInfo.onEntry(AdvancedInfo.java:40)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:921)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:894)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:104)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1343)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1211)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1205)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:177)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1422)
     at java.awt.Component.setVisible(Component.java:1375)
     at java.awt.Window.setVisible(Window.java:806)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
     at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:202)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:795)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:580)
     at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
     at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:265)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:571)
     at oracle.ide.controller.IdeAction$2.run(IdeAction.java:804)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:823)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:521)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1220)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1261)
     at java.awt.Component.processMouseEvent(Component.java:6041)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
     at java.awt.Component.processEvent(Component.java:5806)
     at java.awt.Container.processEvent(Container.java:2058)
     at java.awt.Component.dispatchEventImpl(Component.java:4413)
     at java.awt.Container.dispatchEventImpl(Container.java:2116)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
     at java.awt.Container.dispatchEventImpl(Container.java:2102)
     at java.awt.Window.dispatchEventImpl(Window.java:2440)
     at java.awt.Component.dispatchEvent(Component.java:4243)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.

There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful.

Daemon error while connecting:/@ocproddc

Hi!,
I am using Oracle Clinical version 4.5.0. OC back end is installed on Windows 2000.
PSUB batch job has hung with “ENTERED” status. Log file is showing following error:
ERROR: Daemon error while connecting:/@ocproddc
ORA-12154: TNS: could not resolve service name
Please provide solution.
Thanks
Message was edited by:
user570602

Hi There,
Step1
First check in Services Manager to see that OracleTNSNames service is running. If it is running go to Step 2. In not start it and then restart PSUB service and try to run a job.
Step 2
Lets say you have installed OC in D drive.
Go to D:\oracle\ora92\network\admin\tnsnames.ora
Open tnsnames.ora in notepad and check to see whats the "Service Name".
Make sure that the Startup parameters you are giving when starting PSUB contains SID which = Service name
For example service name is ocproddb then:
Start PSUB as RXCPROD with parameters:
ocproddb 45 verbose D:\\opapps\\oc\\45
Let me know whether it helps.
Best regards
Edited by: user1841803 on Dec 28, 2008 11:00 PM

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Error while Connecting report Best Practices v1.31 with SAP

Similar Messages

Maybe you are looking for