Error while creating a simple function, procedure or triger in Oracle8i Lite

Hi,
I have Oracle8i Lite release 4.0.
While creating a simple proceudre/function/trigger on the database, it's throwing the following error:
create or replace function test return number is
ERROR at line 1:
OCA-30021: error preparing/executing SQL statement
[POL-5228] syntax error
Here is my sample code.
create or replace function test return number is
begin
return 0;
end;
Tried to create the same function in the user SYSTEM too but got the same error message.
Thanks in advance for the soluton.
null

I just started with 8i Lite, but as far as I know 8i Lite does not support PL/SQL code.
So you have to write your triggers and stored procedures in Java.
Ciao

Similar Messages

Error while creating a simple trigger in Oracle8i Lite

Hi,
I have Oracle8i Lite release 4.0.
I want to create a simple trigger on 8i Lite.
first I created .java file and got the .class file after successful compilation.
The .class file is sitting in my local C:\ drive.
I have a table having only two columns in 8i Lite and the structure is
TABLE : SP
ACC_NO NUMBER,
ACC_DESC VARCHAR2(20)
Then I issued the command :
SQL> ALTER TABLE SP ATTACH JAVA SOURCE "JournalInst" in '.';
After that getting the following error :
alter table sp attach java source "JournalInst" in '.'
ERROR at line 1:
OCA-30021: error preparing/executing SQL statement
[POL-8028] error in calling a java method
Following is the cause/action for the error code :
POL-8028 Error in calling a Java method
Cause: Most commonly refers to a problem when converting between Java and Oracle Lite datatypes.
Action: Check the calling parameters.
I can't understand where I am wrong ?
Could anybody help me out ?
Here is my source code of .java file
import java.lang.*;
import java.sql.*;
class JournalInst {
public void INSERT_JOURNAL(Connection conn, double AccNo, String AccDesc)
System.out.println("Record Inserted for :"+AccNo +" "+AccDesc);
Thanks in advance for solutions.
Sarada
null

I just started with 8i Lite, but as far as I know 8i Lite does not support PL/SQL code.
So you have to write your triggers and stored procedures in Java.
Ciao

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

Error while creating Custom Defined Functions in Essbase

Hi All, I am trying to create CDF(Custom Defined Functions) in Essbase. Iwant to create a function which take list of child member andreturn the first child. For this, i have created a java file called"ChildAccess.java" which contains the following code: public class ChildAccess { public static char GetFirstMember(char [] members) { return members[0]; } } I have compiled and made jar file called"ChildAccess.jar" and pasted it at"ARBORPATH/java/udf". Then i restarted the Essbase Serverand run the following MaxL command to register the function create or replace function '@ChildAccess' as 'ChildAccess.GetFirstMember' spec '@ChildAccess(memberRange)' comment 'adds list of input members'. Till here i am not getting any error but when i am using thisfunction in my calc script as given below FIX(@ChildAccess(@CHILDREN("Abc"))) it gives the following error "Error:1200414 Error parsing formula for [FIX STATEMENT] (line 2)"argument[1] may not have size[6] in function[@CHILDREN]" NOTE: The SIZE[6] is giving the no. of child in member"ABC". Thanks in Advance Arpit

If you want to use the CDF in a FIX statement you need to make sure that it returns a member name rather than a number: public class ChildAccess { public static String GetFirstMember(String[] members) { return members[0]; } } I prefer to define the function against a specific application rather than globally because you only need to restart the application in order to pick-up any modifications to the .jar file. So the MaxL function definition would be: create or replace function appname.'@_GETFIRSTMEMBER' as 'ChildAccess.GetFirstMember(String[])'; and in the calculation script the FIX statement would become: fix ( @member( @_GetFirstMember( @name( @children( "Abc" ) ) ) ) ) This looks a little messy so you can use a macro to simplify it: create or replace macro appname.'@GETFIRSTMEMBER'(single) as '@member( @_GETFIRSTMEMBER( @name( @@1 ) ) )' SPEC "@GETFIRSTMEMBER(memberRange)"; and then the FIX statement could be written: fix( @getfirstmember( @children( "PRODUCT" ) ) )

Error while creating Notification: Partner Function is Not Allowed in Partner Determination Profile Q2

During Notification Creation I get the error --Partner Function is Not Allowed in Partner Determination Profile Q2
As I enter Purchase Document Number in the transaction QM01 and press Enter. I get the above error and donot go further.
Can anyone help me here.

Hello Prashant,
You are missing some configuration for the partner function;
Go- to
SPRO>IMG>QM>Quality Notifications>Notification Creation>Partners>Define partner Determination Procedure>
Again Select "Define Partner Determination Procedure".
Select Quality management> Change Partner
Now Select Q2.
Compare settings with Partner Determination Procedure on any other client. Also check Partner functions on the same screen.
Amol.

Error while creating universe on Stored Procedure

Hi All,
I am trying to create an Universe on stored Procedure, Ended up with the error message as in snapshot,Your help is Appreciated.

Hi
You cannot directly insert object in Stored Procedure universe,Whatever object you are using to define your derived table,you have to include all those objects into the universe first.
From the below image you can see that i have 3 derived tables ,but whatever objects i am trying to use all those i have inserted into the universe.
Try to build like this save and export.
Let me know if you face nay error

Error While Creating Block on Package Procedure

Hi
When I try to create a block on a package Procedure I get the following error
ifbld60.exe has generated errors and will be closed by Windows.
You will need to restart the program.
An Error log is being created,
and forms closes.
Is it something to do with Forms problem or with Windows? Is there a patch available for this problem or its a OS bug. The client I am testing this form from is Windows 2000 Professional.
Thanks for your help
Diogo

Hi
You cannot directly insert object in Stored Procedure universe,Whatever object you are using to define your derived table,you have to include all those objects into the universe first.
From the below image you can see that i have 3 derived tables ,but whatever objects i am trying to use all those i have inserted into the universe.
Try to build like this save and export.
Let me know if you face nay error

Getting a syntax error while creating the simple OData service.

Hi Folks,
That is what I typed in a in .xsodata file but it is giving me a syntax error..any idea why this can be?
Thank you for your help.
service namespace "sap.hana.test.service"
{ "SYS" , "AFL_AREAS_" as "TEST";

Hi,
I tried creating the same. I was able to activate all three files i.e. .xsapp,.xsaccess,*.xsodata. The three file contents are mentioned below. The data might not be displayed in the browser due to privileges issue as it is SYS table.
.xsapp contains
.xsaccess contains
"exposed" : true
*.xsodata contains
service
"SYS"."AFL_AREAS_" as "mytable";

Error while creating procedure and package

Hi,
I am getting an error while creating an procedure
create or replace procedure mke_test (mke_gender varchar2) is
begin
declare global temporary table mag_hotline_glob
INDIVIDUAL_ID NUMBER,
ONE_MONTH NUMBER,
THREE_MONTH NUMBER,
SIX_MONTH NUMBER,
TWELVE_MONTH NUMBER,
CHILDREN_PRES VARCHAR2(1 BYTE)
) with replace on commit preserve rows not logged;
begin
insert into mag_hotline_glob
select * from magazine_gender;
end;
end;
can anybody plz suggest

It's a total mess. You need to read the documentation first.
Create your table separately
CREATE global temporary table mag_hotline_glob(INDIVIDUAL_ID NUMBER,
                                            ONE_MONTH NUMBER,
                                            THREE_MONTH NUMBER,
                                            SIX_MONTH NUMBER,
                                            TWELVE_MONTH NUMBER,
                                            CHILDREN_PRES VARCHAR2(1 BYTE)) with replace on commit preserve rows not logged;Then use the procedure (I don't know why, this INSERT statement you can fire yourself)
create or replace procedure mke_test(mke_gender varchar2) is
begin
    insert into mag_hotline_glob
      select * from magazine_gender;
end;If you want to create the GTT inside the procedure(should be avoided) then Use EXECUTE IMMEDIATE.
By the way, where are you using the IN parameter ? It' unnecessary.

Error While Creating PAS Procedure

Dear Friends
I am getting following error while creating PAS procedure. I login using Admin
Access to Database Admin.EWK Denied by the Operating System
What might be the reason for this error?
Rgds
SriG

Hi SriG,
When you try to open a PAS procedure, it creates a temporary editor work file on the client system. This file is created in the directory referenced by the DBHOME variable in the client-side lsserver.ini file. If the user doesn't have permission to write to this directory then the application will be
unable to open any database sets. So make sure your O.S. user has full access to DBHOME.
Regards,
Isabel

Compilation error while creating procedure

Hi,
I am getting compilation error while creating procedure
CREATE OR REPLACE My_CHANGEDATE IS
error_string VARCHAR2(400) := NULL;
BEGIN
Create table set_temp as select * from set;
CURSOR c1 is
 SELECT a.SETNUM, b.CHANGEDATE from
 set a, setsp_t2 b
 where a.setnum = b.setnum
 and trunc(a.changedate) < trunc(b.CHANGEDATE);
BEGIN
 FOR rec IN c1 LOOP
 UPDATE set SET changedate = rec.changedate
 WHERE setnum = rec.setnum;
 Insert into set_temp select * from set where setnum = rec.setnum;
 END LOOP;
 EXCEPTION
 WHEN NO_DATA_FOUND THEN
 NULL;
 WHEN OTHERS THEN
 error_string := 'My_CHANGEDATE - '||SUBSTR(SQLERRM,1,350);
DBMS_OUTPUT.PUT_LINE(error_string);
 RAISE;
END My_CHANGEDATE;

I have taken your code and cleaned it up to be more readable. Please see the comments in the code.
CREATE OR REPLACE My_CHANGEDATE
IS
 error_string VARCHAR2(400) := NULL;
BEGIN
 /* The only way to issue DDL in a procedure is to either user
 * DBMS_SQL or EXECUTE IMMEDIATE. Creating objects is generally
 * not needed or recommended in frequently run code.
 Create table set_temp as select * from set;
 /* The cursor declarations need to go in the declaration section of the
 * procedure (between IS .. BEGIN).
 CURSOR c1 is
 SELECT a.SETNUM, b.CHANGEDATE from
 set a, setsp_t2 b
 where a.setnum = b.setnum
 and trunc(a.changedate) < trunc(b.CHANGEDATE);
 BEGIN /* Where is the END that goes with this begin? */
 /* Single record processing is generally not recommended. It is considered a "slow-by-slow" method. */
 FOR rec IN c1 LOOP
 UPDATE set SET changedate = rec.changedate
 WHERE setnum = rec.setnum;
 Insert into set_temp select * from set where setnum = rec.setnum;
 END LOOP;
EXCEPTION
 WHEN NO_DATA_FOUND THEN
 NULL;
 WHEN OTHERS THEN
 error_string := 'My_CHANGEDATE - '||SUBSTR(SQLERRM,1,350);
 DBMS_OUTPUT.PUT_LINE(error_string);
 RAISE;
END My_CHANGEDATE;My general recommendations are as follows:
1. Remove the CREATE TABLE from the procedure altogether.
2. Don't use reserved words for object names (e.g. SET)
3. Remove the record by record processing and consolidate it to a single UDPATE statement as follows (note untested):
UPDATE set s
SET changedate = (
 SELECT CHANGEDATE
 FROM SET A
 , SETSO_T2 B
 WHERE A.SETNUM = B.SETNUM
 AND S.SETNUM = A.SETNUM
 AND TRUNC(A.CHANGEDATE) < TRUNC(B.CHANGEDATE)
WHERE EXISTS(
 SELECT NULL
 FROM SET A
 WHERE A.SETNUM = S.SETNUM
 )HTH!

Error while creating new projects using api

Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Error while creating PDF object

We are using Adobe Interactive Forms with Guided Procedures. Netweaver 7.0 SP14 (Dual stack Java & Abap). All was working well it appears until we configured SSL for ADS - don't know for sure if this caused the problem but it is the only change we can identify around the time that our problems began.
When we attempt to Create an Impersonalized Form we receive the following error -
Cannot retrieve template structure: Execution ended in an unrecognized state
When we attempt to test a callable object associated with an interactive form we receive -
Error while creating PDF object: PDF object could not be created; object returned from ADS is null.
In both cases the entries in the default trace log are the same -
Service XMLFormService: Native process (PID=0) /usr/sap/UFD/DVEBMGS02/j2ee/os_libs/adssap/XMLFormService/bin/XMLForm.exe terminated abnormally with error code 134
PDF object could not be created; object returned from ADS is null
com.sap.caf.eu.gp.base.exception.EngineException: PDF object could not be created; object returned from ADS is null
at com.sap.caf.eu.gp.model.iforms.adapter.pdf.AdobePDFAdapter.createInstanceDocument(AdobePDFAdapter.java:542)
at com.sap.caf.eu.gp.model.iforms.preproc.FormPreprocessor.execute(FormPreprocessor.java:507)
Like I mentioned earlier this functionality was working successfully in our environment at one time.
Any guidance in this matter would be greatly appreciated.
Thanks,
Joe

Joe,
If you originally configured ADS without SSL, I would recommend going back through the ADS Configuration Guide for your NetWeaver stack and make sure all the necessary changes for SSL were made. I've seen another case where a step was missed in SSL configuration for ADS which caused a form to error.
If everything looks good based on your SSL configuration, I would recommend creating an OSS Note.
-Matt

Error while creating document numbering series via SDK add on

Dear Experts,
We receive the following error while creating the document numbering series through the SDK add on
[Microsoft][SQL Server Native Client 10.0][SQL Server]The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100.
From the above error message I can suspect the following possibilities
1. The limit for the document numbering must be less or equal to 2100.
2. There is a problem in the coding in SDK where it does not allow more than 2100 lines in the database.
We tried to create manually for the same fiscal year and period indicator disconnecting the add on, the same error occured.
Then we created a seried for a single document with the period indicator for the next fiscal year, it allowed.
After creating the document numbering for the next fiscal year, we were able to create the numbering for the previous year also.
Kindly help us on how to solve the same.
With regards,
Yeshwanth Prakash

Hi
You have, as far as i can determine without seeing the template,defined no Part Appraiser Column (PAPP) in your template. But you have defined a function on the template to automaticly default the part appraisers.
On the Appraisal document persons (appraiser / appraisee) are getting defaulted as part-appraisers although no part appraisal column excist,and therefor 00 Part Appraisers are allowed. This gives the error. Remove the Part Appraisers default functionality from the template and this problem will be solved.
FYI: The reason why this doesn't give a business check error is that the functions to default participants are BAdI's and we have no means of determining wether or not a BAdI implentation will create an inconsistency on the appraisal document.
Also, the reason that it occurs as a S message and not as E or W is because of programming restrictions in combination with messages. All errors on the Appraisal Document will come as 'S' messages.

Error while creating INFOPACKAGE to load transaction data

Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. 
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.

Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
 Function Module = CONVERSION_EXIT_CUNIT_INPUT
 Press F8 in order to execute
 This would be help a bit
3) corrected data from the flat file
 another alternative solution was by:
 handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ-

Error while creating a simple function, procedure or triger in Oracle8i Lite

Similar Messages

Maybe you are looking for