Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Similar Messages

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while creating the Inspection plan by T.C QP01

Hello Friends,
In QP01, When i am trying to create a inspection plan system throwing the error message "The inspection plan identifier exists already. Enter another."
Message no. QP054
But in QP02, When i checked for that material, Plant, Group Number, Group counter, Usage, Status, i didn't find the entry over there.
Actually my requirement is to create a inspection plan for a material and plant combination with speicfic Usage as 61(customer requirement and status 4) but when i am trying to create that system throwing the error message explained above.
Thanks and Regards,
Jitendra Chauhan.
Edited by: jitendra chauhan on Jun 1, 2010 4:28 PM

Hello Friends,
Thanks for your valuable answers.
I checked in table MAPL, for a particular material, Plant, Group Number and Group Counter, there is no entry.
Where as in table PLKO, for a particular Group Number and Group Counter, entry is there. Actually this Inspection Plan Group Number and Group Counter is assigned to multiple materials through Material Assignment. If i delete the entry for this in table PLKO, than for all rest of the materials also entry will be deleted.
Hence how to resolve this?
Actually for other material number, same plant, same group number and same group counter, entry exist. So can i simply go in the inspection plan of other material,same plant,same group number,same group counter and than inside the material assignment to assign the required material code, plant and the group counter number?
Looking ahead for valuable inputs from the genius.
Thanks and Regards,
Jitendra
Edited by: jitendra chauhan on Jun 2, 2010 8:09 AM

Error while creating Contractors using Request Template

Hi,
Logged in as "xelsysadm". I have created "Contractor Request Template".
Logged in as "ContractorAdministrator" for him "ContractorRole"(Request Administrators) and "Contractor Authorization Policy"(create user) assigned.
When Contractor Administrator tries to create a contractor using "Contractor Request Template" getting the below errors...
oracle.iam.request.exception.AccessDeniedException: IAM-2050059:User OIMINTERNAL does not have access to create the request using Contractor Create User request template.
     at oracle.iam.request.repository.RequestTemplateManager.checkRoleAuthorization(RequestTemplateManager.java:165)
     at oracle.iam.request.repository.RequestTemplateManager.getTemplateForRequestCreation(RequestTemplateManager.java:218)
oracle.iam.request.exception.InvalidRequestDataException: IAM-2040049:UserManager Access Denied.:
     at oracle.iam.requestactions.plugins.datavalidator.CreateUserDataValidator.validate(CreateUserDataValidator.java:651)
     at oracle.iam.request.impl.RequestEngine.validateRequest(RequestEngine.java:1695)
Please help me..
Thanks,
Madhavi

If you are not using Template level approval you must associate approval policy( for Request level and operational level). I suggest, you change it to Template level .
To verify this follow below link
http://docs.oracle.com/cd/E14571_01/doc.1111/e14309/request.htm#OMDEV2873
create request template
http://docs.oracle.com/cd/E14571_01/doc.1111/e14316/req.htm

ORA-01152 error while creating db from custom template

I have a database based on the "general purpose/transaction processing" db, but with a custom tablespace/data added. I have attempted to clone this database by using dbca to create a custom template (including data) from this database. The template creation appears to be successful -- however, when I use dbca to try to create a new db from this custom template, I get the following error when dbca attempts to initialize the instance:
ORA-01152: file 5 was not restored from a sufficiently old backup
ORA-01110: data file 5: <path to my custom tablespace .dbf>
If I select "ignore" at this point, I get further errors, the next error is
ORA-06550: line 1, column 7: PLS-00201: Identifier 'DBMS_SERVICE.DELETE_SERVICE' must be declared
I'm using 11gR2, and am relatively inexperienced on the dba side, any help appreciated.
Thanks,
Ben

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Management studio error while creating/editing maintenance plan

Hi,
I had MS SQL 2012 enterprise edition installed and everything was working fine. Later I removed MS SQL 2012 and re-installed. Now when I am trying to create maintenance plan I am getting below error. When I click Yes system allows me to go through the maintenance
plan wizard and create new plan but when I want to edit it give me same error and it doesn't open screen to edit the plans. Can you please provide solution to below error?
Microsoft SQL Server Management Studio
The 'Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' package did not load correctly.
The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by running the application together with the /log parameter on the command line, and then examining the file 'C:\Users\pac\AppData\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'.Continue
to show this error message?
Yes No
I tried repair option from MS SQL 2012 setup but it didn't solve the problem. This is my production system and it has TFS 2013 and it's database. Please let me know how severe this problem is? Is it something to be worried about in future? How do I solve
this error?
Regards, Premal Acharya

Hi Michelle,
Thanks for your reply. I resolved this issues yesterday by installing SQL Server
Management Tools Complete. I suspect that
Microsoft.DataTransformationServices.VsIntegration.DtsPackage, Microsoft.DataTransformationServices.VsIntegration
DLL files were having issues. When I searched my system I could only find Microsoft.DataTransformationServices.VsIntegration.DLL and
Microsoft.DataTransformationServices.VsIntegration.DtsPackage.DLL file was missing.
When I re-ran the MS SQL setup to add new feature I selected Management Tools Complete and after installation this error was resolved. Though this has solved the issue for now I feel the error shouldn't have come with Management Tools -
Basic installation as I had installed MS SQL Server before with Management Tools - Basic and it had worked without any issues.
For now this issue is resolved but it will be of good help if I can know the cause of this error and what could be the possible solution.
Thanks.
Regards, Premal Acharya

Error While creating loan repayment plan

Hi
While I am reating loan repayment plan after making the necessary inputs in the loan(0045) IT it is showing the following errror. We are having only the interest free loans.
<b>Effect.int.rate cannot be calculated because no flow records exist</b>
because of this I can not put the loan end date for the loan type.
Pls give solution
Regards
Mathews

Hi,
I think you need to check these two points.
1. Are you giving the End date as 31.12.9999 or the date on which the loan will have been reapid completely. You need to give the end date as the one on which the loan gets repaid.
2. Otherwise please go to spro-payroll-your country payroll-loans-Calculation-Adjust Value Date (here give end date as 31.12.9999.
Please try the above two points and see if it works.
Regards,
Imran

Error while creating the development component project

Hello
i tried to create development component project through NWDS which is expected to be used as CallableObject but it gave following exception
Plugin name: Web Dynpro Archive Builder
Plugin ID: com.sap.ide.webdynpro.archivebuilder
Class: com.sap.ide.webdynpro.archivebuilder.project.WebDynproDevelopmentComponentProjectWizard
Method: createProject(String, IPath, IProgressMonitor)
Message: Invalid project description.
Exception: org.eclipse.core.internal.resources.ResourceException: Invalid project description in plugin name
I am using NWDS 7 version and using J2EE engine of NetWeaver 2004s server.
Thanks in advance.
Regards
Rajeev

Hi
sorry for that
see the below link ,it will be helpful for u.
Re: development component
Regards
Hazrath

Error while Updating Enterprise Link Plan in Design Studio

Hi, All
I am getting one Error while Creating Enterprise Link Plan in Design Studio of BAM and Failed to Create the Plan.
i.e.(IMessageSourceReceiver>messageReceive:javax.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found)
Setup:
Integration between Oracle EBS 11.5.10 and Oracle BAM 10.1.3.
I am trying to get the Raw Data and sending over to the Enterprise Link Plan.
1. Created bam_ttq AQ and bam_ttq_tab.
2. Configured all of the startup parameters required for Enterprise Message Source Type (Oracle (AS JMS and OJMS)) in the Administrator of BAM.
3. Configured the Oracle (AS JMS and OJMS) with the following values in the Enterprise Message Sources in the Architect of BAM.
Initial Context Factory : com.evermind.server.rmi.RMIInitialContextFactory.
JNDI Service Provider URL : opmn:ormi://inaportal.inatech.com:6004:home.
TopicConnectionFactory Name : java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab.
Topic Name : java:comp/resource/BAMTTT/Topics/bam_ttq.
JMS Message Type : Text Message.
Durable Subscriber Name (Optional) : Bamclient.
Message Selector (Optional) :
Client ID (Optional) : ClientId.
4. Also configured the data-sources.xml and applications.xml in OC4J (10.1.2) to reference the database schema where the BAM_TTQ queue is created.
5. Modified the jndi.properties file with required properties.
java.naming.security.principal = ias_admin
java.naming.security.credentials = inaportal321
java.naming.provider.url = opmn:ormi://inaportal.inatech.com:6004:home
java.naming.factory.initial = com.evermind.server.rmi.RMIInitialContextFactory
6. In the Design Studio I have a Plan with Oracle BAM Enterprise Message Receiver and Grid.
And when I am updating the plan I am getting the following error.
IMessageSourceReceiver->messageReceive: javax.naming.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "EBS_Example" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Can anybody pls help me out with this? Its Urgent for Me
Thx
Renuka.
Message was edited by:
Renuka

hi renuka..were u able to resolve this issue with the naming exception....cheers...

Error while creating ASN in SNC

dear all,
We are tring to create an ASN against a PO in "Due list for purchasing documents" in SNC but getting the following errors, the material is invalid, ship from location is invalid and the customer location is invalid.
PO created in ECC and received in SNC. The PO acknowledgement was also received back in ECC but not able to post ASN from SNC to ECC.
Request to please let us know if we have missed out on some master data setting?
Thanks in advance.
mahesh.

Hi Mahesh
I am also getting the similar type of errors while creating ASN against planned receipts in SNC . I was trying to find for some help & saw this thread.
Just wondering if you managed to rectify the error & able to post the ASN? Will appreciate if you can share the resolution with me.
We are also on SNC 7.02.
Regards,
Tapan

Error while creating rough cut plannin profile using Info structure

Hi,
I got the following error while creating rough cut planning profile for Info structure,
Capacity planning is not possible for this info structure S504
Message no. MA489
Diagnosis
In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
Procedure
If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
The info structure which i used here is created by me. Can any one help me to overcome this error
Waiting for your replies
G.Muthamil Murugan.

Hi addy,
Thanks for your reply. I have maintained the following Info structure which I created,
Under characteristic I have maintained the following,
1.Sales Organisation.
2.Sales group
3. Sales office
4. Distribution channel
5.Division
6.Material
Under Key figure I have maintain the following,
1. Order items
2. Production
3.Sales
4. Stock level
5. Target stock level
6. Day's Supply
7. available capacity
8.Target days supply
I don t know where i did mistake. can you correct me.
Regards,
Muthamil Murugan.G

Error while creating Quality Plan

Dear Experts,
While creating the Quality Plan following error is coming -"Error occured when checking type "
In the log of task list following error is appearing - "Op. 0060, CH 0060:char. iden % used for QDI several times in task list"
Please give your valuable suggestion onto this.
Thanks
Sumit

It means you are sending down the same characteristic to an external system like LIMS more then once.
I believe this is a warning. Not a hard error but I'm not 100%sure.
Craig

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating a Development plan template

Similar Messages

Maybe you are looking for