Error while creating table maintenance generator
Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi
Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.
Similar Messages
-
Problem while creating table maintenance generator using two step
Hello All,
I have created a Z table in which I have 7 fields, out of which 6 are character fields and 7th field is of type INT4
Now when I create the maintenance generator using TWO STEP approach, the 7th field i.e., of type INT4 is not available in the first screen (the table control screen). This screen only has 6 fields for display.
But when I click NEW ENTRIES button, I get the next screen which has all the 7 fields.
But if I create the maintenance generator using SINGLE STEP, all 7 fields are displayed in the first screen.
Please suggest. Let me know if you require some more explaination.
Thanks & Regards,
TarunHi Tarun,
Go to the layout and increase the size of the Screen. or at the screen attributes change the length and width values.
You know that initially the screen occupies default size only.
Hope this would serve your purpose.
Cheerz
Ram -
Error while creating table maintainence generator !
Hi All ,
I want to create a table maintainence generator for table ZZFTLPNT . However I am getting the following error :
Typ Message text LTxt
Field ZZZFTLPNT-RRCTY shortened (new visible length: 000015)
Field ZZZFTLPNT-DRCRK shortened (new visible length: 000015)
Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000009)
Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000009)
Field ZZZFTLPNT-RRCTY shortened (new visible length: 000007)
Field ZZZFTLPNT-DRCRK shortened (new visible length: 000007)
Field ZZZFTLPNT-ROBJNR shortened (new visible length: 000004)
Field ZZZFTLPNT-SOBJNR shortened (new visible length: 000004)
Field ZZZFTLPNT-RRCTY shortened (new visible length: 000003)
Screen SAPLZZZFTLPNT 0001 could not be gene
Memory for screen LOAD is used up. bytes) is not
Please advise .Hi Pankaj
it is "Display/Maintenace allowed" and delivery class is 'A' .
Edited by: Ambar Patil on Dec 9, 2008 11:59 AM
Edited by: Ambar Patil on Dec 9, 2008 12:01 PM -
Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR
While loading master data for 0PLANT, its giving me following error.
"error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
Please help me out.
Thankssteve,
Can you give the solution you used to correct this problem?
This error occurred in BW during import.
Raj. -
How to create table maintenance generator?
Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
DastagiriHi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully. -
Source sys Restore "error while creating table EDISEGMENT "
Dear All,
I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
We have done all BW refresh steps as per guide and during Restore of source system we
are getting errors during datasource activation as " error while creating table EDISEGMENT ".
we have checked RFC and Partner profiles and working fine.
We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
source system we are getting above mentioned error.
We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
those apply to our OLTP system , as one source system from same OLTP system got
successfully activated and source system for other client giving this issue .
Please help us out with this problem.
we are running on BI 7.0 platform and ECC 6.0 for source.
Regards,
Rrcheck the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
hope this helps
regards
santosh -
Erro: "Error while creating table 'EDISEGMENT'"
Pessoal bom dia,
quando eu vou Ativar uma Regra de Transferência retona o seguinte erro:
Error while creating table 'EDISEGMENT'
não estou conseguindo desvendar o que pode ser isto, e a regra não ativa de jeito nenhum.
Alguém já passou pelo problema?Please post this in the Portuguese Forum...
Regards
Juan -
Error: "Error while creating table 'EDISEGMENT'"
Hi,
When I activate a Transfer Rule return the following error:
Error while creating table 'EDISEGMENT'
Someone has passed the problem?Bom dia Marques,
Na SAP Note 339957 tem o síntoma descrito por você.
Solução:
In the system where the error occurs (usually the OLTP), create and run the report RS_CHECK_TS_EDISEGMENT (with SENDING and RECEIVING LOGSYS as an entry).
Entretanto esta nota foi substituida pela SAP Note 493422, com bem mais detalhes e indica um programa Z
Atenciosamente,
Fernando Da Rós
PS: Fórum em português. -
Error while creating table 'EDISEGMENT' entry for Transfer Structures
Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
GHi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'
Hi All,
I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate as the number of transfer rules with this issue are huge in number.
Please suggest the suitable solution
Thank you in advance
krishna
Edited by: krishna dvs on Feb 17, 2009 1:24 PMHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'
Hi experts,
when I import my transport request to QA, I am getting this error
"Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
the performance assistance reads as below..
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
System response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have an entry for '/BIC/CIWA0TRZONE_TEXT' in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
thanks in advance
D BretHi,
can you please be more precise with your enquiry?
As far as I read the note, it is quite explanatory....
What is your source system release?
You'll need to implement this prog in your source system and execute it there.
If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
does it answer your question
Olivier. -
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
When I am activating the transfer rules of 0divison_text giving me the error
Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists.
I have checked the note 493422 but I did not understand it can any one help me in this
I am working on 7.o with SP SAPKW70010Hi Priya,
Delete entries for the data source in ROOSGEN, EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
Try activating the infosource again. This should solve your problem.
Sasi -
Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'
Hello,
I get the error message:
"Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
Many other transfer structures work fine, but this one is really problematic.
Has anyone seen it before? What do i do to solve it?
Regards,
F CHi,
Please check the note 493422. The reports listed in the note
should correct the inconsistencies and afterwards you can re-import the
request and it should then work.
Regards,
Srikanth -
Hello,
I have some problems with dbms_xmlschema.registerschema
My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
After
begin
DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
dbms_xmlschema.registerschema(
schemaurl => 'http://localhost/TEST1.XSD',
schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
csid => nls_charset_id('AL32UTF8'));
commit;
end;I get:
ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
ORA-06512: at line 4
What I'am doing wrong or what is the reason for this error..Arrgghhh.....
begin
DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
dbms_xmlschema.registerschema(
schemaurl => 'http://localhost/TEST1.XSD',
schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
csid => nls_charset_id('AL32UTF8')
, local => true
, genTypes => false
, genTables => false);
commit;
end;sorry... -
Objects created when creating table maintenance generator
Hi guru's,
I heard that when we creating a table maintenance generator for a table, it will create view,search help and some else.Is it true?
Please tell me what objects will be created when we create table maintenance generator for a table and why? what is the exact use of creating table maintenance generator for a
table other than reduces the time for entering large volume of data.
Regards,
Rakesh.Hello Rakesh,
TMG is a tool meant and designed to maintain Customizing table/views. Customizing essentially means, that the data should be transportable across clients/systems.
All this, and the facility to maintain data (display, edit, create, delete, translate) is provided by the TMG. When you make the changes like above, the TMG also provides you features to automatically also enter the changes into transport requests.
Coming to what objects are created when you generate a maintenance dialogue -
1) A Customizing Object (merely a class C/G table or view does not become a
customizing object)
2) A function group (as entered in SE54 details, if the function group does not already
exist)
3) Lot of coding within the function group (Func modules, subroutines, includes)
4) Screen(s) (1 or 2, depending on a setting in the TMG)
5) An automatic recording of all these objects into a transport request, for you to conveniently ship them to other systems in your landscape (this, if automatic recording is
switched ON in your system)
Authorization group - It is not created automatically (unlike function group). You need to specify an existing Auth group, or use a different functionality to create on of your requirements.
Does this answer most of your questions? Please revert if you need more clarifications.
Regards
Rekha
PS: Actually, why dont you try generating a maintenance dialogue for a sample z-table and see what all gets generated?
Maybe you are looking for
-
Send message windows doesn't close after sending attached PDF from Acrobat
I have several forms that I have created in Acrobat 9 Pro. These forms have a button set to submit to an email address. After filling out the form, and clicking on the submit button some, but not all, of users with Outlook 2007 are having a problem w
-
I am desperate 4any help on this issue...seems 2b a lemon not an apple
-
DataGrid and XML with only 1 entry
Hi All, I have a datagrid set up that is displaying an xml file. Seems to work fine until there is only 1 entry in my xml file, then I get no content displayed in the datagrid. Here is my code that I am using for my app, <?xml version="1.0" encoding=
-
What happens to the cube performance when you have too many UDAs?
Hi, what's the impact on the cube performance if you have too many UDAs associated with the same level of members? Let's say 15 UDAs for each member If attribute is not an option, what's another way to help alleviate the data load?
-
Building block Configuration Guides
Hi experts: I am having hard time searching for these documents. Is there any methodical way. I am looking for Buliding Block Configuration guides for SNP and PP/DS Please provide me the links and also tell me how i can find these links. Thanks Stev