Error while creating a material using Bapi_material_savedata

Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.

Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all

Similar Messages

  • Recieving ORA-01722 invalid number error while creating a materialized view

    Hi,
    I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
    CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
    REFRESH FORCE ON DEMAND
    AS
    SELECT DISTINCT kr.request_id, org.org_unit_name,
    ebs_ch_ticket_type (kr.request_id) ticket_type,
    DECODE
    (kr.status_code,
    'CLOSED_SUCCESS', kr.last_update_date,
    'IN_PROGRESS', (SELECT MAX (start_time)
    FROM ebs_ch_datastore ecd1
    WHERE kr.request_id = ecd1.request_id
    AND workflow_step_name =
    'Final BA Review and Deployment Exit Criteria')
    ) closed_date,
    substr(krhd.visible_parameter12,1,10) siebel_start_date,
    kr.creation_date itg_start_date
    FROM kcrt_requests kr,
    kcrt_request_types krt,
    kcrt_req_header_details krhd, kcrt_request_details krd1,
    (SELECT koum.user_id user_id,
    DECODE (koup.org_unit_name,
    'IT Implementations', 'CHS - Service Management BA',
    koup.org_unit_name
    ) org_unit_name
    FROM krsc_org_unit_members koum, krsc_org_units koup
    WHERE 1 = 1
    AND 'Y' = koup.enabled_flag
    AND koum.org_unit_id = koup.org_unit_id
    AND EXISTS (
    SELECT 'X'
    FROM krsc_org_units kouc
    WHERE koup.org_unit_id = kouc.org_unit_id
    START WITH kouc.parent_org_unit_id =
    ANY (SELECT org_unit_id
    FROM krsc_org_units krsc_org_units1
    WHERE 'Clearinghouse' =
    org_unit_name)
    CONNECT BY kouc.parent_org_unit_id =
    PRIOR kouc.org_unit_id)
    UNION
    SELECT kou.manager_id user_id,
    DECODE
    (kou.org_unit_name,
    'IT Implementations', 'CHS - Service Management BA',
    kou.org_unit_name
    ) org_unit_name
    FROM krsc_org_units kou
    WHERE 'Y' = kou.enabled_flag
    START WITH kou.parent_org_unit_id =
    (SELECT org_unit_id
    FROM krsc_org_units krsc_org_units2
    WHERE 'Clearinghouse' = org_unit_name)
    CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
    WHERE krt.request_type_id = kr.request_type_id
    AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
    and kr.REQUEST_ID = krd1.request_id
    and krd1.batch_number = 1
    AND kr.request_id = krhd.request_id
    AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
    AND ( 'CLOSED_SUCCESS' = kr.status_code
    OR 'IN_PROGRESS' = kr.status_code
    AND kr.request_id IN (
    SELECT request_id
    FROM (SELECT DISTINCT request_id,
    MAX
    (start_time)
    closed_date
    FROM ebs_ch_datastore
    WHERE 'Final BA Review and Deployment Exit Criteria' =
    workflow_step_name
    GROUP BY request_id))
    Thanks,
    Shaik Mohiuddin

    This error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
    use
    where
    to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
    hope this helps..

  • Error while creating resource group using non-globalzones.

    Dear all,
    Hi techs please guide me how to create failover resource group in nongloablzones.
    I'm getting error while creating resource group using non-globalzones.
    My setup:
    I have two node cluster running sun cluster 3.2 configured and running properly.
    node1: sun5
    nide2: sun8
    I have create non-globalzone "zone1" in node:sun5
    I have create non-globalzone "zone2" in node:sun8
    node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
    *(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
    kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
    Thanks in advance,
    veera
    Edited by: veeraa on Dec 19, 2008 1:54 AM

    Hi Veera,
    Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
    zoneadm list -iv
    If zone1 or zone2 are not running then boot and configure them
    zoneadm -z <zone> boot
    zlogin -C <zone>
    After that you can continue to follow the step by step instructions at
    http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
    These may also help
    http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
    http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
    Regards
    Neil

  • [urgent ]runtime error  occured while creating the material using mm01

    hai
    am configure the ale program now . the problem is occured during the creating the material using mm01.
    am using client 000 (sending system). and i want to send the material to the client 400(receiving system)
    while am  save the created material using t-code mm01 in client 000 . it depicts the error as
    syntax error in program SAPLC140. 
    plz resolve this problem.
    regards
    surender

    Hi,
        In MM01 transaction code u have a problem..normally u will go to mm01 screen to create the material..i thought the same error will occur...so call basis to rectify this problem..
    Thank u,
    Manjula Devi.D

  • Error while creating 2nd Material Receipt after reversal of 1st MR

    Dear,
    Facing an error while creating Material Receipt.
    The gate entry of this material is 123456789.
    The 1st MR was created on 10/02/2011 & no. was 12345 with Location ABC via Z T-code.
    Under Quality this product was Rejected with Location XYZ.
    Due to Material was Rejected in Quality this MR 12345 was reversed through MB01 which produced a Reversal number 67890.
    Now the material is again on its original Location ABC.
    Now when the user is again creating an MR on 17/03/2011 of this material present at ABC location via using Z T-code it is producing an error stating that M/R already processed against 123456789 gate entry.
    We have done these several cases before also and there was no error shown when we created the 2nd MR for the same material after its reversal has been made.

    Dear,
    Problem solved.
    The problem was in PO.
    The person had unchecked the GR-basediv which caused the real trouble. The MR number was not appearing in MB03 & material was rejected in the QA11 so it was reversed through MB01.
    When again the MR was being punched then it was stating that the "MR already processed for the Gate Entry."
    PO was changed, Bill No. was changed by adding "A" & later deleting this "A" from Table level.

  • Error while creating new crosstab using

    I am getting the following error while creating a new crosstab object within Swing application. This error has started coming after we applied Oracle patch 9206 on database. The error originates from one of the classes in the olap_api_92.jar.
    ==========================================================
    Wed Feb 02 09:13:51 CST 2005 In BuilderWizardValidateAdapter::wizardValidatePage
    oracle.express.idl.util.OlapiException: No more data to read from socket
         at oracle.express.idl.ExpressOlapiDataSourceModule.DefinitionManagerInterfaceStub.crtCurMgrs2(DefinitionManagerInterfaceStub.java:927)
         at oracle.express.olapi.data.full.DefinitionManagerSince9202.createOLAPICursorManagers(DefinitionManagerSince9202.java:611)
         at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManagers(ExpressDataProvider.java:1325)
    =========================================================
    Please check the BIcheckconfig output. It does not show any errors.
    =========================================================
    <?xml version="1.0" encoding="UTF-8" ?>
    <BICheckConfig version="1.0.2.0">
    <Check key="JDEV_ORACLE_HOME" value="C:\Mohan\Installs\Jdev904"/>
    <Check key="JAVA_HOME" value="C:\Mohan\Installs\Jdev904\jdk"/>
    <Check key="JDeveloper version" value="9.0.4.0.1419"/>
    <Check key="BI Beans release description" value="BI Beans 9.0.4 Production Release"/>
    <Check key="BI Beans component number" value="9.0.4.23.0"/>
    <Check key="BI Beans internal version" value="2.7.5.32"/>
    <Check key="host" value="db03schgefage"/>
    <Check key="port" value="1521"/>
    <Check key="sid" value="biolapp"/>
    <Check key="user" value="nairs5"/>
    <Check key="Connecting to the database" value="Successful"/>
    <Check key="JDBC driver version" value="9.2.0.4.0"/>
    <Check key="JDBC JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\patches"/>
    <Check key="Database version" value="9.2.0.6.0"/>
    <Check key="OLAP Catalog version" value="9.2.0.6.0"/>
    <Check key="OLAP AW Engine version" value="9.2.0.6.0"/>
    <Check key="OLAP API Server version" value="9.2.0.6.0"/>
    <Check key="BI Beans Catalog version" value="N/A; not installed in nairs5"/>
    <Check key="OLAP API JAR file version" value="9.2"/>
    <Check key="OLAP API JAR file location" value="C:\Mohan\Installs\Jdev904\jdev\lib\ext"/>
    <Check key="OLAP API Metadata Load" value="Successful"/>
    <Check key="Number of metadata folders" value="3"/>
    <Check key="Number of metadata measures" value="569"/>
    <Check key="Number of metadata dimensions" value="5"/>
    <Check key="OLAP API Metadata">
    <![CDATA[==============================================================================
    Type Name (S=Schema, C=Cube, M=Measure, D=Dimension)
    ========= ====================================================================
    Folder... ROOT
    Folder... Auto Claim Measures
    Folder... Service Measures
    Folder... Claim Counts
    Folder... Cell Summary Cube
    Folder... Actual Measures
    Measure.. Actual Acceptance Rate
    Measure.. Actual Annualized Bill amt
    Measure.. Actual Application Count
    Measure.. Actual Avg Annual Billing
    Measure.. Actual Contacts Count
    Measure.. Actual Commission Amt
         at oracle.express.olapi.data.full.ExpressDataProvider.internalCreateCursorManager(ExpressDataProvider.java:680)
         at oracle.express.olapi.data.full.ExpressDataProvider.createCursorManager(ExpressDataProvider.java:586)
         at oracle.olapi.data.source.DataProvider.createCursorManager(DataProvider.java:268)
         at oracle.dss.dataSource.QueryUtilities.setUpCursors(QueryUtilities.java:559)
         at oracle.dss.dataSource.QueryServer._setUpCursorsForMainQuery(QueryServer.java:7039)
         at oracle.dss.dataSource.QueryServer._getCursorForCube(QueryServer.java:4098)
         at oracle.dss.dataSource.QueryServer._updateCube(QueryServer.java:4055)
         at oracle.dss.dataSource.QueryServer._applySelections(QueryServer.java:2661)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.dss.util.Operation.execute(Operation.java:69)
         at oracle.dss.dataSource.OperationQueue.update(OperationQueue.java:68)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
         at oracle.dss.dataSource.QueryServer.queueOperation(QueryServer.java:7076)
         at oracle.dss.dataSource.QueryServer.applySelection(QueryServer.java:2192)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.dss.util.Operation.execute(Operation.java:69)
         at oracle.dss.dataSource.QueryManagerServer.sendQueue(QueryManagerServer.java:1549)
         at oracle.dss.dataSource.common.OperationQueue.update(OperationQueue.java:198)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:176)
         at oracle.dss.dataSource.common.BaseOperationQueue.addOperation(BaseOperationQueue.java:146)
         at oracle.dss.dataSource.common.OperationQueue.addOperation(OperationQueue.java:127)
         at oracle.dss.dataSource.client.QueryClient.applySelection(QueryClient.java:970)
         at oracle.dss.dataSource.common.QueryQueryAccess$SelCursor.getDataAccess(QueryQueryAccess.java:1133)
         at oracle.dss.dataSource.common.QueryQueryAccess.getDataAccess(QueryQueryAccess.java:278)
         at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:639)
         at oracle.dss.datautil.QueryAccessUtilities._getValues(QueryAccessUtilities.java:705)
         at oracle.dss.datautil.QueryAccessUtilities.getValues(QueryAccessUtilities.java:608)
         at oracle.dss.queryBuilder.QueryBuilderUtils.getSelectedMeasures(QueryBuilderUtils.java:623)
         at oracle.dss.queryBuilder.SelectedItemsPanel.populateTree(SelectedItemsPanel.java:298)
         at oracle.dss.queryBuilder.SelectedItemsPanel.refreshTree(SelectedItemsPanel.java:333)
         at oracle.dss.queryBuilder.SelectedItemsPanel.setActive(SelectedItemsPanel.java:366)
         at oracle.dss.queryBuilder.ItemsPanel.setActive(ItemsPanel.java:251)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.setActive(DefaultBuilderDialog.java:1072)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.validateNextPreviousEvent(DefaultBuilderDialog.java:1396)
         at oracle.dss.datautil.gui.DefaultBuilderDialog$BuilderWizardValidateAdapter.wizardValidatePage(DefaultBuilderDialog.java:2113)
         at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
         at oracle.bali.ewt.wizard.WizardPage.validatePage(Unknown Source)
         at oracle.dss.datautil.gui.CustomImageWizardPage.validatePage(CustomImageWizardPage.java:81)
         at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
         at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
         at oracle.dss.datautil.gui.CustomWizard.doNext(CustomWizard.java:415)
         at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
         at java.awt.Dialog$1.run(Dialog.java:540)
         at java.awt.Dialog.show(Dialog.java:561)
         at java.awt.Component.show(Component.java:1133)
         at java.awt.Component.setVisible(Component.java:1088)
         at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.runDialog(DefaultBuilderDialog.java:489)
         at oracle.dss.datautil.gui.DefaultBuilderDialog.run(DefaultBuilderDialog.java:466)
         at oracle.dss.queryBuilder.QueryBuilder.run(QueryBuilder.java:2401)
         at gecf.pmg.PmgBiOlapApp.newCrosstabWiz(PmgBiOlapApp.java:1622)
         at gecf.pmg.PmgBiOlapApp.mNewCrosstab_ActionPerformed(PmgBiOlapApp.java:1563)
         at gecf.pmg.PmgBiOlapApp$5.actionPerformed(PmgBiOlapApp.java:696)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

    I suspect that you have either not fully applied the patch or alternatively the patching process did not complete.
    If you are using an analytic workspace, connect as OLAPSYS account and run the following commands:
    exec CWM2_OLAP_METADATA_REFRESH.MR_REFRESH
    exec CWM2_OLAP_METADATA_REFRESH.MR_AC_REFRESH
    If this does not resolve the error, and assuming your system worked prior to applying the 9206 patch, then the patch may need to be reapplied.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • Error while creating new projects using api

    Hello,
    I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
    Source template ID is invalid.
    ===
    My code is as follow:
    SET SERVEROUTPUT ON SIZE 1000000
    SET VERIFY OFF
    define no=&amg_number
    DECLARE
    -- Variables used to initialize the session
    l_user_id NUMBER;
    l_responsibility_id NUMBER;
    cursor get_key_members is
    select person_id, project_role_type, rownum
    from pa_project_players
    where project_id = 1;
    -- Counter variables
    a NUMBER := 0;
    m NUMBER := 0;
    -- Variables needed for API standard parameters
    l_commit VARCHAR2(1) := 'F';
    l_init_msg_list VARCHAR2(1) := 'T';
    l_api_version_number NUMBER :=1.0;
    l_return_status VARCHAR2(1);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    -- Variables used specifically in error message retrieval
    l_encoded VARCHAR2(1) := 'F';
    l_data VARCHAR2(2000);
    l_msg_index NUMBER;
    l_msg_index_out NUMBER;
    -- Variables needed for Oracle Project specific parameters
    -- Input variables
    l_pm_product_code VARCHAR2(30);
    l_project_in pa_project_pub.project_in_rec_type;
    l_key_members pa_project_pub.project_role_tbl_type;
    l_class_categories pa_project_pub.class_category_tbl_type;
    l_tasks_in pa_project_pub.task_in_tbl_type;
    -- Record variables for loading table variables above
    l_key_member_rec pa_project_pub.project_role_rec_type;
    l_class_category_rec pa_project_pub.class_category_rec_type;
    l_task_rec pa_project_pub.task_in_rec_type;
    -- Output variables
    l_workflow_started VARCHAR2(100);
    l_project_out pa_project_pub.project_out_rec_type;
    l_tasks_out pa_project_pub.task_out_tbl_type;
    -- Exception to call messag handlers if API returns an error.
    API_ERROR EXCEPTION;
    BEGIN
    -- Initialize the session with my user id and Projects, Vision Serves (USA0
    -- responsibility:
    select user_id into l_user_id
    from fnd_user
    where user_name = 'SSHAH';
    select responsibility_id into l_responsibility_id
    from fnd_responsibility_tl
    where responsibility_name = 'Projects Implementation Superuser';
    pa_interface_utils_pub.set_global_info(
    p_api_version_number => l_api_version_number,
    p_responsibility_id => l_responsibility_id,
    p_user_id => l_user_id,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status);
    if l_return_status != 'S' then
    raise API_ERROR;
    end if;
    -- Provide values for input variables
    -- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
    -- by the user. In this case we select a pre-defined one.
    select lookup_code into l_pm_product_code
    from pa_lookups
    where lookup_type = 'PM_PRODUCT_CODE'
    and meaning = 'Conversion';
    -- L_PROJECT_IN: We have to provide values for all required elements
    -- of this record (see p 5-13, 5-14 for the definition of the record).
    -- Customers will normally select this information from some external
    -- source
    l_project_in.pm_project_reference := 'AGL-AMG Project &no';
    l_project_in.project_name := 'AGL-AMG Project &no';
    l_project_in.created_from_project_id := 1;
    l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
    l_project_in.project_status_code := 'UNAPPROVED';
    l_project_in.start_date := '01-JAN-11';
    l_project_in.completion_date := '31-DEC-11';
    l_project_in.description := 'Trying Hard';
    l_project_in.project_relationship_code := 'Primary';
    -- L_KEY_MEMBERS: To load the key member table we load individual
    -- key member records and assign them to the key member table. In
    -- the example below I am selecting all of the key member setup
    -- from an existing project with 4 key members ('EE-Proj-01'):
    for km in get_key_members loop
    -- Get the next record and load into key members record:
    l_key_member_rec.person_id := km.person_id;
    l_key_member_rec.project_role_type := km.project_role_type;
    -- Assign this record to the table (array)
    l_key_members(km.rownum) := l_key_member_rec;
    end loop;
    -- L_CLASS_CATEGORIES: commented out below should fix the error we get
    -- because the template does not have an assigment for the mandatory class
    -- 'BAS Test'
    l_class_category_rec.class_category := 'Product';
    l_class_category_rec.class_code := 'Non-classified';
    -- Assign the record to the table (array)
    l_class_categories(1) := l_class_category_rec;
    -- L_TASKS_IN: We will load in a single task and a subtask providing only
    -- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
    -- the task record)
    l_task_rec.pm_task_reference := '1';
    l_task_rec.pa_task_number := '1';
    l_task_rec.task_name := 'Construction';
    l_task_rec.pm_parent_task_reference := '' ;
    l_task_rec.task_description := 'Plant function';
    -- Assign the top task to the table.
    l_taskS_in(1) := l_task_rec;
    -- Assign values for the sub task
    l_task_rec.pm_task_reference := '1.1';
    l_task_rec.pa_task_number := '1.1';
    l_task_rec.task_name := 'Brick laying';
    l_task_rec.pm_parent_task_reference := '1' ;
    l_task_rec.task_description := 'Plant building';
    -- Assign the subtask to the task table.
    l_tasks_in(2) := l_task_rec;
    -- All inputs are assigned, so call the API:
    pa_project_pub.create_project
    (p_api_version_number => l_api_version_number,
    p_commit => l_commit,
    p_init_msg_list => l_init_msg_list,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status,
    p_workflow_started => l_workflow_started,
    p_pm_product_code => l_pm_product_code,
    p_project_in => l_project_in,
    p_project_out => l_project_out,
    p_key_members => l_key_members,
    p_class_categories => l_class_categories,
    p_tasks_in => l_tasks_in,
    p_tasks_out => l_tasks_out);
    -- Check the return status, if it is not success, then raise message handling
    -- exception.
    IF l_return_status != 'S' THEN
    dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
    dbms_output.put_line('Error: ret status: '||l_return_status);
    RAISE API_ERROR;
    END IF;
    -- perform manual commit since p_commit was set to False.
    COMMIT;
    --HANDLE EXCEPTIONS
    EXCEPTION
    WHEN API_ERROR THEN
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    WHEN OTHERS THEN
    dbms_output.put_line('Error: '||sqlerrm);
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    END;
    ===
    Msg_count: 1
    Error: ret status: E
    ERROR: 1: Project: 'AGL-AMG Project 1123'
    Source template ID is invalid.
    PL/SQL procedure successfully completed.

    I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

  • Error while creating activity by using BAPI

    Hi,
    While creating activity by using BAPI Im getting error as follows,
    Start processing of refference object handle generated.
    Integrity rule a d0008 broken
    business partner with function from vbkakom not vbpakom
    Integrity rule a d0008 broken
    edit all incomplete field .
    Please help me for solving this issue.
    Regards,
    Suresh

    Not received any proper reply Closing the issue.

  • Error while creating logical file using transaction FILE

    Hello there,
    I am facing an error while creating Logical File name definition using transaction FILE
    This is the input which I'm trying to give
    Logical file name: ZTEST
    Name : ZTEST
    Physical file : ZTEST_1<DATE><TIME>.csv
    Data format: ASC
    Application area: BW
    Logical path:ZTEST_1_DATAOUT
    when I tried to save it throws me an error like  ASSIGN_SUBSTRING_NOT_ALLOWED
    Please help.

    Hi,
    Please check the OSS Notes :
    Note 792061 - SP Case Locator: Dump: ASSIGN to a substring isn't allowed.
    SAP Note 1297989 - Short dump ASSIGN_SUBSTRING_NOT_ALLOWED
    Hope this solves the problem.
    -Vikram

  • Error while creating a Material

    Hai Friends,
              I am facing a problem while creating,display,change material. i.e i am unable to create a new material or edit/display an existing material.
             The error is : Record ZP doesnot exist in table T113E.
             Message No: M3748
             But i could create a purchase order for an existing material.

    I am not on SAP today, so I do not know for what table 113E is used.
    go to SE16, enter T113* and hit F4, SAP will list all T113 tables and you can see its description.
    This may help you to know about what field the error is talking.
    I guess the ZP is somewhere on a view inyour material master, but the related entry was deleted from customizing table T113E. As SAP checks all field values when saving, you get this error,
    Just open any view in your material master and find this ZP entry and relace it with a valid value then you can save without getting this error.
    Finally you should use SE16 to find all materials having this ZP value and then replace it with MM17 mass maintenance

  • Error while Creating a PO using BAPI_PO_CREATE1

    Hi Friends,
         The following issue that I have observed and as explained below is one of the weirdest scenarios that I have seen while working with SAP. Hence, kindly help me with possible errors from my end. I am working on ECC 6.0.
    Requirement: To automatically create a PO.
    Option used: I have used a BAPI: u2018BAPI_PO_CREATE1u2019
    Scenario: When I execute the BAPI u2018BAPI_PO_CREATE1u2019 directly in sequence with u2018BAPI_TRANSACTION_COMMITu2019, the PO gets created successfully. The data entered as input is:
    POHEADER-COMP_CODE
    POHEADER-DOC_TYPE
    POHEADER-PMNTTRMS
    POITEM-PO_ITEM
    POITEM-QUANTITY
    POITEM-TAX_CODE
    POITEM-TAXJURCODE
    POITEM-RFQ_NO
    POITEM-RFQ_ITEM
    POITEM-PREQ_NO
    POITEM-PREQ_ITEM
    POITEM-PREQ_NAME
    POSCHEDULE-PO_ITEM
    POSCHEDULE-SCHED_LINE
    POSCHEDULE-QUANTITY
    POSCHEDULE-PREQ_NO
    POSCHEDULE-PREQ_ITEM
    Problem: I need to pass data to the BAPI through code, so I called the BAPI u2018BAPI_PO_CREATE1u2019 and u2018BAPI_TRANSACTION_COMMITu2019 in a test function module as well as report. I passed the same data as mentioned above i.e. while creating the PO by passing data to the BAPI directly.
    But the BAPI returns an error BAPI header data still faulty, enter plant, Pur. Org., Pur. Grp., etc.
    I tried by passing all the available data for the header and then for the items, but finally, I still get an error that the item is from a different order account and just cannot create a PO.
    The Test FM code is as shown below:
      DATA : PYMNT_TERMS    TYPE YOAF_SEC_MASTER-TER_PYMNT.
      DATA : ITEM_NO(4) .
      DATA : CURRENCY TYPE LFM1-WAERS.
      DATA : POHEAD         TYPE BAPIMEPOHEADER.
      DATA : POHEADX        TYPE BAPIMEPOHEADERX.
      DATA : EXP_HEAD       TYPE BAPIMEPOHEADER.
      DATA : POITEM         TYPE TABLE OF BAPIMEPOITEM WITH HEADER LINE.
      DATA : POITEMX        TYPE TABLE OF BAPIMEPOITEMX WITH HEADER LINE.
      DATA : POSCHED        TYPE TABLE OF BAPIMEPOSCHEDULE WITH HEADER LINE.
      DATA : POSCHEDX       TYPE TABLE OF BAPIMEPOSCHEDULX WITH HEADER LINE.
      DATA : EX_PO_NUMBER   TYPE BAPIMEPOHEADER-PO_NUMBER.
      CONSTANTS : C_X VALUE 'X'.
      POHEAD-COMP_CODE  = 'P110'.
      POHEAD-DOC_TYPE   = DOC_TYPE.
      POHEAD-PMNTTRMS   = 'P10'.
      POHEADX-COMP_CODE  = C_X.
      POHEADX-DOC_TYPE   = C_X.
      POHEADX-PMNTTRMS   = C_X.
      POITEM-PO_ITEM    = '00001'.
      POITEM-QUANTITY   = '1.000'.
      POITEM-TAX_CODE   = 'D2'.
      POITEM-TAXJURCODE = 'MH01'.
      POITEM-RFQ_NO     = '2300009491'.
      POITEM-RFQ_ITEM   = '00001'.
      POITEM-PREQ_NO    = '200003583'.
      POITEM-PREQ_ITEM   = '00001'.
      POITEM-PREQ_NAME  = 'SACHIN'.
      APPEND POITEM.
      POITEMX-PO_ITEM    = '00001'.
      POITEMX-PO_ITEMX   = C_X.
      POITEMX-QUANTITY   = C_X .
      POITEMX-TAX_CODE   = C_X .
      POITEMX-TAXJURCODE = C_X .
      POITEM-RFQ_NO      = C_X.
      POITEM-RFQ_ITEM    = C_X.
      POITEM-PREQ_NO     = C_X.
      POITEM-PREQ_ITEM   = C_X.
      POITEMX-PREQ_NAME  = C_X.
      APPEND POITEMX.
      POSCHED-PO_ITEM        = '00001'.
      POSCHED-SCHED_LINE     = '0001'.
      POSCHED-QUANTITY       = '1.000'.
      POSCHED-PREQ_NO        = '1200003583'.
      POSCHED-PREQ_ITEM      = '00001'.
      APPEND POSCHED.
      POSCHEDX-PO_ITEM        = '1'.
      POSCHEDX-SCHED_LINE     = '0001'.
      POSCHEDX-PO_ITEMX       = C_X.
      POSCHEDX-SCHED_LINEX    = C_X.
      POSCHEDX-QUANTITY       = C_X.
      POSCHEDX-PREQ_NO        = C_X.
      POSCHEDX-PREQ_ITEM      = C_X.
      APPEND POSCHEDX.
      CALL FUNCTION 'BAPI_PO_CREATE1'
          EXPORTING
            POHEADER                     = POHEAD
            POHEADERX                    = POHEADX
          IMPORTING
            EXPPURCHASEORDER             = EX_PO_NUMBER
            EXPHEADER                    = EXP_HEAD
               EXPPOEXPIMPHEADER             =
          TABLES
            RETURN                       = RETURN_ERROR
            POITEM                       = POITEM
            POITEMX                      = POITEMX
               POADDRDELIVERY               =
            POSCHEDULE                   = POSCHED
            POSCHEDULEX                  = POSCHEDX
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT   = 'X'
        IMPORTING
          RETURN = RETURN_ERROR.

    Hi,
    As mentioned that this error was one of the wierdest SAP issues I have faced, it was due to the silliest copy paste errors on my behalf. I completely overlooked the POITEMX naming.
    For 4 values of RFQ_NO, RFQ_ITEM, PREQ_NO, PREQ_ITEM, I didnt have the 'X' for POITEMX and kept on looking for errors for days.
    BAPI_PO_CREATE1 works with min. possible inputs successfully.
    Thanks to all!

  • Error while creating a cube using Cube Builder

    we have installed the Cube builder for SSM 7.0
    while creating the cube I am facing a error and the .TRC file contents are as follows :-
    LSS>
    LSS> set control LINKID SSM_CB_EA
    LSS>
    LSS> .... capture cube id in a control var to simplify queries on other tables
    LSS> access lslink
    LSLink> connect SSM_CB_EA
    LSLink>
    LSLink> SELECT ID FROM CPMS_CB_CUBES WHERE NAME = 'CUBEBUILDER1'
    [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'CPMS_CB_CUBES'.
    SQLSTATE: S0002
    SQL System code: 208
    LSLink> lss create code = 'set control CUBEID ' + ID
    LSLink> output proc setcubeid;PIPADMINDEFAULT over
    LSLink> peek create nohead nonumb
    No Fields currently Selected
    ACC004:
    No Record Has Been Accessed From the Database.
    ACC004:
    No Record Has Been Accessed From the Database.
    CHE FRE
    CHE UPD
    Kindly help me out........

    Hi Martin,
    I believe that the issue you are encountering now is that you're using the wrong set of procedures for accessing MS SQL Server.
    In section 5.4.1 (Setting up SAP NetWeaver System database software) in the Strategy Management configuration guide, there is a section which discusses steps that are required depending on whether or not you are using MaxDB or MS SQL Server as your system database behind NetWeaver CE.  My guess is that you have not followed the steps described for SQL Server here.  This is simple to do thoughm, because all you need to do is copy the files in the "<install-dir>\SAP\SSM\InternetPub\procs\sqlsrvr_procs" into the <install-dir>\SAP\SSM\InternetPub\procs" directory.
    This is required because, when using Cube Builder or Entry and Appropval, the PAS component communicates directly with the system database in order to load data from there into PAS.  Because MaxDB and SQL Server have different SQL syntax, specifically regarding field concatenation, slightly different SQL is required.  So if you copy the SQL Server specific procedures across, you should be able to successfully build your model from Cube Builder.
    Of course, having read through your question again I'm not 100% sure that this is what you are hitting.  The problem you're seeing seems to be that, when we internally concatenate some selected fields together, we aren't finding a field called ID.  However, the SQL select being issued doesn't seem to have returned any error messages, so I'm not sure why there is a problem referencing the field.
    The only thing that comes to mind is a problem that I ran into at one point with the type of driver I was using to connect to SQL Server.  The PAS component of Strategy Management, even though it runs on Windows 2003 Server 64bit, is still only a 32bit component.  This means that, when configuring the System Data Sources within the ODBC applet in Control Panel, it is critical that the 32bit version of that ODBC applet be used - as documented in the note at the end of section 5.4.3 in the configuration guide.  The reason this is important is because, if you use an OLEDB connection to SQL Server, for some reason the field names are not returned correctly.  It is only when using the ODBC driver that the field names are returned correctly.
    So please ensure that you are using the ODBC driver for your Link ID which connects to SQL Server, and not an OLEDB connection.
    Hope this helps,
    Robert
    Edited by: Robert Holland on Dec 19, 2008 3:23 PM

  • Error while creating Time Card Using API

    Hello
    I have a requirement to run OTL Interface once day to create/update Time Card in OTL for those datea created on sysdate-1 in Service Module (data will get feeded from Service Module). For example this interface will run on sysdate to create time cards for those data created in the service module on sysdate-1.
    I have some sample data and code I am using but it is erroring out with different errors..Can anybody help me on this
    My Interface should run as expected below and my time card range will be Monday 24-Dec-2012 to Sunday 30-Dec-2012
    Interface Run Date Time Entry to process
    25-Dec-2012 24-Dec-2012 Data
    26-Dec-2012 25-Dec-2012 Data
    CREATE OR REPLACE PROCEDURE main_process (o_errbuf OUT VARCHAR2,
    o_ret_code OUT NUMBER,
    l_chr_from_date IN VARCHAR2,
    l_chr_to_date IN VARCHAR2)
    IS
    l_chr_skip VARCHAR2 (1);
    l_chr_task_exists VARCHAR2 (100);
    l_chr_error_msg VARCHAR2 (4000);
    l_num_tbb_id NUMBER;
    l_num_request_id NUMBER := fnd_global.conc_request_id;
    l_num_login_id NUMBER := fnd_global.login_id;
    l_num_user_id NUMBER := fnd_global.user_id;
    l_num_resp_id NUMBER := fnd_Profile.VALUE ('resp_ID');
    l_num_otl_appl_id CONSTANT NUMBER (3) := 809; -- This is the appl_id for OTL, do not change
    l_chr_proj_attr1 CONSTANT VARCHAR2 (7) := 'Task_Id';
    l_chr_proj_attr2 CONSTANT VARCHAR2 (10) := 'Project_Id';
    l_chr_proj_attr3 CONSTANT VARCHAR2 (16) := 'Expenditure_Type';
    l_chr_proj_attr4 CONSTANT VARCHAR2 (19) := 'Expenditure_Comment';
    l_chr_proj_attr5 CONSTANT VARCHAR2 (23) := 'SYSTEM_LINKAGE_FUNCTION';
    i_num_count NUMBER;
    i_num_rows_inserted NUMBER := NULL;
    l_chr_message fnd_new_messages.MESSAGE_TEXT%TYPE;
    l_chr_hdr_eligible VARCHAR2 (5);
    l_tbl_timecard_info hxc_self_service_time_deposit.timecard_info;
    l_tbl_attributes_info hxc_self_service_time_deposit.app_attributes_info;
    l_tbl_messages hxc_self_service_time_deposit.message_table;
    l_new_timecard_id NUMBER;
    l_new_timecard_ovn NUMBER;
    l_num_time_building_block_id hxc_time_building_blocks.time_building_block_id%TYPE;
    I NUMBER; --PENDING REMOVE
    l_message VARCHAR2 (2000); --PENDING REMOVE
    l_time_building_block_id NUMBER; --PENDING REMOVE
    CURSOR process_line
    IS
    SELECT ROWID ROW_ID, a.*
    FROM xxpowl.xxpowl_hxt_otl_intf a
    WHERE 1 = 1 --a.request_id = l_num_request_id
    AND a.status_flag = 'NEW' -- 'VALID'
    AND a.error_desc IS NULL
    AND a.service_activity_type IS NOT NULL;
    BEGIN
    FND_FILE.PUT_LINE (
    fnd_file.LOG,
    'Entered From Date:'
    || (TO_DATE ( (l_chr_from_date), 'YYYY/MM/DD HH24:MI:SS')));
    FND_FILE.PUT_LINE (
    fnd_file.LOG,
    'Entered To Date:'
    || (TO_DATE ( (l_chr_to_date), 'YYYY/MM/DD HH24:MI:SS')));
    FND_GLOBAL.APPS_INITIALIZE (user_id => l_num_user_id,
    resp_id => l_num_resp_id,
    resp_appl_id => l_num_otl_appl_id);
    BEGIN
    FND_FILE.PUT_LINE (
    fnd_file.LOG,
    'Inserting the data in the custom table XXPOWL_HXT_OTL_INTF');
    INSERT INTO xxpowl.XXPOWL_HXT_OTL_INTF (SR_NUMBER,
    PROJECT_TASK_OWNER,
    PROJECT_TASK_OWNER_PERSON_ID,
    PROJECT_ID,
    PROJECT_TASK_ID,
    ASSIGNEE,
    ASSIGNEE_ID,
    ASSIGNEE_PERSON_ID,
    ASSIGNEE_SUPERVISOR_PERSON_ID,
    TASK_NUMBER,
    PARENT_TASK_NUMBER,
    DEBRIEF_NUMBER,
    DEBRIEF_HEADER_ID,
    DEBRIEF_DATE,
    TASK_ASSIGNMENT_ID,
    DEBRIEF_OBJECT_VERSION_NUMBER,
    DEBRIEF_PER_COMPLETE,
    DEBRIEF_LINE_ID,
    DEBRIEF_PROCESS,
    SERVICE_ACTIVITY,
    SERVICE_ACTIVITY_TYPE,
    INVENTORY_ITEM_ID,
    ITEM,
    BUSINESS_PROCESS_ID,
    DEBRIEF_TRANSACTION_TYPE_ID,
    DEBRIEF_UOM_CODE,
    DEBRIEF_HOURS,
    CONV_DEBRIEF_IN_HOURS,
    DEBRIEF_START_TIME,
    DEBRIEF_END_TIME,
    DEBRIEF_SERVICE_DATE,
    NOTES,
    OTL_ELIGIBLE_FLAG,
    NOTIF_SENT_FLAG,
    NOTIF_ELIGIBLE_FLAG,
    ERROR_DESC,
    STATUS_FLAG,
    INITIAL_NOTIF_SENT_DATE,
    CREATION_DATE,
    CREATED_BY,
    LAST_UPDATE_DATE,
    LAST_UPDATED_BY,
    LAST_UPDATE_LOGIN,
    REQUEST_ID,
    INITIAL_REQUEST_ID)
    (SELECT b.incident_number sr_number,
    h.resource_name project_task_owner,
    h.source_id project_task_owner_person_id,
    b.external_attribute_1 project_id,
    b.external_attribute_2 project_task_id,
    jtf_task_utl.get_owner (d.resource_type_code, d.resource_id)
    assignee,
    d.resource_id assignee_id,
    jrre.source_id assignee_person_id,
    paa.supervisor_id assignee_supervisor_person_id,
    c.task_number task_number,
    (SELECT task_number
    FROM jtf_tasks_b z
    WHERE c.parent_task_id = z.task_id)
    parent_task_number,
    a.debrief_number,
    a.debrief_header_id debrief_header_id,
    a.debrief_date debrief_date,
    a.task_assignment_id task_assignment_id,
    a.object_version_number debrief_object_version_number,
    a.attribute1 debrief_per_complete,
    e.debrief_line_id debrief_line_id,
    cbp.name debrief_process,
    cttv.name service_activity,
    DECODE (cttv.attribute1,
    'Y', 'Service-Billable',
    'N', 'Service-Non Billable')
    service_activity_type,
    e.inventory_item_id inventory_item_id, --f.segment1 item,
    (SELECT segment1
    FROM mtl_system_items_b f
    WHERE e.inventory_item_id = f.inventory_item_id
    AND f.organization_id = b.inv_organization_id)
    item, --241 --Mater Org
    e.business_process_id business_process_id,
    e.transaction_type_id debrief_transaction_type_id,
    e.uom_code debrief_uom_code,
    e.quantity debrief_hours,
    (g.conversion_rate * e.quantity) conv_debrief_in_hours,
    e.labor_start_date debrief_start_time,
    e.labor_end_date debrief_end_time,
    e.service_date debrief_service_date,
    (SELECT note_tl.notes
    FROM JTF_NOTES_B NOTE, JTF_NOTES_TL NOTE_TL
    WHERE NOTE.JTF_NOTE_ID = NOTE_TL.JTF_NOTE_ID
    AND NOTE_TL.LANGUAGE = USERENV ('LANG')
    AND NOTE.SOURCE_OBJECT_ID = a.DEBRIEF_HEADER_ID
    AND note.jtf_note_id =
    (SELECT MAX (note1.jtf_note_id)
    FROM JTF_NOTES_B note1
    WHERE NOTE1.SOURCE_OBJECT_ID =
    a.DEBRIEF_HEADER_ID))
    notes,
    'Y',
    'N',
    'X',
    NULL,
    'NEW',
    NULL,
    SYSDATE,
    l_num_user_id,
    SYSDATE,
    l_num_user_id,
    l_num_login_id,
    l_num_request_id,
    l_num_request_id
    FROM csf_debrief_headers a,
    cs_incidents_all_b b,
    jtf_tasks_b c,
    jtf_task_assignments d,
    csf_debrief_lines e, --mtl_system_items_b f,
    mtl_uom_conversions g,
    jtf_rs_resource_extns_vl h,
    cs_business_processes cbp,
    cs_transaction_types_vl cttv --, cs_sr_task_debrief_notes_v notes
    jtf_rs_resource_extns_vl jrre,
    per_all_assignments_f paa
    WHERE a.task_assignment_id = d.task_assignment_id
    AND d.task_id = c.task_id
    AND c.source_object_id = b.incident_id
    AND c.source_object_type_code = 'SR'
    AND a.debrief_header_id = e.debrief_header_id
    AND e.uom_code = g.uom_code
    AND g.uom_class = 'Time'
    AND b.incident_owner_id = h.resource_id(+)
    AND e.business_process_id = cbp.business_process_id
    AND e.transaction_type_id = cttv.transaction_type_id
    AND d.resource_id = jrre.resource_id
    AND jrre.source_id = paa.person_id --= 181
    AND TRUNC (SYSDATE) BETWEEN paa.effective_start_date
    AND paa.effective_end_date
    AND TRUNC (e.last_update_date) BETWEEN TO_DATE (
    (l_chr_from_date),
    'YYYY/MM/DD HH24:MI:SS')
    AND TO_DATE (
    (NVL (
    l_chr_to_date,
    l_chr_from_date)),
    'YYYY/MM/DD HH24:MI:SS')
    AND NOT EXISTS
    (SELECT 1
    FROM xxpowl.XXPOWL_HXT_OTL_INTF old
    WHERE old.debrief_header_id =
    e.debrief_header_id
    AND old.task_number = c.task_number
    AND TRUNC (old.DEBRIEF_SERVICE_DATE) =
    TRUNC (e.SERVICE_DATE)
    AND old.DEBRIEF_TRANSACTION_TYPE_ID =
    e.TRANSACTION_TYPE_ID
    AND old.request_id <> l_num_request_id
    AND old.DEBRIEF_UOM_CODE = e.uom_code
    AND old.DEBRIEF_HOURS = e.quantity));
    i_num_rows_inserted := SQL%ROWCOUNT;
    fnd_file.put_line (fnd_file.LOG,
    'No of rows Inserted:' || i_num_rows_inserted);
    COMMIT;
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || 'Error while Inserting debrief lines data into custom table.Error: '
    || SQLERRM
    || '. Exiting the interface without processing further';
    fnd_file.put_line (fnd_file.LOG, l_chr_error_msg);
    ROLLBACK;
    RETURN;
    END;
    FOR process_line_rec IN process_line
    LOOP
    l_chr_error_msg := NULL;
    l_tbl_timecard_info.delete;
    l_tbl_attributes_info.delete;
    l_tbl_messages.delete;
    l_new_timecard_id := NULL;
    l_new_timecard_ovn := NULL;
    l_num_time_building_block_id := NULL;
    l_chr_message := NULL;
    i_num_count := 0;
    l_num_tbb_id := NULL;
    BEGIN
    hxc_timestore_deposit.create_time_entry (
    p_measure => process_line_rec.conv_debrief_in_hours,
    p_day => TO_DATE ( (process_line_rec.debrief_service_date),
    'DD/MM/RRRR'),
    p_resource_id => process_line_rec.assignee_person_id,
    p_comment_text => process_line_rec.notes
    || '....Remove this notes in the code logic....Request Id:'
    || l_num_request_id, --pending lokesh
    p_app_blocks => l_tbl_timecard_info,
    p_app_attributes => l_tbl_attributes_info,
    p_time_building_block_id => l_num_time_building_block_id);
    fnd_file.put_line (
    fnd_file.LOG,
    'Step#1 completed, TIME_BUILDING_BLOCK_ID:'
    || l_num_time_building_block_id);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#1 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    -- Classify Time
    -- Attribute1
    hxc_timestore_deposit.create_attribute (
    p_building_block_id => l_num_time_building_block_id,
    p_attribute_name => 'Task_Id',
    p_attribute_value => process_line_rec.project_task_id,
    p_app_attributes => l_tbl_attributes_info);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#2 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    -- Attribute2
    hxc_timestore_deposit.create_attribute (
    p_building_block_id => l_num_time_building_block_id,
    p_attribute_name => 'Project_Id',
    p_attribute_value => process_line_rec.project_id,
    p_app_attributes => l_tbl_attributes_info);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#3 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    -- Attribute3
    hxc_timestore_deposit.create_attribute (
    p_building_block_id => l_num_time_building_block_id,
    p_attribute_name => 'Expenditure_Type',
    p_attribute_value => 'Service-Billable',
    -- p_attribute_value=> 'Service-Non Billable',
    p_app_attributes => l_tbl_attributes_info);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#4 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    -- Attribute4
    hxc_timestore_deposit.create_attribute (
    p_building_block_id => l_num_time_building_block_id,
    p_attribute_name => 'Expenditure_Comment',
    p_attribute_value => 'Expenditure Comment created by API',
    p_app_attributes => l_tbl_attributes_info);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#5 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    -- Attribute5
    hxc_timestore_deposit.create_attribute (
    p_building_block_id => l_num_time_building_block_id,
    p_attribute_name => 'SYSTEM_LINKAGE_FUNCTION',
    p_attribute_value => 'ST',
    p_app_attributes => l_tbl_attributes_info);
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#6 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM;
    END;
    BEGIN
    hxc_timestore_deposit.execute_deposit_process (
    p_validate => FALSE,
    p_app_blocks => l_tbl_timecard_info,
    p_app_attributes => l_tbl_attributes_info,
    p_messages => l_tbl_messages,
    p_mode => 'SAVE', -- p_mode-> 'SUBMIT', 'SAVE', 'MIGRATION', 'FORCE_SAVE' or 'FORCE_SUBMIT'
    p_deposit_process => 'OTL Deposit Process',
    p_timecard_id => l_new_timecard_id,
    p_timecard_ovn => l_new_timecard_ovn);
    COMMIT;
    hxc_timestore_deposit.log_messages (p_messages => l_tbl_messages);
    IF (l_tbl_messages.COUNT <> 0)
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error in INSERT API CALL at Step#7 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM
    || '.API Error messages are:';
    i_num_count := l_tbl_messages.FIRST;
    LOOP
    EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
    l_chr_message :=
    fnd_message.get_string (
    appin => l_tbl_messages (i_num_count).application_short_name,
    namein => l_tbl_messages (i_num_count).message_name);
    fnd_file.put_line (
    fnd_file.LOG,
    (l_tbl_messages (i_num_count).message_name));
    l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
    i_num_count := l_tbl_messages.NEXT (i_num_count);
    END LOOP;
    END IF;
    EXCEPTION
    WHEN OTHERS
    THEN
    fnd_file.put_line (
    fnd_file.LOG,
    '**** Error.....Inside Exception Block in execute_deposit_process');
    BEGIN
    hxc_timestore_deposit.log_messages (
    p_messages => l_tbl_messages);
    EXCEPTION
    WHEN OTHERS
    THEN
    fnd_file.put_line (
    fnd_file.LOG,
    '*****Error....Inside Exception Block in hxc_timestore_deposit.log_messages.Error:'
    || SQLERRM);
    END;
    l_chr_error_msg :=
    l_chr_error_msg
    || 'Error in INSERT API CALL at Step#7 for the debrief line id: '
    || process_line_rec.debrief_line_id
    || '.Error:'
    || SQLERRM
    || '.API Error messages are:';
    IF (l_tbl_messages.COUNT <> 0)
    THEN
    i_num_count := l_tbl_messages.FIRST;
    LOOP
    EXIT WHEN (NOT l_tbl_messages.EXISTS (i_num_count));
    l_chr_message :=
    fnd_message.get_string (
    appin => l_tbl_messages (i_num_count).application_short_name,
    namein => l_tbl_messages (i_num_count).message_name);
    l_chr_error_msg := l_chr_error_msg || l_chr_message || '.';
    i_num_count := l_tbl_messages.NEXT (i_num_count);
    END LOOP;
    END IF;
    END;
    COMMIT;
    IF l_chr_error_msg IS NOT NULL OR l_new_timecard_id IS NULL
    THEN
    fnd_file.put_line (fnd_file.LOG,
    '***** Error *****' || l_chr_error_msg);
    o_ret_code := 1;
    END IF;
    BEGIN
    fnd_file.put_line (
    fnd_file.LOG,
    'Updating the status of the record in custom table for debrief_line_id:'
    || process_line_rec.debrief_line_id);
    UPDATE xxpowl.XXPOWL_HXT_OTL_INTF
    SET status_flag =
    DECODE (
    l_chr_error_msg,
    NULL, DECODE (
    l_new_timecard_id,
    NULL, 'FAILED',
    DECODE (SIGN (l_new_timecard_id),
    '1', 'SUCESS',
    'FAILED')),
    'FAILED'),
    time_building_block_id = l_new_timecard_id,
    last_update_date = SYSDATE,
    request_id = l_num_request_id,
    last_updated_by = l_num_user_id,
    error_desc = l_chr_error_msg
    WHERE ROWID = process_line_rec.row_id;
    COMMIT;
    EXCEPTION
    WHEN OTHERS
    THEN
    l_chr_error_msg :=
    l_chr_error_msg
    || '.Error while updating the status to SUCCESS.Error: '
    || SQLERRM;
    END;
    END LOOP; --process_line
    EXCEPTION
    WHEN OTHERS
    THEN
    FND_FILE.PUT_LINE (
    fnd_file.LOG,
    'Unknown/Unhandlled Exception Error......' || SQLERRM);
    o_ret_code := 2;
    END main_process;
    SHOW ERR;
    Error Messages:
    1. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_ROLLBACK_TIMECARDS_PK) violated.
    2. Error in INSERT API CALL at Step#7 for the debrief line id: 41011.Error:ORA-00001: unique constraint (HXC.HXC_LATEST_DETAILS_FK) violated
    Thanks a lot for the help!

    Hello
    We will get this error message when we run this from application other than "Time and Labor Engine". So try to run this concurrent program (if you registered as a conc. program) from Time and Labor Engine application.
    --Lokesh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Error while creating part appraisers using HRHAP_DOCUMENT_CREATE

    Hi All,
    I was able to successfully create a appraisal document by using HRHAP_DOCUMENT_CREATE function module.
    There was a additional requirement that part appraisser details also need to be updated while the document is created.
    I am getting an error saying
    Maximum of 00 part appraisers allowed for template
    When i create the document  by using  transation PHAP_CREATE for the same template i am able to create part appraisers and there it says the maximum part appraisers is 14
    The more puzzling aspect is that when i try to add the part appraisers for the same document via HRHAP_DOCUMENT_MODIFY i am able to do so.
    Kindly let me know if i am missing something while creating the document.
    Any help is highly appreciated

    Hi
    You have, as far as i can determine without seeing the template,defined no Part Appraiser Column (PAPP) in your template. But you have defined a function on the template to automaticly default the part appraisers.
    On the Appraisal document persons (appraiser / appraisee) are getting defaulted as part-appraisers although no part appraisal column excist,and therefor 00 Part Appraisers are allowed. This gives the error. Remove the Part Appraisers default functionality from the template and this problem will be solved.
    FYI: The reason why this doesn't give a business check error is that the functions to default participants are BAdI's and we have no means of determining wether or not a BAdI implentation will create an inconsistency on the appraisal document.
    Also, the reason that it occurs as a S message and not as E or W is because of programming restrictions in combination with messages. All errors on the Appraisal Document will come as 'S' messages.

  • Error while creatting the Material Master IDOC in ERP 2005

    Hello All,
    I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
    I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
    The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
    After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
    On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
    Thanks for any kind of input.
    Regards,
    Rahul
    Message was edited by:
            Rahul Gavande

    Dear,
    Check ABAPer for file settings.
    - CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
    - CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
    - CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
    - CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
    - CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
    - CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
    Check Note: 70752.
    Regards,
    Syed Hussain.

Maybe you are looking for

  • Problem displaying WebHelp in firefox called from web application

    We're using RoboHelp 7.03. When the WebHelp is generated, it seems that the navigation topics all immediately begin with a few illegal characters. This isn't a problem in IE -- it ignores these characters and displays our help pages fine. In Firefox,

  • 3.5mm i/o jack (macbook pro 13" i7) splitter?

    So i just bought a macbook pro 13" (with the i7) and i was wondering if there's any way to split the input/output jack into two jacks (1 being input, 1 being output) because i use some guitar modulating softwares that require then guitar feed in from

  • Html in sql query

    hello experts; I have a query similar to this below create table tbl_test as select tp.id from select '180 main st' as ID from dual union all select '190 main st' as ID from dual ) tpI am trying to make the id field an hyperlink, so that when it is c

  • In what ways will Creative Cloud subscribers benefit from Adobe's purchase of Fotolia?

    I read an article linked below on Adobe's purchase of Fotolia and initially was excited.  But as I continued reading, I found that Fotolia is not planned to be a free service to Adobe Creative Cloud subscribers. Subscriber will have to pay for images

  • HR replication with twin backends

    Hi,    We have a system which is already went live, HR replication happens to the SRM system. There is a proposal that SRM system will be connected to another backend. Will have two backends connected to SRM system. They wanted to go for HR replicati