Error while creating Intercompany Invoice

Hi All,
Below is my scenario:
Ordering Sales Org (in US) : LRDS (Under company code LRDC)
Supplying Sales Org (in CN) : LRMS (Under company code LRMC)
Supplying Plant LRMP (in CN under c.c LRMC) directly supplies material to an end cutomer in US. The sales order is created in US with sales area LRDS/30/99 and the delivering plant will be LRMP in the sales order (I have not changed this manually. This is determined based on the CMIR).
After creating the sales order and delivery, end customer invoice is created. Then if I try to create the intercompany invoice, getting the below error.
"0080000024 000000 Sales organization is not defined".
I have created an internal customer and assigned it to the sales org LRDS in OVX5. I have extended the internal customer in sales areas LRDS/30/99 (sales area in which the sales order is created) and LRMS/90/99 (sales area in which the intercompany billing should happen).
1. Assigning the order type OR to IV is done.
2. Assign Org units by plant: I have assigned LRMP to LRDS/30/99 both in intercompany settings and in Sales and Distribution.
Can some one suggest me what could have gone wrong?
Thanks in advance.
Regards,
Raghav

Hi,
The INTERCOMPANY CUSTOMER should be created in the Receiving Sales area and must be assigned to the Orderting Sales organisation .
Please check this setting and also let me know the message if it does not solve your issue.
regards,
santosh

Similar Messages

Error while creating Excise Invoice

Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
Chowdary

Dear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi

8I 681 Error While Creating Excise Invoice

Dear All,
Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice.
Our client wants item level milestone,so in oder to activate that i have assigned the billing plan in the item category.But when i assighn the billing plan the system will not allow to put the billing relavance delivery relavant.So i made oder relavan in the billing relavance.So i create an oder and with that reference delivery.But when i create billing i have to refer the oder number,since in the item ctegory i have made oder relavant billing.So the result is in the billing document flow the delivery document is not flowing.Henceforth i could not be able to create J1IN.
But this was not happening in the sand box,but only in the quality since it is superior.when we debugged we found only J(Delivery) is allowed to create excise invoice.
Please help me to solve this issue,is there any possiblity to make the delivery document flow in the billing document.If it is done it 100%possible to create the excise invoice.
Please share your ideas to solve this issue.....
Best Regards,
Venugopal

Dear Lakshmi,
Thanks for your Prompt reply...
In our case delivery is there,but when we create the invoice the delivery document is not flowing,since in the itemcategory oder relavant billing.We have billing milestone at the item level,for activating that i have to make the billing relavance as I.Other wise the system is not allowing me to select delivery relavant and billing plan.Please help me to make the delivery document flow in the billing document.Then this 8I error will be solved.
I have alsochecked the update document flow,everything is perfect.
Regards,
Venugopal

Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

Dear All,
While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
"Error updating table J_1IEXCHDR"
Message no. 8I308
Suggest me asap,.
Thanks & Regards,
Radhika

Hi Radha,
Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV Update all the gl accounts in the table.
Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
Credit -- CENVAT Suspence
Cr         RG23 AT1
Cr         RG23 BED,RG 23 ECS,
Dr         CENVAT Clearing
Dr         PLA BED, PLA AED, PLA SED
Dr         RG23 AED, BED, SED
Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
Thanks,
padmaja

Error while creating vendor invoice by FB60 Urgent!!!!!!!!!!

While creating an vendor invoice by FB60 . the system is giving me an error message that this account cannot be directly posted to. Its an recon . Account. The user wants me to set it temporarily for some invoices and set back the GL account later on. Could anyon esuggest me. Its urgent please.
Thanks in Advance.

hi kavitha ,
the acct 12501550 which is advance payments is an accrual acct which is not a recon a/c
check the gl seetings
in Type and Description tab
make sure its a balance sheet acc
in Control tab
remove the recon. account for acct type , i.e., leave the field blank
generally , the line item display is clicked and sort key are filled.
in Create/bank/interest Tab
check the appropriate FSG and make sure to uncheck the post automatically field.
and try to post it after the changes, it shoud work.
regards
Jay

ABAP short dump error while creating an invoice

Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
Manjunath

Hi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna

Error while creating excise invoice J1IIN

Hi all,
I am into an implementation project where I am configuring CIN for Factory sale with Excise. I have gone through all the setting and done it according to the documents available. But while creating out going excise invoice (J1IIN) system giving an error "Customization for sub transaction type is missing in table excise accounts". I dont want to use a sub transaction type as there is not much variation in scenario here. However I created a new sub transaction type (SPROLogistic genTax on goods mov-Indiabasic settingmaintain sub transaction type) and assigned it Transaction type (SPROLogistic genTax on goods mov-IndiaAC determination-specify excise account per excise transaction) and G/L (SPROLogistic genTax on goods mov-IndiaAC determination-specify G/L ac per excise transaction). But still the same problem is keep coming. Also I have tried making this sub transaction type as default (SPROLogistic genTax on goods mov-Indiabusiness transaction outgoing excise invoice--- maintain default excise grp and series grp). but the issue remains unresolved.
More over while doing J1IIN i have also tried selecting the sub transaction type from drop down list but the list is empty and the massage displayed is "No values found"
kindly help,
BKR

Hi,
Yes I hv already maintained the sub transaction type for Excise TT DLFC (goods removal through sales). the entries what i maintained is as given below
DLFC          Credit     PLA AED account
DLFC          Credit     PLA BED account
DLFC          Credit     PLA cess account
DLFC          Credit     PLA SED account
DLFC          Credit     RG 23 AED account
DLFC          Credit     RG 23 BED account
DLFC          Credit     RG 23 SED account
DLFC          Debit     CENVAT suspense account
DLFC     10     Credit     PLA AED account
DLFC     10     Credit     PLA BED account
DLFC     10     Credit     PLA cess account
DLFC     10     Credit     PLA SED account
DLFC     10     Credit     RG 23 AED account
DLFC     10     Credit     RG 23 BED account
DLFC     10     Credit     RG 23 SED account
DLFC     10     Debit     CENVAT suspense account
Here "10" is my sub transaction type. I have maintained DLFC with and without sub transaction type for each account name. But that did not resolved the issue. More over is it mandatory to give a sub transaction type? Is there any way so that I can continue without sub transactions?

Syntax error while creating a invoice

Hi I am new to this forum hope u guys can help me out,
I am ruuning following syntax for creating an invoice and for this error message is coming which is given below.
Select aadrnr astdc1 b~name1 into table inv_head1
From kna1 as a inner join adrc as b on aadrnr = baddrnumber.
Unknown column name "A~STDC1" . field list. . field list. field list.

Hi Rupesh,
u have to mention as " select ... into corresponding fields of
table ... ".
regards
Chaitanya.

Error while creating an Invoice in SRM

Hi All,
We are on SRM 7.0, ECC 6.0 (Classic scenario).
My SC has been approved and a PO has been created in ECC, I have also created a confirmation against this from SRM which resulted in a GR being created against the PO in ECC.
Now when I am creating an Invoice from SRM, I get the following error messages
1. Please enter tax amount
2. "Term of payment does not exist in target system".
Pl let me know where I need to maintain the payment terms in ECC and do I need to replicate it on SRM side?
Regards

Hi Sivakumar,
I am also facing same issue in my current project. Can you please tell me how you resolved the issue.
Thanks for advance helping to resolve the issue.
Regards,
Pijush

Error while creating AR Invoice from Sales order

Hi All,
I have created a sales order ,when i try to create AR Invoice through Copy To option i am getting an error
Business partner of copied down payment document must be the same as business partner of target document
Please help me to solve this issue
Thanks in Advance
Regards
Arun

Hi Arun,
Check if you have Down payment AR Invoice created from this Sales order.
Thanks,
Gordon

Error while creating excise invoice to return Delivery (J1IS)

Dear all,
Plz help to solve this problem.
After MIGO. I have done return delivery to vendor(Movt-122).
With ref to the return delivery doc I am trying to create excise invoice to send to vendor in J1IS.
but error appears as Vendor not related to material documents.
Thanks & Regards
Sanjay Larokar

Hi Sanjay,
Apply Below Notes
1042131     Vendor displayed as incorrect in J1IS if no leading zeros
1025204     Vendor not recognized in J1IS and error 076 displayed
1008100     Error "Vendor not related to Material doc" displayed in J1IS
1003491     Vendor not recognized in J1IS and error 076 displayed
960564     Vendor code truncated in J1IS resulting in Error 8I 786
Cheers...
Santosh

Getting error while creating Customer Invoice Request via Web Service

Hello,
I am trying to create customer invoice request via web service.
But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
It is working fine in reference tenant. But using the same payload its giving error in another tenant.
Can you please tell me what is the root cause for this error?
I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
Thanks and Regards,
Sriram

Hi,
Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
Regards,
Sunitha

Error while creating excise invoice for no bond

Hi,
Iam creating export excise invoice which is related to NO BOND, while saving the document iam getting the error "No account is specified in item 0000000001" in diagnosis iam getting "No account was specified for account type "S" in item "0000000001" of the FI/CO document.".
Kindly suggest me how to solve this issue.
Thanks in advance
V S Kumar

hi
check u r pricing procedure
whether g/l accounts assigned and also check u r revenu account determiantion settings
try to read the above said OSS notes
this error comes because
Item nnnnnnnn is the item number assigned by accounting.
When a billing document is transferred, a G/L account (account type 'S') is
missing for this item.
The problem is caused by incorrect Customizing in account determination:
the access of the G/L account via a condition table of account
determination is successful, however, in the corresponding table, no G/L
account is stored!
The account assignment analysis shows (for example).:
PR00 price 120 G/L account determined from account assignment type
KOFI
Solution
Use the account assignment analysis to check account assignment in the
billing document.
For the corresponding condition table of account assignment, maintain the
missing G/L accounts.
regards

Error while creating Excise invoice in J1iA

Hi
While trying to create an excise invoice using J1iA, the system gves an error message "material type 000000000500852 does not match with master".
Note that the number 500852 is one of the materials in the PO.
Why this error and how to reolve it?
Please help.
Regards
Madhu

Hi,
Check the material type for Excise master data in T_code J1ID.This will be in Material and chapter ID combination.
Also for the same material if it is export then see the Foreign trade export data and see the details maintained in Excise Data.
If it is import material then See the Foreign trade Import data.
All the above data should match.
Hope this will help you.
regards,
Goraksh.

Error while Creating ar invoice

hi
when i was creating a ar invoice by copying from delivery i got an error msg from sap software as sapbussinessone_20070821154722.dmp file has created.
can any one can help in this regard
firstly what is that error means and what that .dmp file means
thanks in advance
regards
praveen

a dmp file is a file created on the workstation that captures system and applicagtion information at the time the error occured. This file can be found in the C:\?????\SAP\SAP Business One\Logdirectory\ folder. Yhis file should be attached to the SAP support request that you create with SAP
dan

Error while creating Intercompany Invoice

Similar Messages

Maybe you are looking for