Error while creating customer master XD01
i have created own account group and assigned external number range when am creating customer in xd01 am getting error in partner tab the SP,SH,BP,PY the no is blank and when am trying to save its gives error document is incomplete the error Message no. F2643
Diagnosis
The account group of the current customer is not defined for the required partner usage.
where as when am assining internal number range its working fine kindly help
Thanx
Hi Mukesh
Please check the following again,
IMG > Logistic > SD > Basic functions > Partner determination > Customer master
Define the Partner functions. If you are defining new then specify the "PARTNER TYPE" for each Partner function.
- Define Account group. You can use existing one (0001-sod-to-party) or you can copy it or create new.
- Define your Partner determination procedure.
- Assign the required Partner functions (SP,SH,PY and BP are mandatory) to your Account group, so that they will be permitted for your Account group.
- Assign the "Partner functions" to your new "Procedure ". Here you specify which are "mandatory" and which are "not changeable".
- Assign the "Account group" to your new "Procedure".
Now, go to XD01,enter your Account group,External number,company code,Sale area and proceed.
If you are finding problem then,fill up all your data (general data, company code data), go to sales area data, fill up sales ,shipping and billing document tab and save it.
Next, go to XD02, sales area data >partner function tab, here fill up the places for respective Partner functions.
Similar Messages
-
Error while creating customer master data
dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
DebeshHi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM -
While creating customer master i am getting the Communication error
Hi experts,
while creating customer master i am getting the Communication error with the external tax system (VERTEX_MS0018) please tellme how to solve this issue
Regards,
Anil prasad
Edited by: prasadanil on Sep 16, 2011 12:52 PMhI Prasad,
It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
a) Behavior when you use Taxware: There is no message and data can be saved.
b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
Hope you will resolve the above issue with these inputs.
Let me know if you need any further details.
Ravi. -
"SYNTAX_ERROR" while creating customer Master T-code-"FD01
Dear All,
Getting an error "SYNTAX_ERROR" while creating customer Master T-code-"FD01". The error as follwoes
Short text :Syntax error in program "CMD_EI_API_CHECK==============CP ".
What happened? : Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CMD_EI_API_CHECK==============CP " in include
"CMD_EI_API_CHECK==============CM04T " in
line 82:
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
" convertible in a Unicode program. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCMD_BTE_OUTBOUND" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis :The following syntax error was found in the program
CMD_EI_API_CHECK==============CP :
""LS_KNVP_NEW_PARTIAL-PERNR" and "<LS_KNVP_NEW>-PERNR" are not mutually"
" convertible in a Unicode program. ."
Information on where terminated :Termination occurred in the ABAP program "SAPLCMD_BTE_OUTBOUND" - in
"CMD_CUSTOMER_BTE_1321_IMPL".
The main program was "SAPMF02D ".
In the source code you have the termination point in line 330
of the (Include) program "LCMD_BTE_OUTBOUNDU01".
Please help us on this,
Thanks in Advance,
Kumar.KDear Kumar,
please kindly apply the SAP note 1511101.
I hope this helps.
Mauri -
Ship to party is not available in account group while creating Customer Master
Hello All.
While creating customer master in account group there is no SH(ship to party) what is the purpose of it . I can see PY BP but not SH (XD01). We always use Sold to Party but i have seen Payer and Bill to party as well while creating customer master . Just got confused why we select such options when everything comes under sold to party.
I cannot see SH while creating customer for the first time is it necessary that SH should there while creating customer master.
RegardsHi ,,
please do assign ship to party to account group .
SPRO --> S&D --> BASIC FUNCTION --> PARTNER DETERMINATION--> SET UP PARTNER DETERMINATION --> FOR CUSTOMER MASTER -- > A/C GROUP - FUNCTION ASSIGNMENT
Here assign ship to party(sh) to your account group.
Now you will find sh in customer master.
If you want further clarification , please let me know.
Regards
Patchala. -
Hiding Reference Fields While creating Customer Master
Hi,
I want to Hide Reference fields While creating customer master, Thanks in advance
Thanks
seshuHello,
No need of screen exits or ABAPer.
You can easily do it with Transaction Variant using T-Code - SHD0 (SHD zero).
If you dont know how to create a Transaction Variant, just search the forum with Date Range "All" & you will get lot of guidence.
You will just need help of Basis person for removing end-user's authorization for XD01 & giving authorization for (e.g.) ZXD01
Hope this helps.
Thanks,
Jignesh Mehta -
Error while creating customer account sites from backend
I am creating Customer Account Sites using the TCA API from Toad.
I am getting the following error
The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
The Operating unit has been defined.
I am using the following code:
DECLARE
p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_cust_acct_site_id NUMBER;
BEGIN
p_cust_acct_site_rec.cust_account_id := 9462;
p_cust_acct_site_rec.party_site_id := 5473;
--p_cust_acct_site_rec.language := 'US';
p_cust_acct_site_rec.org_id := 126;
p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
hz_cust_account_site_v2pub.create_cust_acct_site(
'T',
p_cust_acct_site_rec,
x_cust_acct_site_id,
x_return_status,
x_msg_count,
x_msg_data);
dbms_output.put_line(SubStr('x_return_status =
'||x_return_status,1,255));
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
IF x_msg_count >1 THEN
FOR I IN 1..x_msg_count
LOOP
dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
FND_API.G_FALSE ), 1, 255));
END LOOP;
END IF;
END;
Thanks and Regards,
K tannaDuplicate post.
Error while creating customer account sites
Error while creating customer account sites -
Internal number not showing while creating customer master record
Dear All.
After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is not displaying. I have set number range internally.
Thanks..
CG Balaji> Dear All.
>
> After creation of account group and doing patner
> determination procedure, while creating customer
> master record it is showing all the 4 functions of
> partner in partner function tab page but the internal
> number is not displaying. I have set number range
> internally.
>
> Thanks..
>
> CG Balaji
Hi,
In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
This will allow taking INTERNAL numbers during customer creation.
Thanks and reward points if useful -
Send SMS while creating Customer Master Record using XD01?
Hi Experts,
We have a requirement that " Send SMS from XD01 (customer Master)". Send SMS to customer's mobile after successfully creating customer master record by pressing SAVE button in XD01 tcode.
Successfully, sending SMS through the ABAP program.
How to send SMS from XD01 tcode? I tried using USER-EXIT "SAPMF02D", but it is not sending and giving error message. If I send through the program, it is sending and working fine.
Whether I have to use Work Flows or any other solutions?
Please help me out.
thanks in advance.
Regards
Saray.Hi,
Can you please paste your code here?
Also check BADI CUSTOMER_ADD_DATA in se18.
Regards,
Amit -
Dump while creating customer master data
Hi,
I am trying to create customer master record using XD01. I am getting express document error:
"Acct group Sold-to party uses ext. no. assignment. Specify an account number"
I have maintained the external number range from 000000... to ZZZZZZ.... and have also maintained account group.
Below are the error details:
"MESSAGE_TYPE_X" " "
"SAPLSZA0" or "LSZA0U47"
"ADDR_SAVE_INTERN"
Source Code Extract
Line
SourceCde
523
call function 'TR_WRITE_LOG'
524
exporting
525
iv_log_type = 'FILE'
526
iv_logname_file = lv_logfile
527
IV_LOGNAME_DB =
528
iv_logname_memory = lv_protfile
529
iv_append_mode = prot_append_mode
530
iv_condense = ' '
531
tables
532
it_msgs = msg_tab
533
exceptions
534
invalid_input = 1
535
file_access_error = 2
536
db_access_error = 3
537
others = 4
538
539
if sy-subrc <> 0.
540
message id sy-msgid type sy-msgty number sy-msgno
541
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
542
endif.
543
544
545
message x842 with '&1' raising database_error.
546
547
endif.
548
Ende Fangschaltung -
549
*xxxi-
550
END-OF-DEFINITION.
551
552
>>>>>
write_to_db adrc .
554
WRITE_TO_DB ADRCT . "*912d
555
DELETE adrct FROM TABLE adrct_d. "*912i
556
IF sy-subrc <> 0. "*912i
557
MESSAGE a840 WITH 'ADRCT' RAISING database_error. "*912i
558
ENDIF. "*912i
559
UPDATE adrct FROM TABLE adrct_u. "*912i
560
IF sy-subrc <> 0. "*912i
561
MESSAGE a841 WITH 'ADRCT' RAISING database_error. "*912i
562
ENDIF. "*912i
563
MODIFY adrct FROM TABLE adrct_i. "*912i
564
IF sy-subrc <> 0. "*912i
565
MESSAGE a842 WITH 'ADRCT' RAISING database_error. "*912i
566
ENDIF. "*912i
567
write_to_db adrp .
568
write_to_db adcp .
569
write_to_db adrt .
570
write_to_db adr2 .
571
write_to_db adr3 .
572
write_to_db adr4 .
I will reward all the helpful answers.
Thanks,
Mohit.Hi Farhan,
All the info you need is available in note 956054. This contains info on the customizing settings, etc.
The role that you need to maintain is also a part of the customizing setup that is covered within the note.
Hope this helps you.
Cheers,
Rishu. -
While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
error I am getting are
1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.The error is occuring because Oracle is trying to validate/set a DFF.
Check the DFF attached to the customer entity, address entity or site use entity.
Especially look at the value sets attached to the DFF.
Look at the value set definition and the default value for the field.
Hope this helps,
Sandeep Gandhi -
Error While Creating Grant Master
Hi,
I am getting the error while creating the Grant Master.Kindly Help me
The Error Messages:
The special grant NOT RELEVANT (dummy grant) is automatically created(Message no. GMMASTERDATA111)
Cannot get grant defaults for sponsor 0000600000(Message no. GMMASTERDATA037)
Sponsor 0000600000 does not permit grant type 01(Message no. GMMASTERDATA036)
Duplicate grant number (Message no. GMMASTERDATA031)
Thanks
KishoreHi
go to OMWD : group together Valuation area like Plant and Company code.
Also Check OMS2 to update qty and value at plant level
check Enterprise assignment has been done properly..
hope that helps ..
thanks
mk -
Runtime error while creating material master data
hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION... -
Error While Creating Asset Master in AS01
Hi,
While creating Asset Master in AS01,I am getting the below error.
E003 SYST: Period 000 is not valid in financial year variant
I am using the standard Fiscal year variant V3
Kindly help me to fix this issue
Thanks
KishoreHi
GO to the transaction code OBY6 , double clcik on company code and see have you asigned the fiscal year variant to company code
Kindly revert in case of any query
regards
roobal -
Prob While Creating Customer Master - Error Msg "Number '0' Not defined"
Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.
Maybe you are looking for
-
Windows 8.1 enterprise 64 bit hyper-v
I have core i5 hp pro book 4540s and I am running win 8.1 enterprise edition When I enable my hyper-v from windows features , on upon restart It does not load back, and the circle of windows loading revolve hour and hours
-
??AAR is running & can't be used to view PDF files in a web browser
I sure hope someone can explain what this means because I'm at a total loss. I've been trying to print a priority postage label for the last 30 minutes and I keep getting this msg...."The Adobe Acrobat Reader that is running can not be used to view
-
RMI Hello Example under Windows
I'm trying out the Sun RMI Hello World example to find out more about RMI http://java.sun.com/j2se/1.5.0/docs/guide/rmi/hello/hello-world.html I'm using JDK1.6, under WinXP. I've compiled the classes, then tried to run the Server using start java exa
-
Can some1 help us and tell me where im going wrong ??? public static void main (String args[]){ int twoD[][] = new int[5][]; twoD[0] = new int[1]; twoD[1] = new int[2]; twoD[2] = new int[3]; twoD[3] = new int
-
HT203167 downloaded song won't play
I downloaded a song but I can't play it on my IPhone 4S