Error while creating sales order for material with another DIVISION

Hello Friends,
I have a problem with my sales order creation.
I have defined a new sales area 0010 / 10 / 01. I have the sales order type assigned to this sales area. (in VOV8 for the sales order type, in the 'General Control' the 'item division' is flagged.
Now, I have created the sold to party XYZ with all the partner functions defaulted same as the sold to party for the sales area 0010 / 10 / 01.
NOW, I have the material ABC with the DIVISION 10 in the basic data. I have extended the material to my sales org & dist. channel & plant.
Now, while creating the sales order for my sales area 0010 / 10 / 01 , I enter the sold to party XYZ - it is OK. But when I enter the material ABC, I get the error - "SHIP TO PARTY IS NOT DEFINED FOR SALES AREA 0010 / 10 / 10"
Please help to resolve the issue.
Edited by: Vivek on Aug 13, 2009 9:04 AM

Hi
Common division for Material Master data will not work
Because in the material master Division is a field not an organizational unit
Means when you create MMR you will give sales org, DC, Plant  as organizational units and then enter but not division
Division is a field maintained in basic data and sales org data 1
This is the reason in t code you will find in t code VOR2 Common division only customer and conditions but not materials
But in t code VOR1 Common DC ,customer  conditions and materials all there are available (you can check these t codes)
Coming to your issue Item div is clecked in your order type
This means the division in MMR has the priority or control for that order type
Your header division is 01 ( taken from customers sales area) and item division is 10 (taken from MMR as per your post)
So it differs
To process this order with Item div is clecked in your order type you need to extend your Sold to party ABC to the sales area 0010/10/10 (the sales area where the division of the material falls)
or alternatively
There should be a  customer say DEF created in sales area 0010/10/10 who will be a ship to party ( your error is also the same)
for your ABC  that is sold to party in sales area 0010/10/01 where the order is registered
Hope yopu are getting it
ABC in sales area 0010/10/01 will have  or should have ship to paty DEF  in sales area 0010/10/10 
or
ABC should operate in in sales area 0010/10/10  too
If item division is not ticked then these are not necessary as the header division 01 will be valid for all items and syatem will not look MMR at all for division
Regards
Raja

Similar Messages

  • Error while creating sales order for a new company code

    Hello SD Gurus,
    The client wanted us to create a new Company Code, Plant, and Sales Organization. We created them. I extended the customer and material in QAS. Now, I'm trying to create one sales order in QAS but the system is throwing one error: "Maintain Profit Center Value in Custom Table in YSD_PROFIT_CNTR".
    I googled for this error but found nothing. Could you please give me the solution asap. I need to prepare test script.
    Thanks in advance
    Regards,
    Anwar

    Dear Mohammed,
    The error message itself states where is the issue. You need to maintain the profit center in table
    YSD_PROFIT_CNTR. This is not SAP Standard provided solution. I guess during the time of implementation team has suggested to maintain the profit center in custom table.
    If the table is"maintenance view" then you can check through SM30 and maintain the relevant entry. If not check if there is any transaction code with attached to this table. This you can check by going through SE93 and by entering Z* or ZSD* or Y* or YSD* and press F4, If the transaction code is starting with Z or Y it will open all the list of transaction codes. By going through the description of the transaction code. you can pick the right transaction code in case if any exists for this table.
    Hope this information is useful to you.
    Regards
    Murali

  • Error while creating sales order

    while creating sales order for a particular plant there is error coming
    NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
    PLANTXVBAK-VKBUR.
    Intailly I have check the no series we have internal no series for all plant,the 
    number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
    kindly guide me for the same.

    Hi Sanjay
    This is regarding number ranges defining and assigning tips which you can follow as below:
    Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
    Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
    In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
    Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
    Here you provide the system a specific Number range as follows:
    Number range Key Start Number range End Number Range+Current Number
    For Example: If you want to propose the following Number Range
    *1     9000076000      9000076999      0
    The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
    *1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
    If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
    Here , by making this , you are assigning a Key to a Number Range Series.
    All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
    Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
    The Assigning Part is done as follows:
    The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
    This can also be reached in IMG by:
    Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
    Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
    Besides this:
    If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
    Similarly,
    If a new Plant is created then Billing Number Ranges are required to be maintained.
    Regards
    Naren

  • Error while create sales order

    Hi,
    Please help.
    I am facing error while create sales order.
    No item category available (Table T184 OR VERP  )
    Message no. V1320
    Diagnosis
    No item category could be determined for the combination OR VERP .
    System Response
    The system does not allow further processing of this item.
    Procedure
    Check the entries in table T184 by means of which item category determination is controlled.
    If you do not have the authorization to do this yourself, contact your system administrator.

    Hi,
    Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
    Path
    SPRO-SD-sales-sales douments-sales document item-assign item categories.

  • Error while creating sales order with ref to contract

    while creating sales order, with refernce to contract system is giving a message
    Configuration not possible for material : Reason 3 --> Help
    Message no. V1360
    and the message is as follwed can any one explain
    Diagnosis
    This may have been caused by one of the following:
    1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
    2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
    3. A configuration profile has not been maintained
    or
    A configuration is not permitted for the material
    or
    4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

    Hi
    I think you have both Variant configuration and BOM.
    Pls ensure the following.
    1. BOM masterdata is maintained for the variants
    2. Variant configuration is configured correctly
    Configuration profile is created for the material
    Knowledge base object and run time version are available
    3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
    Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
    Reward points if it helps you.

  • End of Valid Logistic Calender error while creating Sales Order

    Hi,
    While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
    24.01.2202 date comes after end of valid logistics calendar. (Please
    correct)
         Message no. 61062
    Can anyone suggest on the same.
    Regards
    Nilofer

    Hi,
    The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
    "24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
    We also face one more error such as
    " Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
    From where system is taking 24.01.2202 date?

  • Runtime error while creating sales order in VA01

    Dear all,
    In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
    application patch level for both production and development is same.
    can any one suggest the solution please

    Please note the error details
    Runtime Errors         SYNTAX_ERROR
    Date and Time          07.01.2010 17:43:06
    Short text
    Syntax error in program "RK2LSFOC ".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLKEAK" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
    " in
    line 128:
    "No component exists with the name "KWBRUM". ."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP* "
    Error in the ABAP Application Program
    The current ABAP program "SAPLKEAK" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "RK2LSFOC ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    The following syntax error was found in the program RK2LSFOC :
    "No component exists with the name "KWBRUM". ."
    |    " "

  • Run time error while creating sales order in VA01

    Dear all,
    In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
    application patch level for both production and development is same.
    can any one suggest the solution please
    Moderator message - Cross post locked
    Edited by: Rob Burbank on Jan 7, 2010 10:03 AM

    ths

  • Hi   error while creating  sales order

    hi
    i am getting 'not able to save' message while i am creating sales order.
    how should i proceed to know where is the problem???
    i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
    there is no wrong data entry while creating sales order.
    i just want to know what are the ways to know where is the problem in the standard code.
    thanx
    rocky

    hi ,
    try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP  then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
    srinivas

  • Duplication of Purchase Order while creating sales orders for a customer

    when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
    But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
    for example..when we create sales order 1 the purchase order picked is PO1 and
    for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
    No idocs are being generated in this, even to check them..
    How shall i resolve this...? Please help me out ASAP

    Hi Kumar,
    Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
    Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

  • Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

    Hi
    I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
    Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
    In VBUK table there is no value for VGTYP.
    Can you please help me how to resolve it.
    Thanks & regards
    kiran

    Problem resolved by passing   REFDOC_CAT in the FM along with  SD_DOC_CAT.
    Thanks

  • Revenue Recognition - error while creating sales order

    Hi,
    one of my colleague is having a Problem. Its very urgent. could you guys help.
      I have used Revenue recog as"b" and Accrual start period as "a".
      We are getting the error while creating a sales order, G/L account no. not found.
      We have checked all the account assignment config but couldn't find anything.

    Hi guys,
    I have a question, we being SD consultants, do we deal with n e of the revenue issues, I am assuming we deal it to a really brief extent, but I am not familiar with the areas of doing it, so could someone please help me by letting me know the areas where we deal with those issues and how are they looked upon, any material would also be great.
    Just in case, my email is : [email protected]
    Look forward for a response
    Thanks..

  • Error while creating sales order in ECC 6.0

    Hi All,
    I am creating sales order through VA01.
    Error comes As "Repairs processing with cost management only for the main item"
    The material which i am using is finished goods.

    Dear Akilesh,
         Just check whether the material - in MM - material type whether the Qty and value update has been ticked.
    What order type you are using and what is the item category you are using?
    Kindly let me know that also
    Regards,
    Sudhir

  • Error while creating sales order using SD_SALESDOCUMENT_CREATE

    Hello All,
    We are using to  SD_SALESDOCUMENT_CREATE function module to create sales order it is working fine for single material.
    When we try to create sales order with multiple matearials we ended up with the following errors
    SALES_HEADER_IN has been processed successfully
    000000
    VBAKKOM
    Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
    000000
    CONFIGURATION_PROCESSING
    Error in SALES_ITEM_IN 000010
    000000
    VBAPKOM
    Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
    000000
    CONFIGURATION_PROCESSING
    Error in SALES_ITEM_IN 000020
    000000
    VBAPKOM
    SALES_ITEM_IN has been processed successfully
    000000
    VBAPKOM
    Could any one help me out to resolve this issue.
    Thanks in advance....
    Cheers,
    Harsha

    Hello,
    Looking at BAPI errors. It looks like you are trying to create sales order with variant configuration.
    Check Below SAP Note.
    900380 - Configurable items in the SD process (idocs & bapis)
    Regards,
    Sameer

  • Error while creating Sales Order Through BAPI

    Hi Friends,
      i am creating a RFC where i have to create sales order .
    I am using bapi
    BAPI_SALESORDER_CREATEFROMDAT2
    for same and entering values to it.
    I got the following return messages:
    S V4                   233 SALES_HEADER_IN has been processed successfully
    S V4                   233 SALES_ITEM_IN has been processed successfully
    S V1                   311 BDN Order 3112800903 has been saved
    But when I go to transaction VA03 and enter the number i get the following error:
    SD document 3112800903 is not in the database or has been archived
    Can any one know how to resolve this error.I am also using BAPI_TRANSACTION_COMMIT with wait = 'X'.
    Regards,
    Santosh Alle

    Hi,
    Try to check the return message once.
    SD document 3112800903 is not in the database or has been archived
    You will get this message if the sales document is deleted from the database .The BAPI   'BAPI_SALESORDER_CHANGE'  is used to delete salesorder.Check whether anyone has deleted it
    Also, sometimes it may take few seconds to update the sales order in the database when using BAPI. Check the transaction after some time.
    Regards,
    Lakshman.
    Edited by: Lakshman N on May 14, 2010 7:43 AM

Maybe you are looking for

  • XML parser error while testing web service client using jdeveloper 10.1.2.1

    hi I have generated a web service stub/skeleton out of the wsdl file using jdeveloper 10.1.2.1.0. The client will return a complex type result, i.e., it will return an array of elements. When I try to run the client using jdeveloper 10.1.2.10 i am ge

  • Error -34 and error -50 message while preparing a project for iDVD

    I keep getting an error -34 and and error -50 message when I try to prepare a project for sharing in iMovie. Does anyone know why this might be please? I managed to create a DVD before with this project but then went back in and changed some of the t

  • Create Free Good item with Action profile assigned to item category

    Hi, I want to create a free good for an item in a CRM sales order only during a certain period with an action ie if the main item is entered in a sales order during a certain period, a sub-item which is different from the main item should be created

  • How do I get my external hard-drive recognised by iTunes?

    I have 2 external hard drives, but now iTunes 12 will only recognize 1 of them. When I plug in the second for a back-up, it doesn't show up on the screen. This just happened with the latest upgrade to iTunes 12. I have a MacBook with OS X Version 10.

  • Im so excited but i need opinions ?

    im excited because i want to get the iphone 5s but i want to know from the people who have it if they had had any complaints or problems that u had to return it or need a replacement wich i doubt since the iphone 5s is new ! and i know this is a twch