Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Similar Messages

  • Process has no predecessor while creating process chains for Inventory

    Hi Experts,
    I have created process chain for Inventory and this inventory cube have compression also.so, i included compression of the infocube after create index.
    Here while i am checking the chain ,am getting the error called :  PROCESS HAS NO PREDECESSOR.
    Please give some inputs,what does it mean and how to solve.
    Thanks
    Lakshmi

    Hi Murali,
    Thanks for your reply.
    You mean to say that i should not include BX-IP,DTP in the list.as we know that this is only one time job.
    But in prodn system with out including BX in the list,how to initialise for the first time.
    So,first time we need to manually run the IP,DTP in prodn system.
    Plz let me know.
    Note:Murali, In the process chains list after create index,i dragged "COMPRESSION OF THE INFOCUBE" and i specified 0IC_C03 CUBE and continued.
    Along with compression of the infocube there is one more box has come into picture i.e SIGMA ADJUST(GENERATED FROM COMPRESSION ZPC_INV_0IC_C03_COMPRESSION) like that its came.
    Do we need to remove that or should i keep it in the list.
    Thanks
    LaxmanNaidu

  • "Error While creating Process Chain"

    Hi all,
    I am Creating a process chain in that I have to load from ODS to Cube,
    If I include process types "Activate ODS" and "Update ODS" in process chain its Loading Delta from ODS to Cube,  But my Requirement is to load FULL LOAD from ODS to Cube, If i select Full load infopackage from 8ZODS and place it in the chain after Activate ODS its giving errors as 
    Errors:
    InfoPackage is generated; NOT able to be used as loading variant
    A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_42622G5QGKNFH2LSX5PN6DAG6 in the chain
    Please Guide me what to do? and Brief me the sequence to create a Process Chain(loading full and delta from ODS to Cube).
    Thanks in Advance,
    Sai

    hi Sai ram...
    <b>Create a FULL Infopack by  Copying  the Full IP which was generated at the 8ZODS.</b>
    Sequence for full is.
    1) start Process
    2) LOAD IP
    3)ACTIVE ODS
    4)EXECUTE IP(Full IP which was copied)
    For Delta
    1) start Process
    2) LOAD IP
    3)ACTIVE ODS
    4)Further Update Process type..(give the ODS name here from where u want to load to Cube.)
    put the Indexes where ever nececssary ...
    hope it helps
    regards
    AK
    Thanks=points
    Message was edited by:
            A K

  • How to create source system for flat file loads

    How do I create a source system to load flat file?
    I have a screen that asks for the following:
    Logical system name
    Source system name
    Type and release
    What should I enter for these?
    I am not Basis and Basis was supposed to set this up.

    hi sam.
    STEPS TO CREATE FLAT FILE SOURCE SYSTEM
    step:1 select source systems under modeling in AWB.
    step:2 select Source Systems root node.
               |---> context menu
                   |--->create......
    step:3 select your required source system Icon.
              (in your case it is PC Icon).
    there it askes for a logical.......and source system name...
    here u can specify any name of ur wish
    for example:-
    logical sys name --- PC_FF
    source system name --- flat file source system*
    *press Continue * button.
    Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

  • Error while activating Process Chains

    Hi all,
    while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
    when i double click on the error msg, i got the following help msg: "
    <i>Message no. RSPC065
    Diagnosis
    Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.</i>
    Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
    Points will be given
    Thanks
    Ganesh

    Hi,
    Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
    and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
    <b>OSS : 511475</b>
    <b>Symptom</b>
    You cannot schedule or perform any batch jobs with the BW or source system background user.
    The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
    <b>Other terms</b>
    RSPC065
    <b>Reason and Prerequisites</b>
    The user type is
    "CPIC" up to 4.6B
    "Communication" as of 4.6C
    This user type may not execute or start any batch jobs, irrespective of the user authorizations.
    <b>Solution</b>
    Set the type of background user to
    "Background" up to 4.6B
    "System" as of 4.6C
    This user type corresponds to the "Communication" type and may also perform background functions.
    Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
    BW 2.0B
               Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
    BW 2.1C
               Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
    BW 3.0A
               Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.
    <b></b>

  • Error while creating a task for creating an generic task  /app/dac/CustomSQ

    Hi ,
    I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
    In DAC task tab i have created a task with the following:
    Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
    Primary source :flatfileconnection
    target source:DBCONNECTION_OLAP
    Execution type:SQL FILE
    Task phase:GENERAL
    I created subject area and assembled ,then created a Execution plan.
    When i try to execute this EP ,it shows the following error in DAC log:
    ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
    MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
    com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
    Does my above configuration is correct ..?

    verify the following settings:
    1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
    2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

  • How to create process chain for 0EMPLOYEE

    I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

    Hi,
    Follow the following steps:
    1. Go to RSPC->create->give name and disc of your chain.
    Start Variant Creation
    2.  Now you will be prompted to give a start variant,create a  new variant(click on page icon )
    3.Change Selections->date/ time.
    4.give date and time for start of the chain.
    5.click the check box for periodic job->period values->daily->save->save
    Addition of process types
    6.Select the process type "Execute Infopackage"
    7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
    8.Attribute Change run will come automatically( if not then drag it as well and create variant )
    9.select the name of the infopackage which loads text data to 0EMPLOYEE.
    10.Attribute change run wil again follow.
    (connect the process types which are not connected,by right clicking the process types )
                                 start
                           IP A     IP  T
                          attr          attr
    A = attribute
    T = Text
    Please Reward points if useful
    Manish

  • How to create process chains for Master Data?

    I need information on " how we can create process Chains for Master Data"

    Hi Sachin,
      http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    and also Modelling aspects in process chains (ppt)
    https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
    Hope this helps.
    Srini

  • How to Create Process Chain for Remote Cube.

    Hi,
              I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
    Thanks,
    Nandish Gowda

    Hi Nandish,
    After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
    If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
    Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
    Regards,
    Suman

  • HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

    SDN EXPERTS,
    i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
    thanks

    Hi,
    In the below document on the 14th page it says it is not possible to archive the master data & PSA.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
    As per my understanding..
    But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
    Correct me if i was wrong and eloborate your requirement.
    Regards, Siva

  • How to create Process chain for Aggregate for Master data

    Hello friends,
    I created Aggregates on Navigational Attributes.
    Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
    The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
    So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
    How to create process chains for the same ?????????
    Because if master data changes, then rolling up the aggregates straight forward will not help.
    So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
    If i mis interpreted something please rectify it.......
    Please advise

    Hello,
    the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically.  There is no need to deactivate them after master data loads.
    Best regards,
    Ralf

  • What are the settings for datasource and infopackage for flat file loading

    hI
    Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
    pls let me know
    regards
    kumar

    Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
    Uploading of Transaction data
    Log on to your SAP
    Transaction code RSA1—LEAD YOU TO MODELLING
    1. Creation of Info Objects
    • In left panel select info object
    • Create info area
    • Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    • Create new characteristics and key figures under respective catalogs according to the project requirement
    • Create required info objects and Activate.
    2. Creation of Data Source
    • In the left panel select data sources
    • Create application component(AC)
    • Right click AC and create datasource
    • Specify data source name, source system, and data type ( Transaction data )
    • In general tab give short, medium, and long description.
    • In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    • In proposal tab load example data and verify it.
    • In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    • Activate data source and read preview data under preview tab.
    • Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    • In left panel select info provider
    • Select created info area and right click to create ODS( Data store object ) or Cube.
    • Specify name fro the ODS or cube and click create
    • From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
    • Click Activate.
    • Right click on ODS or Cube and select create transformation.
    • In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    • Activate created transformation
    • Create Data transfer process (DTP) by right clicking the master data attributes
    • In extraction tab specify extraction mode ( full)
    • In update tab specify error handling ( request green)
    • Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
    Loading of master data in BI 7.0:
    For Uploading of master data in BI 7.0
    Log on to your SAP
    Transaction code RSA1—LEAD YOU TO MODELLING
    1. Creation of Info Objects
    • In left panel select info object
    • Create info area
    • Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    • Create new characteristics and key figures under respective catalogs according to the project requirement
    • Create required info objects and Activate.
    2. Creation of Data Source
    • In the left panel select data sources
    • Create application component(AC)
    • Right click AC and create datasource
    • Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    • In general tab give short, medium, and long description.
    • In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    • In proposal tab load example data and verify it.
    • In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    • Activate data source and read preview data under preview tab.
    • Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    • In left panel select info provider
    • Select created info area and right click to select Insert Characteristics as info provider
    • Select required info object ( Ex : Employee ID)
    • Under that info object select attributes
    • Right click on attributes and select create transformation.
    • In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    • Activate created transformation
    • Create Data transfer process (DTP) by right clicking the master data attributes
    • In extraction tab specify extraction mode ( full)
    • In update tab specify error handling ( request green)
    • Activate DTP and in execute tab click execute button to load data in data targets.

  • Best practise around handling time dependency for flat file loads

    Hi folks,
    This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
    It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
    Thanks.

    Bump!

  • Error while creating process instruction sheet in COR2

    While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
    Define variable QTYPRODUCED for default value
    Message no. CPOC110
    Diagnosis
    In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
    If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
    Procedure
    Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
    Define Variable
    Regards
    Kumar

    1.  Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
    2.  Assign the required variable name to characteristic PPPI_VARIABLE.

  • Beginner Process chains on flat files

    Hi,
    I have 6 ODSes which I load from 5 different flat files located on my desktop on a daily basis and a 6th file which I load once per week. All 7 files are then pushed to a cube before reporting can be done.
    Being the first timer on creating process chain, do you have any straight forward steps to guide me?
    Is the fact that the files are on a local machine a problem?
    Any hints on making it perform well will be appreciated.
    Thanks

    Hi Amanda Baah 
    In general in AL11 system wont allow you to place thats way u need to place it in the servel location Via TELNET ..
    Ask your BASIS guy they will help you...
    Hope itz clear a little atleast...!
    Thanks & Regards
    R M K
    ***Assigning pointz is the only way of saying thanx in SDN ***
    **Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
    > Hi,
    >
    > it did not work as I thought.. I have a few questions
    > on this:
    >
    > 1.
    > Regarding AL11, I see the existing folders but there
    > is no option to upload or download files. Any guide?
    >
    > 2.
    > Regarding the comment “Instead you use the function
    > module ARCHIVFILE_CLIENT_TO_SERVER to upload the
    > local files to Application server.” Can you direct me
    > on how to execute this and download and upload files?
    > I thought it was a tcode initially.
    >
    > Thanks

Maybe you are looking for

  • ABAP Dump  CX_SY_DYN_CALL_PARAM_MISSING

    Hi Experts, I am getting the below dump while clicking on  the check button in tcode /cockpit/1.  Below dump is happening. Any  suggestion to come out of this? Category               ABAP Programming Error                                             

  • Error in the Informatica when running the DAC load( Prebuilt Analytics)

    Hi All, Please help me with the below issue with the informatica i am getting when running the DAC load: Below are the details: SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0

  • How do I convert a document so others can read it

    Hi I have sent a couple of documents to others one of which has pictures and text and the other just text, and they have said they can't open it and can i send it in a jpeg format but will that work. Please Advise as to the best way to send out so al

  • F4 help on Parameter for ddic domain does not work

    Hello, I try: Parameters:  pa_waers TYPE WAERS. WAERS is a ddic data element for currencies and also a  domain with this name exists. The domain WAERS has a check table TCURC. When I press F4 for my field PA_WAERS in the Selection Screen, I assume a

  • Processing service request error: QuickTime Error: -50? ***?

    Hey everyone, trying to export a movie from FinalCut Pro X with compressor and when compressor gets to the end I get this error and no file Processing service request error: QuickTime Error: -50 What is going on? Final Cut Pro X version 10.0.7 Compre