Error while creating Notification: Partner Function is Not Allowed in Partner Determination Profile Q2

During Notification Creation I get the error --Partner Function is Not Allowed in Partner Determination Profile Q2
As I enter Purchase Document Number in the transaction QM01 and press Enter. I get the above error and donot go further.
Can anyone help me here.

Hello Prashant,
You are missing some configuration for the partner function;
Go- to
SPRO>IMG>QM>Quality Notifications>Notification Creation>Partners>Define partner Determination Procedure>
Again Select "Define Partner Determination Procedure".
Select Quality management> Change Partner
Now Select Q2.
Compare settings with Partner Determination Procedure on any other client. Also check Partner functions on the same screen.
Amol.

Similar Messages

Error while creating a simple function, procedure or triger in Oracle8i Lite

Hi,
I have Oracle8i Lite release 4.0.
While creating a simple proceudre/function/trigger on the database, it's throwing the following error:
create or replace function test return number is
ERROR at line 1:
OCA-30021: error preparing/executing SQL statement
[POL-5228] syntax error
Here is my sample code.
create or replace function test return number is
begin
return 0;
end;
Tried to create the same function in the user SYSTEM too but got the same error message.
Thanks in advance for the soluton.
null

I just started with 8i Lite, but as far as I know 8i Lite does not support PL/SQL code.
So you have to write your triggers and stored procedures in Java.
Ciao

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

Error while creating PO -- Unit of measure not defined for lanuage ZH

Hi all,
i have created the PR with EA as UOM. Then while creating PO, i am getting error like
' Unit of measure not defined for lanuage ZH' .
Then I execute CUNI
Then menu is GOTO > Translation > units of measure
enter source language and target language . After this i am getting the below message
---> Language not available on server
Please suggest what i should do. Thanks.
Thanks
pabi

HI Pabi,
Go to material master for material in purchase requisition, the Go to Additional data and maintained language as ZH in material master data.
Also the other possibility, that if in your case purchase requisition are converted to purchase orders through background jobs,
then check the background job execution in SM37 whether that background job has been triggered twice parellely in the background, which could have resulted in locking of same purchase requisition at same time and hence your are getting the Error.
Br,
Tushar

Error while creating Custom Defined Functions in Essbase

Hi All, I am trying to create CDF(Custom Defined Functions) in Essbase. Iwant to create a function which take list of child member andreturn the first child. For this, i have created a java file called"ChildAccess.java" which contains the following code: public class ChildAccess { public static char GetFirstMember(char [] members) { return members[0]; } } I have compiled and made jar file called"ChildAccess.jar" and pasted it at"ARBORPATH/java/udf". Then i restarted the Essbase Serverand run the following MaxL command to register the function create or replace function '@ChildAccess' as 'ChildAccess.GetFirstMember' spec '@ChildAccess(memberRange)' comment 'adds list of input members'. Till here i am not getting any error but when i am using thisfunction in my calc script as given below FIX(@ChildAccess(@CHILDREN("Abc"))) it gives the following error "Error:1200414 Error parsing formula for [FIX STATEMENT] (line 2)"argument[1] may not have size[6] in function[@CHILDREN]" NOTE: The SIZE[6] is giving the no. of child in member"ABC". Thanks in Advance Arpit

If you want to use the CDF in a FIX statement you need to make sure that it returns a member name rather than a number: public class ChildAccess { public static String GetFirstMember(String[] members) { return members[0]; } } I prefer to define the function against a specific application rather than globally because you only need to restart the application in order to pick-up any modifications to the .jar file. So the MaxL function definition would be: create or replace function appname.'@_GETFIRSTMEMBER' as 'ChildAccess.GetFirstMember(String[])'; and in the calculation script the FIX statement would become: fix ( @member( @_GetFirstMember( @name( @children( "Abc" ) ) ) ) ) This looks a little messy so you can use a macro to simplify it: create or replace macro appname.'@GETFIRSTMEMBER'(single) as '@member( @_GETFIRSTMEMBER( @name( @@1 ) ) )' SPEC "@GETFIRSTMEMBER(memberRange)"; and then the FIX statement could be written: fix( @getfirstmember( @children( "PRODUCT" ) ) )

"Sales area is not defined" error while creating IBD

Hi All,
We are getting the below error while creating IBD:
Sales area    is not defined
No inbound delivery created for the replenishment delivery 0089799561
We are trying to create IBD from OBD.
We have the Z output type ZPED, which is basically same functionality as SPED.
When we trigger the ZPED in OBD, an idoc will be triggered and IBD will be created automatically.
Here in this case, we are getting the error when ZPED is triggered and we are seeing this error from the processing log of that output.
Below is the details of the processing log of failed ZPED:
Object 0089799561
   Output type: Stk.Transf.CrteDeliv
   Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATI
   Sales area    is not defined
   No inbound delivery created for the replenishment delivery 0089799561
ZPED is triggered by a batch job in the system but when we are trying to manually trigger it, it got successful.
Please suggest what can be the root cause of it.

First of all, please avoid using abbreviated words which is not encouraged here. Second, what is the Business process that warrants you to create inbound delivery against outbound delivery. Whenever you post here and expect assistance from members, please ensure you provide maximum details with regard to business process and what you had configured so that it will be easy for others to understand.
G. Lakshmipathi

Source sys Restore "error while creating table EDISEGMENT "

Dear All,
I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
We have done all BW refresh steps as per guide and during Restore of source system we
are getting errors during datasource activation as " error while creating table EDISEGMENT ".
we have checked RFC and Partner profiles and working fine.
We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
source system we are getting above mentioned error.
We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
those apply to our OLTP system , as one source system from same OLTP system got
successfully activated and source system for other client giving this issue .
Please help us out with this problem.
we are running on BI 7.0 platform and ECC 6.0 for source.
Regards,
Rr

check the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
hope this helps
regards
santosh

IDOC Error - Function module not allowed: IDOC_INPUT_HRMD

Hello Gurus,
I have an issue with the IDOC Transfer. I am using the program RSEINB00 to read the file and convert the data into IDOCs with status 64.
But all my Idocs are getting created with status 51 and the error is getting populated as " Function module not allowed: IDOC_INPUT_HRMD ".
Please do let me know whats needs to be done for this to be rectified.
Thanks,
Naveen.

You are not using the right process code.
In partner profile - in message type
u will see the process code to which a function module is attached,
for ur message type, this is not the right function module.
Regards
Manu

*Error while creating Trave Requset through ESS*

Hi,
We are getting following error while creating request through ESS:
Entry not found in table T706V. Argument: 40P IN 0010120090608
The estimated travel amounts could not be determined
Errors have been discovered when checking the Expense Report. Please correct them in order to proceed.
Whereas we have already maintained entries in the same table.
Please reply urgently...
Thanks
Neha

Hello,
The solution is documented in Travel Wiki:
https://wiki.sdn.sap.com/wiki/display/ERPHCM/Entrynotfoundintable+T706V
Regards,
Raynard
Edited by: Raynard Coscolluela on May 8, 2009 10:53 AM

Function key not allowed error??

Hi i have a member form which has text items and radio buttons corresponding to their details. I have a button where the user clicks and the button displays an LOV of members. When i select a member, after pressing ok on the button i get an error message saying:
FRM-41009: FUNCTION KEY NOT ALLOWED. PRESS CTRL+F1 FOR LIST OF VALID KEYS.
can someone tell me why this is occuring after i have selected a record from my LOV and pressed OK?? What should do to resolve this??

You'd better have a text item (lets its name be my_text_item) that have a button (named SEARCH_MEMBER_LOV_BUTTON). you want to click on button and a LOV (named SEARCH_MEMBER_LOV)displays. you select a member from the list whose value come in the my_text_item.
Double-click on my_text_item for property palatte. scroll down to List of Values LOV section. here you will see List of Values property. to assign the LOV select SEARCH_MEMBER_LOV from the list of values.
That all!

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while creating Business partner

Hello,
I am getting an error while creating a role in Business Partner (T.code BP). The error is given below:
Role 'contract partner' in IS-U not same as role from FS
Message no. E9450
Diagnosis
In IS-U or IS-T, you are not permitted to allocate the role Contract Partner and a role from Financial Services (role category begins with 'FL' or 'TR') to a business partner. This is due a conflict with regard to the corresponding customers
Procedure
Create another business partner as a duplicate.
Please assist.
Thanks & Regards,
Vineet

Hi,
The error prompts you that you can not create a business partner in financial roles (TR*, FL*) where a role of contract partner is already assigned to same partner.
Please refer SAP Note - 1123452 and 1564107.
Regards
Prasad AV

SLG1 error while creating Business Partner

Hi,
Im currently working on SRM 7.0 and keep receiving the following errors in SLG1. Can you kindly advise what might be the root cause for the below errors so ican fix the issue and ensure the same error doesnt pop up going further?
Error type 1:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXX
The region 00 is not defined for country DE
Error type 2:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
The transport zone ZOC0000001 is not defined for country YY
Error type 3:
Error:Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
Email address "whatever email" is invalid
Appreciate your feedback
Akshay

Hello Akshay,
Resolution for Isuue 1:
SAP Web Application Server -> General Settings -> Set Countries -> Insert Regions or Define Country Codes
Region for country DE is not maintained in SPRO or bad data.
Resolution for Issue 2:
SAP Web Application Server - Application Server - Basis Services - Address Management - Maintain Transport Zones
Maintain the transport zones in SRM.
Resolution for Issue 3:
email address should be a valid address. SRM checks the format e.g. xx @ yy . zzz
I believe error could be due to incorrect data.
Hope this solves.
Ashutosh

Legal Error: Partner Function Mapping not Maintained

Hello SD Gurus,
When i create a order and save, i get this pop-up (but i can save the order if i click ok)...
the pop-up is:
Legal Error: Partner Function Mapping not Maintained
Can someone explain why is this appearing and how to correct this?
Thanks in advance,
Regards
Jag

Hi
Go to transaction VOPA and maintain partner determination
In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
Hope this helps
Cheers
N Ganesh

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Error while creating Notification: Partner Function is Not Allowed in Partner Determination Profile Q2

Similar Messages

Maybe you are looking for