Error while connecting to R/3 system
Hello All,
I am trying to connect BW and R/3 system .I have done all the necessary settings : RFC connections, Defined message types, generated partner profile.
Now I am trying to connect to R/3 system through RSA1. I picked up the right target host and have all the authorizations, but when I click 'USE' for the creation of source system, I get an error ' Error in source system'.
How can I find out the exact problem.
Regards,
NIKEKAB
Hi
See SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/content.htm
Connecting ECC6.0 and SAP BI
Setting-Up a Connection between BW and R/3 for Data Load
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152&overridelayout=true
Configuring RFC in BI7 for connecting ECC6 server:
Connecting ECC6.0 and SAP BI
Thanks
Reddy
Similar Messages
-
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Error while installing Mini SAP Basis system 4.6D test suite
Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.ais win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH -
Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
SumirThis issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini -
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat -
Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM -
Error while connecting for Java to SAP
Hi All,
I am encountering the following error while connecting from Java to SAP through JCO:
RFC_ERROR_LOGON_FAILURE: You are not authorized to logon to the target system
I have checked the connection string and everything appears to be fine.
Please let me know what the problem is.
Regards,
Rupesh.Hi rupesh,
See this thread:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
Regards, Suresh KB -
Error while connecting to DB, when checking installation type of NW04S-Inst
Hi,
i installed a new netweaver 04s - system on sles10sp2 as distributed system.
SCS is ok, Database DB6 installation is also successfull.
Now i install the central instance, but when sapinst checks the installation type (i select nothing), the installation failed with:
Execution of the command "/usr/lib64/jvm/java/bin/java -classpath /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib/launcher.jar -showversion com.sap.engine.offline.OfflineToolStart com.sap.inst.jsourcecheck.JSourceCheck /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib/iaik_jce.jar:/mnt/sapcd/NW04S_SR2n/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/jsourcecheck.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib:/home_sap/db2i33/sqllib/java/db2jcc.jar:/home_sap/db2i33/sqllib/java/db2jcc_license_cu.jar -systemName I33 -ssPropFile /usr/sap/I33/SYS/global/security/data/SecStore.properties -ssKeyFile /usr/sap/I33/SYS/global/security/data/SecStore.key -trace all" finished with return code 101. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
J9VM - 20071205_1933_LHdSMr
JIT - r7_level20071016_1845)
PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.path)
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.ibm.db2.jcc.b.SqlException: [ibm][db2][jcc][t4][2013][11249] Connection authorization failure occurred. Reason: User ID or Password invalid.
at com.ibm.db2.jcc.c.b.i(b.java:2002)
at com.ibm.db2.jcc.c.b.c(b.java:1657)
at com.ibm.db2.jcc.c.bb.r(bb.java:792)
I see the reason, but i don't know which user is mean ?
Can anyone help me ?
Best Regards,
TomThis issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini -
Error while connecting to HTTPS WebService through Jdev
I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetDear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0 : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H -
Error while connecting to SQL SERVER from OWB
HI All,
I got the following error while connecting to SQL SERVER from OWB(10gR2).
1). Created DSN with (GMSCADA)
2). tnsnames file is updated with the following information
GMSCADA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
(CONNECT_DATA =
(SERVICE_NAME = SA)
3). Tried to connect to SQL SERVER frm OWB
Username: sa
password: sa
host: 172.16.60.29
port: 1433
service name: GMSCADA
schema: sa
I got the following error, when I click Test Connection:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB_3095
Regards,
Kumar.Hi David,
What is Gateway, How I have to setup, Please let me know.
I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
Can u please let me know.
Regards,
Kumar. -
Getting the error while connection to SAP Server
Hi,
I am getting the below mentioned error while connection to SAP Sever using SAP.Net Connector. What could be the possible reason?
"<i>
<b>Connect to SAP gateway failed
Connect_PM GWHOST=ia2-ms.boi.hp.com, GWSERV=sapgw01, ASHOST=ia2-ms.boi.hp.com, SYSNR=01
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 15.78.80.31, service 3301)
TIME Fri Feb 02 11:10:35 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER</b>
</i>"Hi
The gateway monitor is used to analyze and administer the SAP Gateway from outside the SAP System. The profile you assign to it must be the same as for the gateway. This process has different names:
UNIX: gwmon
Windows: gwmon.exe
more on this.. please go thru ..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/9f13c24b9b11d189750000e8322d00/frameset.htm
hope this info helps!
with regards,
raj.
<i>pls, award points</i> -
Getting error while connecting Utility Customer E-Services
I am getting the following error while connecting to Utility Customer E-Services through the browser.
Error: Your user master has not been created correctly. Contact your system administrator.
Please advise some fix for this problem.
Thanks in advance.
Regards,
NitinHi Mattia,
yes, I had resolved this problem. It requires some configuration in ume database of the WebAS, where UCES application is hosted.
1) Create a user in ume.
2) Assign group "Everyone" and "Authenticated Users" to the user
3) Within Customized Information tab, create the mapping between your web user, reference user and business partner.
fscm_refuser: Use reference user id. ( user id to login to ISU system )
objtype_0: BUS1006
objkey_0: User business partner details ( business partner number in ISU)
If there is no customized Information tab, then open visual administrator and do the following.
1) Navigate to Services->Configuration Adapter
2) Click on Runtime tab -> Display configuration
3) Navigate to cluster_data -> server -> cfg -> services -> Propertysheet com.sap.security.core.ume.service
4) Add the following in ume.admin.addattrs.
com.sap.security.core.user.refuser:fscm_refuser;com.sap.security.core.user.references:objtype_0;com.sap.security.core.user.references:objkey_0;com.sap.security.core.user.references:objtype_1;com.sap.security.core.user.references:objkey_1;com.sap.security.core.user.references:objtype_2;com.sap.security.core.user.references:objkey_2;com.sap.security.core.user.references:objtype_3;com.sap.security.core.user.references:objkey_3;com.sap.security.core.user.references:objtype_4;com.sap.security.core.user.references:objkey_4;com.sap.security.core.user.references:objtype_5;com.sap.security.core.user.references:objkey_5;com.sap.security.core.user.references:objtype_6;com.sap.security.core.user.references:objkey_6;com.sap.security.core.user.references:objtype_7;com.sap.security.core.user.references:objkey_7;com.sap.security.core.user.references:objtype_8;com.sap.security.core.user.references:objkey_8;com.sap.security.core.user.references:objtype_9;com.sap.security.core.user.references:objkey_9;com.sap.security.core.useces:objtype_10;com.sap.security.core.user.references:objkey_10;com.sap.security.core.user.references:objtype_11;com.sap.security.core.user.references:objkey_11;com.sap.security.core.user.references:objtype_12;com.sap.security.core.user.references:objkey_12;com.sap.security.core.user.references:objtype_13;com.sap.security.core.user.references:objkey_13;com.sap.security.core.user.references:objtype_14;com.sap.security.core.user.references:objkey_14;com.sap.security.core.user.references:objtype_15;com.sap.security.core.user.references:objkey_15;com.sap.security.core.user.references:objtype_16;com.sap.security.core.user.references:objkey_16;com.sap.security.core.user.references:objtype_17;com.sap.security.core.user.references:objkey_17;com.sap.security.core.user.references:objtype_18;com.sap.security.core.user.references:objkey_18;com.sap.security.core.user.references:objtype_19;com.sap.security.core.user.references:objkey_19;
5) Save the changes, exit visual administrator and restart the server.
Now. your application will work perfectly fine. -
Error while reading PO in backend system Inform system adiministrator
Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj MalhotraHi
Have you tried out this ?
<b>There are two BADIs which might help you in achieving the job.</b>
<u><b>BBP_EXTLOCALPO_BADI</b> [Control Extended Classic Scenario ]
<b>and</b>
<b>BBP_GROUP_LOC_PO</b>
[Exit Grouping of Items for Local Purchase Orders]</u>
<u>Read the documenatation first, using transaction - SE18
before implementing them for your requirement.</u>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
JCONTROL - dies with Error while connecting to DB
Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PRISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:559)
at java.sql.DriverManager.getConnection(DriverManager.java:189)
at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR
Maybe you are looking for
-
Session time out when working in application level
Hi We are upgraded our PROD environment from 11.5.10.2 to R12.1.3 When end user working at application level then it is throughing the session time out error, end user is not idle state he active and working on application level I have checked the pr
-
Hi. I have read several discussions but still have not found a solution. I have iphone 5S, Ipad Mini and Mac. When using Mail, both iphone 5S and Ipad are synced. This means that when I read and delete one email in one device (ie iphone), the other o
-
Need help to install and launch adobe reader XI and accept the ender license agreement
I do not know where to select accept launch adobe reader ender license agreement on a macbook pro
-
i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?
-
Hi, I have a Solaris 11.1 T4 server. I created a 'flar' from a Solaris 10 (U7) server and created a Solaris 10 zone on the T4. zonecfg has the IP address configured (can't copy and paste) correctly. The global zone has net1:1 configured with the IP a