Error while creating Support message

Hi,
When I tried to create OSS Message from R/3 system I am getting below error.
Customizing for feedback functionality missing
Can you please help me out from this issue.
Thanks
Rajesh

Rajesh, this usually means the managed system is not set up to communicate with the Solution Manager Service Desk.  Please review the SolMan IMG activity Specify Service Desk Destination in Managed Systems.  The Performance Assistant will tell you what entries to make in table BCOS_CUST on each managed system.
If this does not work, check your user authorizations on both systems - they should both contain object S_RFCACL.
Hope this helps!
Lori

Similar Messages

  • Error while Submiting Support message through Web browser

    Hi Gurus
    I am geting error while submiting Support message through Web browser i.e BSP . Please find the error message below
    "Error: The system could not create the message because of an RFC connection "NONE " error Service-specific Csutomizing missing for transaction ZLFN"
    Note: ZLFN is our Service Desk Message type.
    Any ideas where i am doing wrong?
    Points will be rewarded
    Thanks
    Bhaskar

    Hello,
    check if when you configured your new transaction type ZLFN you have included a corresponding entry in view CRMC_SERVICE_H.
    If the transaction type is missing in this view, you have this error.
    Regards,
    Raquel Cunha

  • Error while creating candidate (Message no. HRRCF0001155)

    Hi experts,
    I am launching recruiters page thorugh NWBC. While creating external candidate application, I am getting this error -
    Error while creating candidate
    Message no. HRRCF0001155
    In SLG1, below is error analysis -
    @5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
    @5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 186 @35\QLong text exists@ @16\QDetail exists@
    @5C\QError@ Error while creating candidate @35\QLong text exists@ @16\QDetail exists@
    @5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE_REGISTER===CM001 line 118 @35\QLong text exists@ @16\QDetail exists@
    @8N\QCancel@ Business partner 824 already exists @5F\QNo long text exists@ @16\QDetail exists@
    @5C\QError@ The error occurred in program CL_HRRCF_CANDIDATE============CM002 line 132 @35\QLong text exists@ @16\QDetail exists@
    Please help.
    Thanks,
    Neha

    Hi Nicole,
    Thank you very much for the reply. You are correct, but I checked the SICF set up was ok. Currently we are not using the workflow. Recruiter's role assignment was also proper.
    This problem was related to business partner number range assignment for internal/external candidates, since it was not creating new business partner. It is ok now.
    Regards,
    Neha

  • Error 513 while creating support message help menu in Solman system.

    Hi Expert
    I am trying to create support message though help in the Solman system. But i am getting an "error 513 message has not created in the Solution manager system".
    - maintained the BCOS_CUST table with RFC - NONE
    - have SAP ALL authorisation
    - using the transaction type SLFN for support message.
    - Check the Action profile for SLF1 and found OK.
    - Also refered some notes in the sap and implemented but still i am getting the same error.
    Please advice.
    Regards
    Kumar.

    HI
    Do u have BP existing for ur id in solman
    Use BP_GEN to create bp for ur user id
    otherwise using BP tcode and check if the identification tab is carrying details for solman system with curent client and userid
    Hope it solv ur prb
    Regards
    Prakhar

  • Error while creating a Message Area

    Hi All,
    When I create a Message Area using the UI element 'MessageArea', I get the following error message at the bottom of the screen:
    "Note: Multiple message areas have been implemented, but only one is supported"
    I just have only one Message Area created, but still I get this error.
    Regards,
    Tom

    > 1) I am getting the error message"Valuation area not defined", while creating a requisition. How to solve this problem?
    Please Go to OMS2 Material types and Select Material Type and set Qty / Value is Checked in all Valuation areas. Also go to Material Master and ensure all the values Maintained in Accounting view.
    > 2) We can put a purchase order on hold. What is the equivalent thing in Purchase requisition?
    The Hold Functionality is for External Documents only.
    > 3) What is the difference between holding a PO and changing the PO by ME22n? What are the fields which change PO does not open up, but hold PO opens up?
    Whenever you are not sure about the Details in PO you can put the Document on Hold and Later you can Save after.
    > 4) The tax code is set as default in PO. We want to make a PO of a material which is usually taxable, but not in this case. But the tax code is set as default. So, how to overcome this?
    You can not set Default Tax code for Purchase order ME21N. Further the Tax codes can be Pulled into Purchase Order thru Purchase info Records.
    Regards,
    Ashok

  • Can we Set the Default SAP Component while Creating Support Message

    Hi Friends,
        I Have got requirement like, when we create the support desk message from any application system by default the sap component should get selected which we have determined in Solman.Our Business secnario is too complex user give create the support message without giving the Sap Component or they give wrong sap Component, so we want to set the sap component get selected by default while creating the support desk message, guide me in solving this issue.
      Regards
        Charan

    I think your logic is reversed.  I think it's better to let users create messages from the application areas from which they are having the problem.  Based on the standard SAP component which defaults into the component field, the ticket can be routed to one of your 20 teams.  This is where the agent detemination rule for support team can be configured.  There are a number of message on the forum regarding support team configuration.  This way, if your 20 teams can't solve the problem (for example SAP defect) then the message can be forwarded directly to SAP using the correct component.  Good luck.

  • System data while creating support message

    Hi,
    I would like to know if there is any way to remove the system data from the support message long text (Transaction Data - Overview). In my case we don't need this information in the support message.
    Thanks in advance.
    Best regards,
    Sérgio Vieira

    Hello,
    I'm talking about the message in the Overview tab, under Transaction Data.
    Thanks in advance.
    Best regards,
    SV

  • Error while creating SC: Message E COM_PRODUCT_SETTINGS 001

    Hi Experts,
    When try to create a SC the error message is through: Message E COM_PRODUCT_SETTINGS 001 cannot be processed in plug mode HTTP.
    I am configuring the SRM7.0 for the first time and system throws the error message. Kindly help to resolve this issue.
    Please find the screen shot enclosed.
    Regards,
    Sudhakar

    Hi Sudhakar,
    Are you on the recent level of SRM 7? If not - check if this OSS note is relevant for you 1449146.
    The system you are configuring - is it a copy of another system or being set up from scratch?
    Check your:
    Initial data load (customizing objects and master data)
    Org structure (wrt to both users and purchase organization)

  • Error while creating infotype message no. pg293

    Hi guys,
    I am creating a new infotype after creating the PS structure when i click on generate objects i get an error saying "An internal error has occurred" message no. PG293.
    kindly provide a solution.
    points will be rewarded.
    thanks

    INFOTYPE CREATION WILL BE TAKEN CARE OF THE ABAPER AS RAO SAID
    AS THE OUT PUT WILL HAVE TO SEEN IN ALL THE SERVERS THIS IS A LITTLE BIT TECHNICAL WORK
    Start transaction PM01, Create Infotype, by entering the transaction code.
    You access the Create Infotype screen:
    2. In the Infotype no. field, enter the four-digit number of the infotype you want to create.
    When you specify the infotype number, please remember to enter any leading zeros.
    3. Choose IT characteristics.
    This accesses the Display View “Infotypes”: Overview screen.
    4. Choose Table view   Display   Change.
    This accesses the Change View “Infotypes”: Overview screen.
    5. Create a new entry for your infotype.
    You can create new entries by
    – choosing Edit   New entries or
    – copying an infotype entry with similar characteristics.
    If you want to copy an existing entry, select the entry you want to copy and choose
    Edit   Copy as.
    6. Check the entries in the individual fields.
    Result: You have maintained the characteristics of your infotype.
    Please check the above config for maintaining your infotype in PA30 and also check your entries in T582A & S.
    Edited by: Sikindar on Mar 9, 2008 8:23 PM

  • Create support message

    Dear sir,
    we are facing problem while creating support message in solution manger and satellite systems.we have done all the basic settings in SPRO and activated EWA.
    in the satellite system.it is working fine.But while creating support message we are getting the following error message ERROR IN LOCAL MESSAGE SYSTEM
    MESSAGE 009999000014 NOT COMPLETE. in solution manager and satellite system.
    we have refer the following notes 824640,838063.please suggest me.
    Regards,
    Venkat

    Hello Venkat,
    If you are in SOLMAN 4.0 SP9 for solving the problem in SOLMAN apply note
    1011376.
    Which message number did you get in the satellite? please check that the user used in the RFC connection SM_..._BACK in SOLMAN system has roles
    SAP_SUPPDESK_CREATE
    SAP_SV_FDB_NOTIF_BC_ADMIN
    In PFCG make sure that both roles has Authorization and User tabs in green status.
    Hope this helps,
    Dolores

  • STRUST - Error while creating PSE

    Hi all,
    i want to create the PSE for SNC (SAP Cryptolib). -> Webservices with Certificates
    SNC ID:      sys-sapsnc@<domain>.com
    Algorithm:   RSA
    Key Length: 1024
    Error message:
    Error while creating PSE
    Message no. TRUST040
    System: ERP 2005
    System PSE is already created
    SSL Server PSE is already created
    SSL Client (Anonymous) PSE is already created
    SSL Client (Standard) PSE is already created
    regards

    Hi Ralf,
    I think I did something similar with XI about a year ago. You have to create or import some certificates / CA Certificates using STRUST (it depends if you have officially signed certificates or if you are using your own selfsigned certificates. In this case you need the root certificate as well).
    => Note 510007 might be useful
    => When importing your own root CA make sure you choose a valid namespace for Trust Center (starting with Z e.g. ZSELFCA) and choose Root-CA for Category.
    => If you want to view, modify or deltete entries choose menu > certificate > database and you will see a screen where you can search for the entries in the certificate database
    Just in case you have problems with your PSE make a copy of directory /usr/sap/SID/DVEBMGS<XX>/sec
    and delete your existing PSE to create a new one (Carefully!!!
    - First of all make sure you installed SAPSECULIB.
    - After that you should create a new PSE or create new entries for SSL Server (optionally client etc.)
    - You can create an entry directly in TRUST Manager. The resulting certificate will be selfsigned. You can sign
    this cert using your CA and then after having it signed you have to import the certificate response (use openssl to do cert stuff)
    => This might be helpful: http://help.sap.com/saphelp_nw04/helpdata/en/24/61ab3b92818b70e10000000a114084/frameset.htm
    You can import your own certificates from menu > certificate > import in the maintenance section of the SSL Server PSE or you can just click on the "Import Certificate" button
    When done you should check that your generated/imported certificates are working by simple accessing your server using the https protocol (e.g. https://<server>:<sslport>/sap/public/ping should be fine)
    Just in case you used your own CA to sign the certificates your Browser will display popup saying that the certificate is not signed by any known trusted CA (we know that so we can ignore that
    If you want to use client cert authentication you have to repeat the explained steps for SSL Client (Standard)
    => Create the PSE, sign the generated certificate etc., import the certificate response
    When this is all done you should do the following:
    - Create a RFC Destination for HTTPS Communication (call sm59, open the Folder HTTP Connections to External Server)
    - In the destination enter the destination Host and the path of your application
    - After that open the TAB Logon/Security
    - In the Status of Secure Protocol Section choose SSL active and DEFAULT SSL Client (Standard) as SSL Client Certificate
    - Save all your changes
    You should now be able to use this destination for your Webservice communication and it will be encrypted using SSL
    Hope this helps
    If you have further questions let me know
    Cheers

  • ERROR when Trying to create support message in satellite system

    Hi
    I have a wired problem.
    My user's are opening support message in the solman through the ECC system.
    But when a user is open a support message with the component FI he get the following message:
    "Error in Local Message System: Component FI does not exist: Check your entry Message was Not Created"
    I'm working with ECC6 and SOLAMN 4.
    Why I can't generate support message with the component "FI" ?
    Please advice
    Best regards
    Lior Grinberg

    Hi
    SAP Component is FIN Financials not FI that is why I thnk u r getting an error.
    Normal process is
    Whenever your user will post any message from any Transactions of FI module in ECC they goto help->create support message
    This will automatically fill the SAP Component
    Secondly if they are posting from initial logon screen they can choose the value by pressing F4 in SAP component field
    Hope it solves ur problem
    Regards
    Prakhar

  • Service desk error creating support message "help- create support message"

    Hi
    I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
    I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
    Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
    The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
    Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
    In order solve the error I review:
    - The satellite SAP system is at the iBase installed components.
    - I've Assign Number Range for ABA notifications at SLF1 transaction.
    - I've Checked number range for Service Desk Message at SLFN transaction.
    - I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
    - (satellite system) Transaction sm30, table BCOS_CUST:
       Appl.            +       Dest.                                  +                     +
       OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
       TST_CUS                                                        0120009939
       RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
    - (satellite system) I logged with a SAP user with these roles:
      SAP_SUPPDESK_CREATE
      SAP_BC_CUS_CUSTOMIZER  according SAP NOTE 834534
      SAP_BC_CUS_ADMIN       according SAP NOTE 834534
      SAP_SV_FDB_NOTIF_BC_CREATE
      SAP_SV_FDB_NOTIF_BC_ADMIN
      All these roles are mantained.
    - I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
    Please could you help me?
    Thanks and Regards
    Raul

    Hi,
    When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
    system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
    ========================================================================
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Date and Time          10.07.2008 10:17:26
    Short text
        Access via 'NULL' object reference not possible.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: " ").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "OBJECTS_OBJREF_NOT_ASSIGNED" " "
        "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
        "PROFILE_CONTAINS_PARTNERDEP"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
    Information on where terminated
        Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
         in "PROFILE_CONTAINS_PARTNERDEP".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 41
        of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
    =========================================================================
    Thanks and Regards
    Raul

  • ERROR when Trying to Create Support Message in Satillite system

    Hi,
    I have configured Service Desk in solution manager, when i try to send a Support Message(Help ->Create Support Message) from satillite system to Solution Manager i got this ERROR msg. "Error in local message system; message 000000000001 not complete".
    Help me to sort out this.....

    Hey ...I had a same problem last week...
    I'm unable copy the Weblog / upload the document ...Any way follow below steps.
    1)Go To Transaction Code  SPPFCADM in Solution manager
    select DNO_NOTIF and click on 'Define action profile and actions
    Select action profile 'SLFN0001_STANDARD_DNO'
    2)choose action definition 'SLFN0001_STANDARD_DNO_CRM' and click on
    the processing types
    3)delete the container expression ITEM_PRODUCT_ID
    Refer SAP Note 1011376
    Hope this helps you.
    Praveen,

  • Error while creating MV replication group object

    Hi,
    I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
    OEM error
    This error while creating M.V. rep. group object
    There is a table or view named SCOTT.EMP.
    It must be dropped before a materialized view can be created.
    In SQLPLUS
    SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
    Connected.
    SQL>
    SQL> BEGIN
    2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
    3 gname => 'SCOTT',
    4 sname => 'KARTHIK',
    5 oname => 'emp_mv',
    6 type => 'SNAPSHOT',
    7 min_communication => TRUE);
    8 END;
    9 /
    BEGIN
    ERROR at line 1:
    ORA-23306: schema KARTHIK does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
    ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
    ORA-06512: at "SYS.DBMS_REPCAT", line 1332
    ORA-06512: at line 2
    Please not already I have created KARTHIK schema.

    Arthik,
    I think I know what may have happened.
    As I can see you are trying to create support for an updateable materialized view.
    You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
    From the code you have shown, I bet the owner of table EMP is SCOTT.
    From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
    According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
    Please check the documentation at the link below
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
    I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
    I'll skip some of the steps that I used to create the replication environment.
    I have two databases, DB1.world and DB2.world
    On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
    SQL> conn scott/*****@DB2.world
    Connected.
    SQL>create materialized view log on EMP with primary key;
    Materialized view log created.
    SQL>
    SQL>conn repadmin/*****@DB2.world
    Connected.
    SQL>BEGIN
      2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
      3         gname => 'GROUPA',
      4         qualifier => '',
      5         group_comment => '');
      6*   END;
    PL/SQL procedure successfully completed.
    SQL>BEGIN
      2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
      3         gname => 'GROUPA',
      4         type => 'TABLE',
      5         oname => 'EMP',
      6         sname => 'SCOTT',
      7         copy_rows => TRUE,
      8         use_existing_object => TRUE);
      9*   END;
    10  /
    PL/SQL procedure successfully completed.
    SQL> BEGIN
      2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
      3         sname => 'SCOTT',
      4         oname => 'EMP',
      5         type => 'TABLE',
      6         min_communication => TRUE);
      7    END;
      8  /
    PL/SQL procedure successfully completed.
    SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
    PL/SQL procedure successfully completed.
    SQL> select status from dba_repgroup;
    STATUS                                                                         
    NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
    SQL>conn mviewadmin/****@DB1.world
    Connected.
    SQL>   BEGIN
      2       DBMS_REFRESH.MAKE(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => '',
      5         next_date => SYSDATE,
      6         interval => '/*1:Hr*/ sysdate + 1/24',
      7         push_deferred_rpc => TRUE,
      8         refresh_after_errors => TRUE,
      9         parallelism => 1);
    10    END;
    11  /
    PL/SQL procedure successfully completed.
    SQL>   BEGIN
      3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
      5         gname => 'GROUPA',
      7         master => 'DB2.wolrd',
      9         propagation_mode => 'ASYNCHRONOUS');
    11    END;
    12  /
    PL/SQL procedure successfully completed.
    SQL>conn myuser/*****@DB1.world
    Connected.
    SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
      2    REFRESH FAST
      3    FOR UPDATE
      4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
      5*      FROM   [email protected];
    Materialized view created.
    SQL>conn mviewadmin/******@DB1.world
    Connected.
    SQL> BEGIN
      2       DBMS_REFRESH.ADD(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => 'MYUSER.EMP_MV',
      5         lax => TRUE);
      6    END;
      7  /
    PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
    SQL>   BEGIN
      2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
      3         gname => 'GROUPA',
      4         sname => 'MYUSER',
      5         oname => 'EMP_MV',
      6         type => 'SNAPSHOT',
      7         min_communication => TRUE);
      8    END;
      9  /
      BEGIN
    ERROR at line 1:
    ORA-23306: schema MYUSER does not exist
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
    ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
    ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
    ORA-06512: at "SYS.DBMS_REPCAT", line 1332
    ORA-06512: at line 3 I reproduced exactly the same error message.
    So the problem is clearly in the schema name that owns the materialized view.
    Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
    SQL>conn scott/****@DB1.world
    Connected.
    SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
      2    REFRESH FAST
      3    FOR UPDATE
      4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
      5*      FROM   [email protected];
    Materialized view created.
    SQL>conn mviewadmin/******@DB1.world
    Connected.
    SQL> BEGIN
      2       DBMS_REFRESH.ADD(
      3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
      4         list => 'SCOTT.EMP_MV',
      5         lax => TRUE);
      6    END;
      7  /
    PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
    SQL>   BEGIN
      2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
      3         gname => 'GROUPA',
      4         sname => 'SCOTT',
      5         oname => 'EMP_MV',
      6         type => 'SNAPSHOT',
      7         min_communication => TRUE);
      8    END;
    PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
    -- Mihajlo
    Message was edited by:
    tekicora

Maybe you are looking for

  • Display icons in ALV LVC grid

    Hi experts, Iam trying to display icons in one of the columns in my ALV grid. I have created ITAB like this. type-pools : icon,slis. data: begin of gt_dtl occurs 0,       range(4).         include structure zbitrdtl. data: field_style type lvc_t_styl

  • My ipad wont turn on, and reset does not work

    My put my ipad to sleep and had just fully charged it - About an hour later went to wake it up and wont turn on. It also wont charge, nor is itunes recognising it. I have tried the reset function by holding down the home and sleep buttons (and have t

  • Spreadsheet file will not open

    cannot open an AppleWorks6 spreadsheet file message said "file is damaged"

  • Yosemite is a really bad upgrade

    Since installing Yosemite my daughter thinks that I have a new game  on the PC as the spinning beach ball appears to be a permanent feature.I truly wish I had not bothered

  • Keynote freezes, requires Force Quit, and resets my hot corners?!

    I wonder if anyone else is having the same problem. I'll be either rehearsing or running a presentation, and the slide or build won't progress. The screen is frozen and the only way out is cmd-opt-esc, which force quits the app. Unlike others on the