Error while Creating PO from Purchase Requistion in Third Party  Sales

Dear Team,
                      While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order.  Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
Thanks,
Farhan.

Dear Farhan,
1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
Double-Click on to Field Status Group (as noted down from in Step 1).
From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
Best Regards,
Amit

Similar Messages

  • How to configure purchase requistion in third party sale pls send me detail

    dear expert
    how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
    vicky

    you can find the details in the below links
    Re: THird party sales complete scenario
    http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
    http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
    Regards

  • How Billing doc.created from purchase invoice in Third Party Sale

    Hi All
    Our client requirement  has been mapped as sap third party sales process .
    But if the vendor is delivering less qty .  than the qty. for which Sales ordered  has been  created, How to create the  Sales billing Doc.  according to the purchase invoice so that Sales Billing  Doc. should be created for the delivered qty. only .
    Please suggest the configuration  & how the data is flowing from the Purchase Invoice to the Sales Invoice.
    Thanks in advance
    Ashok

    Hi
    you can achieve your requirement by following
    T-Code  VTFA (copy control Order to Billing)
    use you Third party order type and billing type
    Go to Item category (if Standard use TAS)
    there is a option "BILLING QUANTITY"
    user there "E" Goods receipt quantity less invoiced quantity"
    Hope it will solve your problem
    Cheers
    Shambhu Sarkar

  • Problem created during cretion of purchase requistion in third party sales

    entry does not exist in T024E- check your entry....
                                  pls solve it

    Hi,
    It seems there is some customization missing in table T024.
    For checking the same , Goto Txn -> SM31, Enter Table Name -> T024, Select -> Customization.
    Check with the table entries and maintain the missinf entry based on the Key Parameters.
    Reward points if this helps.
    Regards,
    Harsh

  • Error while creating subsite from site template

    Hi,
    I am getting below error while creating subsite from existing site template .
    Sachin Bhosale

    There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
    to the following blog post for more information
    http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
    http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
    Cheers,

  • Error while creating DTP from DS to Infoobject

    Dear All,
    I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
    Issue:Enter a valid value
    Msg No:00002
    Procedure: Display the allowed values withF4 and correct your entry,
    Regards,
    Satya

    Hi Satya,
    Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
    I don't find any specific problem or any patch problem with the error you are getting.
    Hope it helps !
    Regards,
    Rose.

  • Password Violation error while creating users from Admin interface

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

    Guys,
    The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
    Current System:
    1. I have configured TAM Pass-Thru authentication for End User Login Application.
    2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
    3. I have custom password policies configured for different orgainizatoions
    Problem:
    1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
    2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
    Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
    Appreciate your help!!!
    Thanks
    Vijay

  • Error while creating datasource from table MBEWH

    Hi all,
    I am facing an error message while creating datasource from table MBEWH
    "Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
    Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
    thanks and regards.

    Hi Zakir,
          This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources  directly.. for that you need  to go with CTBW  ( tcode )  and   create  one datasource...
       so, you need to check that   related table also.. for that  MBEWH table..
        ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE  AUSP table also.. liek this..
    regards
    @jay

  • Error while creating datasource from view ZBSIS_VIEW

    Hi all,
    I could not create  the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
    "Invalid extract structure template ZBSIS_VIEW of DataSource"
    Can anyone help on this regard.
    thanks.

    Hi,
    Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
    In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

  • Getting error while creating table from one database to other.

    Hi,
    We are getting below error while creating the table from one database to other.
    SQL> create table fnd_lobs parallel compress as select * from [email protected];
    create table fnd_lobs parallel compress as select * from [email protected]
    ERROR at line 1:
    ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
    too small
    ORA-02063: preceding line from EEXIT2TEST
    ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
    too small
    ORA-02063: preceding line from EEXIT2TEST
    ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
    too small
    ORA-02063: preceding line from EEXIT2TEST
    ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
    too small
    Regards,
    Bhatia

    hi
    what are the apps version local and remote database???
    Snapshot too old errors occur because Oracle can 't reconstruct a consistent
    image of a block for the purposes of a consistent read.
    I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
    increase roll back segments size and select again then
    the following metalink notes might be helpful
    ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
    How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
    OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1

  • ORA-12571 error while creating packages from Windows clients

    Hello,
    We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
    However, there are
    1. no errors in connecting and creating transactions from a Sql session
    2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
    3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
    This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
    Can somebody help me resolve this issue. Any Help would be greatly appreciated.
    Regards.
    Lakshmanan, K

    Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
    I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
    Ben

  • Budget error while creating delivery from sales order

    hi Gurus,
    System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
    I am picking material from unrestricted plant stock (not in project stock).
    I am also confused as sales order has 3 line items & error shows Item 004 !

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Error while creating table from csv file

    I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
    ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
    Any idea?

    I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
    ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
    Any idea?

  • Purchase Requestion  for Third Party Sales Order

    Hello Team
    I want the system to create Purchase Requisition automatically and some times Manually (Possible if both Option are available) for the Sales Order which belongs to Third Party.
    How to achieve this?
    Thanks
    Nick

    Hi Nick
    Following are the steps of third party:
    1) Creation of third party sales order
    2) Generation of automatic purchase reqisition through the configuration of schedule line CS in SD.(schedule line is determined by the item categoty and the mrp type.
    please dont maintain mrp type in the material master.so that it will determin CS directly.
    in the tcode VOV6,please check whether the document type NB is maintained for CS.
    This will created auto PR).
    3) You can check the PR Number in the schedule line tab of sales order.PR requirement will not be available in the MD04.
    4) Manually create a PO for vendor with item category S.
    5) There will be no GR in this case.
    6) Create an invoice verification document.
    7) Create an invoice from the SD side w.r.t Sales order.
    Hope this might have answered ur question
    Reward if useful
    Shawn

  • Error while creating Frame work Purchase order

    Hi Gurus,
    We are trying to implement Frame work order process with following configurations.
    1)Item cat  B for acc assingment Y
    2)Allow  item catg B with acc *** K and Y.(How to config this in SPRO)
    So when i am creating a PO adopted through Purchase Req (account ***  K and item cat B) i am getting error message "Pricing Error :Mandatory condition NAVS is Missing".So how do i configure this pricing process.
    Also when i am creating a Frame work order do i need to select the document type both in PO and PR as frame work order or NB order type will work with these config of Item cat B and acc *** Y?
    When i am creating a PR or PO with doc type frame work order the order unit is automatically populating as "AU" is this something std or do i have to do anything in configuration?
    When i created a PO with ref to PR aith account *** K into the PO and add the item category B the charging information was not maintained so how to maintian this?
    How to maintain the accounting info from PR?
    Also if there is a complete process link releated to config of frame work order that will be great.
    Thanks in Advance.

    Hi
    We are trying to implement Frame work order process with following configurations.
    Item cat B for acc assingment Y
    Create new acct assignment category in IMG -MM - Purchasing -Account Assignment - Maintain Account Assignment Categories (If you are sure of fields to be used then you can directly create Y, if not then copy existing category say K to new one and choose required fields)
    Allow item catg B with acc *** K and Y.(How to config this in SPRO)
    In Purchasing - account assignment - Define Combination of Item Categories/Account Assignment Categories - set combination for Y and B.
    Hope your documement types (PO & PR) allows item category B.
    So when i am creating a PO adopted through Purchase Req (account *** K and item cat B) i am getting error message "Pricing Error :Mandatory condition NAVS is Missing".So how do i configure this pricing process.
    Check the pricing procedure in IMG - Purchasing - Conditions - Define Price Determination Process - Define Calculation Schema - Check for calculation schema - NAVS has been maintained.
    Also when i am creating a Frame work order do i need to select the document type both in PO and PR as frame work order or NB order type will work with these config of Item cat B and acc *** Y?
    You need to choose document types while creating purchase transactions. If that document type doesnt support item category B- then you will get an error message.
    When i am creating a PR or PO with doc type frame work order the order unit is automatically populating as "AU" is this something std or do i have to do anything in configuration?
    For services (D category) we define AU as default unit (IMG - MM - External Services Management - Source Determination and Default Values - for Client/for Purchasing Organizations)
    When i created a PO with ref to PR aith account *** K into the PO and add the item category B the charging information was not maintained so how to maintian this?
    How to maintain the accounting info from PR?
    create Framework requisition and then copy it to a PO.
    Thanks

Maybe you are looking for

  • Cross-references crash FrameMaker 11

    We recently upgraded from Tech Comm Suite 3.5 to 4.0 (with FrameMaker 11), in a Windows 7 environment. We have had several instances--on different workstations with different people--of FrameMaker 11 crashing when people are trying to create a simple

  • How to pre-populate fields for new entry in table maintenance

    Hey everyone, I have a table maintenance set up that I would like to pre-populate two date fields when the user creates a new entry or copies an existing entry. I can do this by adding a PBO module for the maintenance screen but then if the screens a

  • Error 21 (and 1600 in DFU mode) when updating/restoring to iOS 5.0.1

    I am getting Error 21 when I update or restore my iPhone 3GS (currently at 4.2.1). I don't have any security software installed so that shouldn't be the problem. Trying to restore in DFU mode brings up an Error 1600 instead. I have also tried using a

  • What is powerd and why is it using so much cpu

    When I check the activity monitor, it is almost pegged out. Because of this other things run slowly. So, what is "powerd" and why is it all of a sudden using so CPU?

  • Started using a Yamaha n12 with Logic... having problems!!

    Hi Guys Just wondering if anyone is using a Yamaha n12? I've just bought one to replace (tentitively!) my Mackie Onyx 1220... First thing I noticed was that the n12 wasn't "plug and play" the way the Mackie Onyx was. It didn't show up in the "sound"