Error While connecting  to SAP R3 from crystal reports

Hi Experts,
I am trying to connect to a SAP R3 from crystal reports, it gives below mentioned error.
Logon failed.
Details: CMALLC: rc= 27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.11.12.13, GWSERV=SAPGW12, SYSNR= 12
Location SAP-gateway on host xyz/sapgw12
Error timeout during allocate
TIME Wed Nov 18..
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1872
Detail no connect of TP sapdb12 from host 10.11.12.13 after 20 sec
COUNTER 6
Please help me to solve this error.
Regards,
Ganesh

Hi
please ask your network admins if there is a firewall between your CR Designer installation and your SAP R/3 system.
I assume that you have imported the necessary trsansports in your SAP R/3 system.
Which kind of driver do you use for the connection to SAP R/3?
Regards,
Stratos

Similar Messages

  • Error while connecting to ECC tables from Crystal

    Hello,
    I am trying to create a crystal report on the SAP ECC tables directly, when I try to create a new connection from u201CSAP Table, Cluster, or Functionu201D option in crystal reports 2008 I get this error" Logon Failed. Details: you don't have necessary rights to design reports against the SAP system. please contact your administrator"
    Now my question is where are my rights missing, is it on BO side or SAP side, I see that I have access to SAP tables when I try to logon through the SAP logon pad it works, I could see the tables.
    Please let me know your thoughts.
    Thanks

    Hi,
    part of the ABAP Transports from the SAP Integration Kit are also specific authorization objects. Take a look at the Installation guide for the SAP Integration Kit in the appendix.
    Ingo

  • Error while connecting to SAP Server from Windows XP Client.

    Hi,
    I am facing the problem while i am trying to connect my Windows XP Clients( With Service Pack 3, DI-API Installed and Microsoft SQL Server Native Client Installed) to SAP server i got follwoing Error.
    Connection Failed :
    SQL State : '08001'
    SQL Server Error : 233
    [Microsoft][SQL Native Client]Named Pipe Provider Could not open the connection SQL Server [233].
    Connection Failed :
    SQL State : "HYT00"
    SQL Server Error : 0
    [Microsoft][SQL Native Client]Login Timeout Expired
    Connection Failed:
    SQL State :'08001'
    SQL Server Error : 233
    [Microsoft][SQL Native Client]An Error has occured while establishing new connection to the server.
    When connecting SQL Server 2005, this failure may caused by the fact that under the default setting SQL Server does not allow remote connection.
    Regards,
    Arpit Shah

    Hi Arpit,
    Solution of Error in starting B1 after installation should help here too.
    Kind regards
    Mario
    SAP Business One Forums team

  • Getting the error while connection to SAP Server

    Hi,
        I am getting the below mentioned error while connection to SAP Sever using SAP.Net Connector.   What could be the possible reason?
    "<i>
    <b>Connect to SAP gateway failed
    Connect_PM  GWHOST=ia2-ms.boi.hp.com, GWSERV=sapgw01, ASHOST=ia2-ms.boi.hp.com, SYSNR=01
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host 15.78.80.31, service 3301)
    TIME        Fri Feb 02 11:10:35 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r.cpp
    LINE        8716
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER</b>
    </i>"

    Hi
    The gateway monitor is used to analyze and administer the SAP Gateway from outside the SAP System.  The profile you assign to it must be the same as for the gateway. This process has different names:
    UNIX: gwmon
    Windows: gwmon.exe
    more on this.. please go thru  ..
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/9f13c24b9b11d189750000e8322d00/frameset.htm
    hope this info helps!
    with regards,
    raj.
    <i>pls, award points</i>

  • Error while connecting to SQL SERVER from OWB

    HI All,
    I got the following error while connecting to SQL SERVER from OWB(10gR2).
    1). Created DSN with (GMSCADA)
    2). tnsnames file is updated with the following information
    GMSCADA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
    (CONNECT_DATA =
    (SERVICE_NAME = SA)
    3). Tried to connect to SQL SERVER frm OWB
    Username: sa
    password: sa
    host: 172.16.60.29
    port: 1433
    service name: GMSCADA
    schema: sa
    I got the following error, when I click Test Connection:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from OWB_3095
    Regards,
    Kumar.

    Hi David,
    What is Gateway, How I have to setup, Please let me know.
    I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
    Can u please let me know.
    Regards,
    Kumar.

  • Error while connecting to the database from a JSP Page

    Hi,
    I am using a simple JSP page which is based on the sample JSP pages from OTN.
    When I try to connect to my database using the following code:
    InitialContext ic = new InitialContext();
    OracleDataSource ds = (OracleDataSource)ic.lookup("jdbc/OTN9iDS");
    m_connection = ds.getConnection();
    I get the following error:
    Naming exception Error while connecting to the database : javax.naming.NameNotFoundException: jdbc/OTN9iDS not found in JDBCTest-JDBCTestProject-webapp
    Does anybody know wht this is happening?
    Any help would be appreciated
    FRank

    Hi Frank,
    Are you using standalone OC4J or 9iAS ? If you are using standalone OC4J then you need to add a proper data source entry in %OC4J_HOME%j2ee\home\config\data-sources.xml file.
    If you are using 9iAS the you can log in to the Enterprise Manager console and add the data source entry by using wizard provided by 9iAS.
    Ensure the case of the JNDI lookup string, since, it is case sensitive.
    Hope this helps.
    Abhijeet

  • Host did not respond error in connecting the SAP Router from SERVICE PLACE

    Dear Sir,
    We renew the Router Certificate by October 2008.  We are using broadband connection in our office with firewall (ISA) .
    When we try to connect the sap router from SAP Service Market Place, It is connected and after some time, status is changing to Host did not respond due to timeout.
    We checked the SAP Router Tab File also. It is correct.  Guide us to solve this issue
    With Regards
    K.Natarajan

    Hi
    This type of error occurs maximum,only when there is no proper connection between the systems.So,my suggestion is to check with the connection between the systems with the help of Basis person.
    regards
    krishna

  • Unable to connect to defined CMS from Crystal reports Enetrprise

    Hi all,
    I am using SAP Crystal Reports for Enterprise XI 4.0 (SP2 Patch 6). We have 2 independent Intelligence & Processing Tiers installed with their own CMS services. However, temporarily we are using only 1 common WAS Netweaver 7.3 for both CMS (when we connect to CMC/BI Launch pad we juts type different CMS name). Both of them are on same patch level, etc.
    My problem is that when I try to connect to BO Enterprise (BI 4.0) from Crystal reports, I am unable to specify to which CMS it has to connect - since it take the Server name and not the CMS name. It automatically connects me to only 1 of the CMS while there is no chance to connect to another (it might have somewhere recorded the CMS name). is there a chance to choose between those 2 CMS to which Crystal should connect?
    Thanks!
    Erik.

    Erik,
    You should specify the name of the server where BOE is installed. You can use the FQDN or even the IP address and the port name.
    Regards,
    Julian

  • Error when exporting to other format from crystal report

    Hi,
    I have been facing an error "Method 'IRCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version = 11.0.3300.0, Culture-neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overriden." while trying to export the crystal report to another format (e.g. pdf and excel) from an application from a software vendor.
    For your information, the machine OS that is running the application is Window 7. Before I did the installation of the application, it already has Visual Studio 2005 and Crystal Report XI Release 1 installed in the Window  7 system. After I had the above error, I went to search more information on the website and found out that I need to upgrade to Crystal Report XI Release 2 from the search results. However, after I upgraded from Crystal Report XI Release 1 to Crystal Report XI Release 2 and apply service pack 6, I still faced the same error when I tried to export. I even tried to uninstall Visual Studio 2005 and Crystal Report XI Release 2 but I'm still facing the same above error while exporting. I also tried to reinstall the application from software vendor but the same error come out.
    Your help is highly appreciated. Thanks!!
    Regards,
    Jennifer

    Good morning Jennifer
    When you say:
    " I also tried to reinstall the application from software vendor but the same error come out."
    I wonder if the app you are trying to install is from a 3rd party vendor / developer? If it is, installing CR XI r2 (11.5) will not resolve the issue for you. From the error, the app was compiled with CR XI R1 (11.0) and the only way to get that app to use CR XI r2 will be to recompile it with CR XI r2 assemblies. E.g.; you will have to have access to the source code and then recompile the app, ensuring that you are referencing CR XI r2 assemblies. Or am I missing something here?
    Ludek

  • Connection to Embeded Database from Crystal Reports XI

    I am writing an application that uses a SQL Server Mobile Database.  I have not been able to determine how to connect to this database through Crystal Reports.
    1.  Is it possible?
    2.  How do I provide the connection string that uses only 2 parameters?
    Gene

    When you create a DSN the ODBC string expects information for Server, Database, Username, and Password.  When you are working with an Embedded Database, typically you have a filename and a password (which can be null).  I was not able to create a DSN for this connection.
    What I have been able to get working is the following:
    1.  Create an ADO DataSet Object within the application.
    2,  Create the CR attaching ot the DataSet Object.
    3.  In the application code where you are attaching the CR to a viewer you must
          a.  Define a Data Adaptor for the DataSet.
          b.  Define a Data Table and load the table from the DataSet GetData() method.
          c.  Define the full path to the report file.
          d.  Define a ReportDocument Object
          e.  Load the report path in the the ReportDocument Object
          f.  Define the DataTable as the Data Source to the ReportDocument Object
          g. Define the Viewer ReportSource as the ReportDocument Object.
    I have been able to use this approach on 3 separate reports and returned the correct data.  A lot of steps, but it is working.
    GFKerls

  • Error while connecting to Access Database from Oracle

    Dear All,
    I'm trying to connect Oracle 9i to Access Database.
    but im getting the below error while executing query.
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi did the following thing through to connect the database.
    1) First i made odbc driver called ODBC1
    2) I create the following file on oracle server C:\oracle\ora9I\hs\admin\initodbc1.ora
    i edit the below thing in initodbc1.ora
    HS_FDS_CONNECT_INFO =ODBC1
    HS_FDS_TRACE_LEVEL = ON3) I made some changes in sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= NONE
    before it was *NTS*4) Below are the entries in tnsnames.ora i changed the port from 1521 to 1522 cos 1521 already exists.
    ODBC1.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    ODBC1.WORLD =
      (DESCRIPTION =
         (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.251) (PORT = 1522)
      (CONNECT_DATA =
          (SID = ODBC1)
      (HS=OK)
    )5) Listener file code
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
         (SID_DESC =
          (PROGRAM = hsodbc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
      )6) after that i created
    SQL> CREATE DATABASE LINK MYSQL CONNECT TO XTRACK IDENTIFIED BY XTRACK USING 'ODBC1.WORLD'
    Database link created.7) Listener Status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 04-MAR-2012 21:26:16
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                04-MAR-2012 20:52:33
    Uptime                    0 days 0 hr. 33 min. 44 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyi did exactly what documentation says and it will not through any error but atlast when i try to access the access database tables it give me the below error
    SELECT * FROM DBO_COMPANY@MYSQL
    ERROR at line 1:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    NCRO: Failed to make RSLV connection
    ORA-02063: preceding 2 lines from MYSQLi'm using Oracle9i Enterprise Edition Release 9.2.0.1.0 any help will appreciate.
    Regards
    Moazam
    Edited by: Moazam Shareef on Mar 4, 2012 10:25 AM

    first of all thanks for your support Mr. Kgronau
    I did what u said but still its giving me below error.
    SQL> SELECT * FROM DBO_PATINS@MYSQL
      2  ;
    SELECT * FROM DBO_PATINS@MYSQL
    ERROR at line 1:
    ORA-12154: TNS:could not resolve service namei re-check the service, and restart the listener as you said below are the logs could you help me to solve this issue plz.
    TNSNAMES.ORA
    # TNSNAMES.ORA Network Configuration File: C:\oracle\ora9I\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = orcl)
    ODBC1 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ODBC1)
    INST1_HTTP.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = SHARED)
          (SERVICE_NAME = MODOSE)
          (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA.TADAWI.LOC =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
      )LISTENER.ORA
    # LISTENER.ORA Network Configuration File: C:\oracle\ora9I\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    ODBC1 =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    SID_LIST_ODBC1 =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = hsodbc)
        (SID_DESC =
          (GLOBAL_DBNAME = ODBC1)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = ODBC1)
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oracle\ora9I)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = orcl)
          (ORACLE_HOME = C:\oracle\ora9I)
          (SID_NAME = orcl)
      )then i restart both listener entries (ie lsnrctl start ODBC1 and lsnrctl start ) and both are running fine without any error below are the status.
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:42:09
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:15
    Uptime                    0 days 0 hr. 9 min. 56 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 2 instance(s).
      Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
      Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
      Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfullyLISTENER.ORA ODBC1 status
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:41:52
    Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1522)))
    STATUS of the LISTENER
    Alias                     ODBC1
    Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
    Start Date                05-MAR-2012 18:32:08
    Uptime                    0 days 0 hr. 9 min. 46 sec
    Trace Level               off
    Security                  OFF
    SNMP                      OFF
    Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
    Listener Log File         C:\oracle\ora9I\network\log\odbc1.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1522)))
    Services Summary...
    Service "ODBC1" has 1 instance(s).
      Instance "ODBC1", status UNKNOWN, has 2 handler(s) for this service...
    The command completed successfullyWhere hope i'm near to retrive the access data.
    Regards
    Moazam

  • Error while connecting to MDM server from Webdynpro

    Hi ,
       I am trying to connect to MDM server (5.5 SP04 no patches) through a webdynpro application . The following is the piece of code that I am using as a test .
    CatalogData CatalogData = new CatalogData();
        int resultLogin = 0;
        try {
              resultLogin = CatalogData.Login("USNOC01AQ05",2005,"Admin","Erico1234","English [US]");
        }catch(Exception e){
              wdContext.currentContextElement().setValueattr("Not Connected");
             //System.out.println("Error while establishing connection");
        if (resultLogin != RC.RC_OK){
              wdContext.currentContextElement().setValueattr("Not Connected");
             //System.out.println("Error logging to the SDM server");
             //System.exit(-1);
         wdContext.currentContextElement().setValueattr("Connected");
        //System.out.println("MDM server connected");
    The import statements are as follows
    import a2i.common.CatalogData;
    import a2i.generated.RC;
    I have put the following jar files in the java build path
    MDM4J
    mdm-admin
    mdm-common
    mdm-core
    mdm-data
    mdm-protocol
    When I deploy my application I get the following error
    java.lang.NoClassDefFoundError: a2i/common/CatalogData
    It can't be determined from the exception chain, which class loader failed to load the above class. But at least the class loader of the current application does not contain a resource with name 'a2i/common/CatalogData'.
    What do you guys think is the problem ?
    Regards
    DeepaK Singh

    Hi ,
       I found a document which says that MDM4J is the legacy API and is considered deprecated .The MDM Java API is the new one .I have both of them in the java build path . I am not sure if this is that cause of the problem .
    Now I had a look at the javadoc for the new API but I am not able to locate the class to obtain a connection to the MDM server from a custom application being built in Netweaver Developer Studio . Can someone help me out with the same ?What would be the code to obtain the connection to the MDM server with the new JAVA API ?
    Regards
    DeepaK Singh

  • ERROR while connecting to Netezza Database from oracle 10g via dblink.

    Gurus,
    We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    Server and/or port attributes are empty {HY000,NativeErr = 33}

    Manik wrote:
    We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    Server and/or port attributes are empty {HY000,NativeErr = 33}Always test ODBC client connectivity on the Oracle server to the remote and foreign database, first. Use the isql ODBC client command line interface (as the oracle or grid o/s user).
    If this does not work, then Oracle HSO will also not work.
    Once you have confirmed that this is working, then configure the HSO service for Oracle.
    If that fails, enables ODBC client tracing for that HSO service (in the init file for that service) to see exactly what ODBC calls Oracle is making and which of these are failing.

  • Error while connecting backend SAP 4.7 system to GRC 5.3 system

    Hi Experts,
    I am Facing an Connection Issue  while connecting back end SAP 4.7 system to GRC 5.3 system
    Please help me out with Screen screen shots and process  to be followed while connecting both system,
    Thanks in Advance,
    Ram

    Hi Daya,
    you really REALLY want to visit this page and watch & read for a few days before you do anything in the system.
    http://wiki.sdn.sap.com/wiki/display/BPX/Governance%2CRisk%2CandCompliance%28GRC%29How-ToGuides
    You can easily break stuff in a way that's hard to fix, so I suggest you take your time.
    Frank.

  • Error while connecting to Oracle 8 from PI 7.1

    I am trying the connect oracel 8.0 from PI 7.1,
    I am getting following error in communication channel monitoring
    "Exception caught during JDBC adapter processing: java.lang.NullPointerException "
    at the same time I can connect to oracle 10g smoothly without any error.
    Please suggest what would be the reason.
    regards,

    Hi Check this thread
    same problem disueed here & solved
    Error in Sender JDBC communication channel
    Regards
    Abhishek

Maybe you are looking for

  • Including the Date Range Criteria as part of the Title

    I am using LastFullMonth (great function) as part of my criteria for a report, and want to include this data as part of the title - "Bla Bla Report for the Following Dates:  mm/dd/yyyy to mm/dd/yyyy".  I am sure I will need to create a custom formula

  • Strange problem - APEX_ITEM.POPUPKEY_FROM_QUERY

    I am facing a strange problem when I use APEX_ITEM.POPUPKEY_FROM_QUERY in my report. When I select a value from LOV it returns the value to some different row and not to the row from where it was called. What should I do. I have long lists where cann

  • Image Prompts in OBIEE 11.1.1.5

    I am able to display an image as a logo on an analysis using the fmap notation... say fmap:Images/myimage.jpg. However, I am unable to use the image in an Image Prompt using either the fmap notation or explicit URL. I have uploaded the image to 2 loc

  • Import Duty

    Hi All, I am facing a problem, actually in my company, we have done the GRN of Imported material without done MIRO for the import duties, customs, CVD etc. Now we want to post the Customs. How we can do this. Thanks & Regards Pankaj Garg

  • Why does my ipod have a white screen?

    I was out with mt mates on a hot day, when i took out my ipod to plug into the speakers, i had a white screen and i can't do anything about it