Error while creating table 'EDISEGMENT' entry '/BIC/CIEB0ASSET_ATTR'

Hi All,
I'm getting this error while activating transfer rules for 0ASSET.
I referred previous solutions in the forum, by which it was clear that i need to delete entries from 'EDISEGMENT' table.
I used SAP note : 493422, by which i could table entries in 'EDISEGMENT', by using Z_RS_SCRSYSTEM_R3_CHECK.
But activating the transfer rules gives me similar error, and again an entry is created in 'EDISEGMENT'.
I guess this is because i need to delete these entires from EDSAPPL table? I'm not able to delete its entries.
Please suggest.
I also created similar program in R/3. I executed it, but it couldnt find any inconsistencies.
Also let me know I'm proceeding the right direction so far.
Thank you,
Ketan

There are a couple of ways to delete data out of SAP delivered tables in R3/ECC:
1) If the table has a maintenance screen generated for it, you can go to tcode SM30 and update the table. To determine if a maintenance screen exists for the table, go to tcode SE11 or SE12, make sure the Database Table radio button is selection, enter the table name and click on Display. Select the menu path Utilities > Table Maintenance Generator. If the following screen has entries in the Authorization Group, Function Group and Maint. Screen No. fields, a maintenance screen exists and tcode SM30 can be used to update the table, as long as you have authorization to do so.
2) Create an ABAP program to delete data from the table. This in not a recommended approach in this case bacause this is an SAP delivered table and SAP frowns on direct table updates being done to R3/ECC tables that they delivered. If this were a custom table (beginning with Z* or Y*), then direct table updates are no issue.
3) Have the client opened and delete the rows of data from the table in tcode SE16.

Similar Messages

Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR

While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thanks

steve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj.

Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'

Hi experts,
when I import my transport request to QA, I am getting this error
"Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
the performance assistance reads as below..
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
System response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have an entry for '/BIC/CIWA0TRZONE_TEXT' in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
thanks in advance
D Bret

Hi,
can you please be more precise with your enquiry?
As far as I read the note, it is quite explanatory....
What is your source system release?
You'll need to implement this prog in your source system and execute it there.
If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
does it answer your question
Olivier.

Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'

When I am activating the transfer rules of 0divison_text giving me the error
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists.
I have checked the note 493422 but I did not understand it can any one help me in this
I am working on 7.o with SP SAPKW70010

Hi Priya,
Delete entries for the data source in ROOSGEN, EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
Try activating the infosource again. This should solve your problem.
Sasi

Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'

Hello,
I get the error message:
"Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
Many other transfer structures work fine, but this one is really problematic.
Has anyone seen it before? What do i do to solve it?
Regards,
F C

Hi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth

Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'

Hi All,
I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate as the number of transfer rules with this issue are huge in number.
Please suggest the suitable solution
Thank you in advance
krishna
Edited by: krishna dvs on Feb 17, 2009 1:24 PM

Hi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth

Error while creating table 'EDISEGMENT' entry for Transfer Structures

Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
G

Hi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar.

Error while creating table 'EDISEGMENT' entry

Hi i have this error when i try to activate transfer rules for some objects in BI, i find some tips for solve this issue, and i know that a good way to solve this is delete entries for the data source not only on ROOSGEN, but also on EDISEGMENT and EDSAPPL tables, both on ECC and BI sides....
Now... i got it.......... but i want to know if it could cause some problems in my infocubes and DSO, most of them, are using this objects and if the object is deleted and created again from BC i would have to reactivate everything again ...is this correct???
Regards

Yes, apart from that if the cubes have any other dependencies like multiprovider and infoset you need to alter/adjust them and activate them . Some cubes may become inconsistent while you upload if the older infoobjects and the newer ones are having different infoobject definition.

Error: "Error while creating table 'EDISEGMENT'"

Hi,
When I activate a Transfer Rule return the following error:
Error while creating table 'EDISEGMENT'
Someone has passed the problem?

Bom dia Marques,
Na SAP Note 339957 tem o síntoma descrito por você.
Solução:
In the system where the error occurs (usually the OLTP), create and run the report RS_CHECK_TS_EDISEGMENT (with SENDING and RECEIVING LOGSYS as an entry).
Entretanto esta nota foi substituida pela SAP Note 493422, com bem mais detalhes e indica um programa Z
Atenciosamente,
Fernando Da Rós
PS: Fórum em português.

Source sys Restore "error while creating table EDISEGMENT "

Dear All,
I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
We have done all BW refresh steps as per guide and during Restore of source system we
are getting errors during datasource activation as " error while creating table EDISEGMENT ".
we have checked RFC and Partner profiles and working fine.
We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
source system we are getting above mentioned error.
We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
those apply to our OLTP system , as one source system from same OLTP system got
successfully activated and source system for other client giving this issue .
Please help us out with this problem.
we are running on BI 7.0 platform and ECC 6.0 for source.
Regards,
Rr

check the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
hope this helps
regards
santosh

Erro: "Error while creating table 'EDISEGMENT'"

Pessoal bom dia,
quando eu vou Ativar uma Regra de Transferência retona o seguinte erro:
Error while creating table 'EDISEGMENT'
não estou conseguindo desvendar o que pode ser isto, e a regra não ativa de jeito nenhum.
Alguém já passou pelo problema?

Please post this in the Portuguese Forum...
Regards
Juan

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Dbms_xmlschema.registerschema, (ORA-31084: error while creating table )..

Hello,
I have some problems with dbms_xmlschema.registerschema
My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
After
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8'));
commit;
end;I get:
ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
ORA-06512: at line 4
What I'am doing wrong or what is the reason for this error..

Arrgghhh.....
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8')
    , local => true
, genTypes => false
, genTables => false);
commit;
end;sorry...

Error while creating table

Hi,
I am getting an error while creating a table,
create table cs_temp_xml_data as select rowid RW_ID, value(d).getClobVal() xml_value FROM cs_tmp_wcl_xml_data p,table(xmlsequence(extract(p.xml_data,'/records/record'))) d ;
Here cs_tmp_wcl_xml_data contains a data of 600 mb in oracle directory
ORA-04030: out of process memory when trying to allocate 4000 bytes (qmxlu subheap,qmemNextBuf:alloc)
Can anyone help me out regarding this error?

check out metalink doc: 543239.996
also bug 3436395.

Error while creating table from csv file

I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea?

I am getting an error while creating a table using 'Import Data' button for a csv file containing 22 columns and 8 rows. For primary key, I am using an existing column 'Line' and 'Not generated' options.
ORA-20001: Excel load run ddl error: drop table "RESTORE" ORA-00942: table or view does not exist ORA-20001: Excel load run ddl error: create table "RESTORE" ( "LINE" NUMBER, "PHASE" VARCHAR2(30), "RDC_MEDIA_ID" VARCHAR2(30), "CLIENT_MEDIA_LABEL" VARCHAR2(30), "MEDIA_TYPE" VARCHAR2(30), "SIZE_GB" NUMBER, "RDC_IMG_HD_A" NUMBER, "START_TECH" VARCHAR2(30), "CREATE_DATE" VARCHAR2(30), "RDC_MEDIA_DEST" VARCHAR2(30), "POD" NUMBER, "TAPE" NUMBER, "ERRORS_YN" VA
Any idea?

Error while creating table 'EDISEGMENT' entry '/BIC/CIEB0ASSET_ATTR'

Similar Messages

Maybe you are looking for