Error while creating Purchase order

Hi Experts,
No posting rules exist for account key
Message no. FF714
Diagnosis
No posting rules have been defined for the account key in the tax table in table T007B.
Procedure
Change the tax table, enter an account key already defined for the transaction in question or define the posting rules for a new account key in table T007B.
I have maintained all account keys in Tax Procedure.
Plz let me y this error is coming.

Hello,
Goto T.Code OB40.
Select the account key you have mentioned in your calculation procedure, and give your Chart of accounts.
Then goto 'Rules' Tab and maintain the fields (against tax code or not) against which you want to maintain G/L accounts for tax processing.Save the entries and try the transaction again.
Regards
Gregory Mathews

Similar Messages

Error while creating purchase order with account assignment category "A"

Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tags

HI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik

PO doesnot exixt while creating purchase order

Hi all,
I am getting an error while creating purchase order that " PO number doesnot exist".
When I repeat creating it, PO with next number is getting created.
What could be the reason for this?

Use SM13 and check if you have any entry for the update failure. If yes, analyse with tech person,

Deleated Valuation Type --Need Error Message while creating Purchase Order

Hi,
In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
In current configuration , it's not there.
Await your expert opinion.
Regards
Shyam Kogta

I investigated this recently in our company and gave this answer:
A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
The archiving run then checks if a deletion is possible or not.
So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.
In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
There is one for goods receipts (but only for a certain industry solution that is not used by us)
There is one for deliveries ( VL 211 ).
The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type ABC , while an internal order (production) gets the DEF. Usually there should not be a need to change this valuation type manually.
So the only solution is to archive the material master at valuation type level.
But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

While creating Purchase order the system is showing error: vendor 200001145

Hi experts,
while creating Purchase order the system is showing error: vendor 200001145 on line 00010 for ctype ZB12 not defined as head office vendor.
Plz give solution for this.
Thanks&Regards
sreenivas

Hi,
Please check vendor schema maintained in the vendor master,. through this condition type arepicking from system
Aboue condition type not mainatained inthe caluation schame ,which you assigend to vendorand purchasing organization
regards
Channa
Edited by: channadodawad on Dec 3, 2009 9:22 AM

Error while creating return order(Complaint) in IC web client

Hi SAP Experts,
I am getting following Error while creating return order(Complaint) in IC web client.
Error when processing your request
What has happened?
The URL http://sapcrd.comfort.com:8000/sap/bc/bsp/sap/crm_ic/default_delta.do was not called due to an error.
Note
The following error text was processed in the system CRD : Exception condition "NON_EXISTING_HANDLE" raised.
The error occurred on the application server sapcrd_CRD_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: PRC_PD_HEAD_ADD_COND of program SAPLPRC_PRICING_API
Function: CRM_PRIDOC_UPDATE_EC of program SAPLCRM_PRIDOC_COM_EC
Form: EXECUTE_CALLBACKS_PLANNED of program SAPLCRM_EVENT_OW
Function: CRM_EVENT_SET_EXETIME_OW of program SAPLCRM_EVENT_OW
Function: CRM_ORDER_COMPLETE_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_MULTI_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN of program SAPLCRM_ORDER_API
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
Method: IF_EX_ORDER_SAVE~PREPARE of program CL_EX_ORDER_SAVE==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcrd_CRD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server sapcrd_CRD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 330 -u: VORUSX -l: E -s: CRD -i: sapcrd_CRD_00 -w: 2 -d: 20080324 -t: 021723 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Maximum points will be awarded for useful information.
Thanks,
Rony

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

Error while creating Work Order

Hello Experts,
I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
Please advise.
Thanks
Deepak

Hi,
Plz check this thread:
What does this error mean?

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Issue while creating Purchase order (ME21N)

Hi Friends,
Hope U Have a Good Day...
My issue is while creating purchase order , I enter vendor and in org.data tab I enter Pur.Org,company code and purchase group. After entering these values if I check in communication tab, the sales person and telephone fields are filled with corresponding data.
Now my requirement is after entering Pur.Org, Company code and purchase group, and if I go and check in Communication tab, these two fields ( sales person, telephone ) should be blank.
Please help me in this issue...
Thanks & Regards
Ganesh Reddy

Hi Ganesh,
This is being fetched frm the vendor master and if u wan this field to be blank
Then u hav to remove those data frm the vendor master .
Put tat vendor, comp code n purchase org
Then select pur org data alon - >chk in purch data
u can find tat sales person n telp no being appeared in the PO
lemme know if u hav any prob in getting tat .

Price not picking while creating purchase order

hi all,
i have created a pricing procedure and assigned to the vedor, but while creating purchase order the material price is not picking up.if i use the standard one the price is picking up. can anyone explaing any setting iam missing.
regards
thyagarajan

Hi
In your pricing procedure
For the condition type Automatic Gross price PB00, you have assigned am Access sequence.
<b>Access sequence</b>: An access sequence is a search strategy by means of which the system searches for valid records in various condition tables. It consists of one or more accesses. The sequence of accesses controls the priority of the individual condition records among each other. Through the accesses, the system is told where to look first and where to look next for a valid condition record in each case.
Once the pricing procedure triggers, System looks for the valid condition recorrd for the condition type PB00 as per the priority listed in Access sequence.
Example: If purchase info record is the first priority and you maintained the Info record then system picks the price from Info record into PO.
If no valid condition record found then it will trigger PBXX Manual Gross price condition in PO and ask to enter the price manually.This is called condition technique.
So check whether you maintained the Condition record for PB00 or not?
Regards
Ramakrishna

Revenue Recognition - error while creating sales order

Hi,
one of my colleague is having a Problem. Its very urgent. could you guys help.
I have used Revenue recog as"b" and Accrual start period as "a".
We are getting the error while creating a sales order, G/L account no. not found.
We have checked all the account assignment config but couldn't find anything.

Hi guys,
I have a question, we being SD consultants, do we deal with n e of the revenue issues, I am assuming we deal it to a really brief extent, but I am not familiar with the areas of doing it, so could someone please help me by letting me know the areas where we deal with those issues and how are they looked upon, any material would also be great.
Just in case, my email is : [email protected]
Look forward for a response
Thanks..

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

Error while creating Maintenance order

Hi,
While creating Maintenance order with any order type (PM01,PM02 & PM03) & entering material in component Tab, the system is giving this Error 'Entry does not exist,check your entry'
The used material is already maintained in the Material Master with all necessary information.
Kindly suggest the best possible solution for this problem.
Thanks in advance
Rohit8384

Hi,
The following error is coming while order processing.
Entry    does not exist - check your entry
    Message no. 00 058
Diagnosis
    Input values must be defined in Table MARA. The value or values ' ' are
    not specified in this table.
Procedure
    Check whether the input is correct and correct if necessary.
Procedure for System Administration
    If this is not an incorrect entry, check the system settings and change
    them if necessary.
    If there is a connection to the Customizing system, you can maintain the
    system settings by choosing Maintain entries (F5)
Thanks in Advance.
Rohit

Error while creating Purchase order

Similar Messages

Maybe you are looking for