Error while determining the form function module

Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
Sophie

Viktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie

Similar Messages

Travel Display Form: Error while determining the form function module

Hi,
In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
"Error while determining the form function module"
Can anyone have idea on this?
Regards,
Boobalan

Hi,
This error was due to Not supported platforms of ADS (Adobe Document services)
It was not supported on itanium64 bit processors.
Please check where the ADS is supported in service.sap.com/pam
You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
Please refer the ADS Config Doc for details.
Hope you also solve this problem.
Regards,
Boobalan

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Error while Testing the Inbound Function Module

Hi,
I have created a Z Function Module (Posting Program) for Testing the EDI Shipment Tender Status. When I try to process the IDoc with the Transaction WE19 and when I enter the name of the Z function Module , it gives me an error saying that "Interface for Function Zxxxx is incorrect". Can somebody give me a solution for this? Answer would attract reward points.
Thanks,
Venkat.

Hi,
You need to register this Function Module against Message Type.
Transaction code is : WE57.
Nilesh

Error While including the Multisite functionality

Error While including the Multisite functionality & trying to click on SiteAdministraion tab in BCC
Background: We have migrated our application from ATG v9.1 to ATG v 10.0.2 and implementing Multisite on the same
Getting this error on BCC console:
12:55:36,893 INFO [ServerImpl] JBoss (Microcontainer) [5.0.0.GA (build: SVNTag=JBPAPP_5_0_0_GA date=200910202128)] Started in 2m:44s:727ms
12:57:24,234 ERROR [SiteAdminActivitySource] The acl for the custom workflow activity named siteadmin.manageSiteAssets is invalid. This activity will not be available.
atg.security.InvalidPersonaException: Profile$role$siteAdminUser
at atg.security.AccessControlListParser.setPersona(AccessControlListParser.java:239)
at atg.security.AccessControlListParser.parseAce(AccessControlListParser.java:277)
at atg.security.AccessControlListParser.parse(AccessControlListParser.java:193)
Thanks in Anticipation1

Hello Sudheer,
Increasing the Swap space is the only thing i noticed in all SAP Notes for your problem.
Configure more swapspace please and restart the installation.
Regards,
Siddhesh

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error while determining the currency types for PO

Hi,
When running MR11 on PO4534356339 (account maintenance) the following error msg appears:
Error while determining the currency types for 4534356339 00030.
Message no.C+171
Check the configuration.
I have checked all currency settings and found ok. Material ledger is activated for this plant. It looks like there is problem in Item 30 of the Purchase order is having problem.
Best Regards,
MR

Hi,
Please refer this link :
MR11 error - Error while determining currency type - C+, 171!!!
Regards,
Pramitha.

Error while testing the form

Hi,
I am getting the following error while testing the Webform "ref: 10OZcTRWdS2gJf9A1t0bQ, AccessControlViolation"
An error has occurred.
The form does not exist. Please re-enter the web address as the link may be misspelled.
[ref: 10OZcTRWdS2gJf9A1t0bQ, AccessControlViolation]
Kindly help.

Did you try to test again? The error happens sometimes when the new forms has just been created and FormsCentral hasn't saved the form yet. Please let me know if you have created some contents in the form and you still cannot test it.
Thanks,
Wenlan

Error in calling the Remote Function Module

Hi all,
I am trying to call the Remote function Module which is in CRM from ECC .
But we are not able to detect the function module as it is showing the error as Function Module not found.
Can anybody help us in calling the Remote Function Module .
Regards,
Madhavi

Please check the foll 2 things :
RFC radio button clicked in se37 for that FM
RFC connection established with the remote server in SM59
Thanks

Error While Running the form 10g

Hi,
I have a prob while running the form.
Since the day I installed Form 10g at my home pc. Every time after i make any changes in the form, if i try to run the form after compiling and saving. It keeps asking me to enter scott/tiger@anthony to run the form.
Even after running the form if i close it and to run the form again i have to enter scott/tiger@anthony.
Wht culd be the prob plz help ?
Rgds
Anthony J
Hi,
I have all my tables in the scott schema also b4 running the form for the 1st time I do connect to the database thru File -> connect.
Plz confirm what shld be the setting the preference option in the menu.
Message was edited by:
Anthony J

Do you have a logon statement in the ON-LOGON trigger in your form? Do that, and it won't ask you to logon each time you run the form.
Also make sure you connect to the database in Forms Builder by going to File -> Connect...

RFC Error While Invoking A Remote Function Module.

I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.

Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can ping or test your JCO connections. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to Visual Admin -> Server -> Services -> Deploy ->

Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas.

Getting Error while opening the form

Hi All,
I am getting error "Frm - 10102: Can not attach PL/SQL library d2kwutil.pll.This library attachment will be lost if the module is saved". Please advise.
Thanks,
Tandra

We are using win_api_environment.Get_Connect_String function.
One more problem i have.I am not able to run the form like when i am running the form, the form is getting closed. I am using Oracle AS Form services to run the form. I have started OC4J Instance.
Can you please suggest what steps i need to do in order to run a form in 10g?

Compilation error while generating the form in linux

Hello everyone,
I am using Oracle Designer ver10.1.2.4 in windows to generate the forms with standard object library ofgwebol.olb and template form ofgwebt.fmb. form (with both .fmb and .fmx files) are generated without errors. Also when I open the forms in separately they compiles without errors. But when I copy the same .fmb file into linux enviroment and compile it using frmcmp.sh userid=user/password@database module_type=form compile_all=yes module=form_name it gives following errors.
$> frmcmp.sh userid=odin/odin@ontw10g module_ty
pe=form compile_all=yes module=LOGIN_SCHERM
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
FRM-18108: Failed to load the following objects.
Source Module:ofgwebol.olb
Source Object: CGSO$CHAR_DO
Source Module:ofgwebol.olb
Source Object: CGSO$CHAR_DO
Source Module:ofgwebol.olb
Source Object: CGSO$BLOCK
Source Module:ofgwebol.olb
Source Object: CGSO$CANVAS
Source Module:ofgwebol.olb
Source Object: CGSO$WINDOW
Compiling function CGTE$CHECK_CONSTRAINT_VIO...
No compilation errors.
Compiling procedure CGTE$INLOGGEN_ERRORS...
No compilation errors.
L/SQL ERROR 0 at line 17, column 3
Statement ignored
PL/SQL ERROR 201 at line 36, column 3
identifier 'CGNV$.NAV_CLOSE_FORMS' must be declared
PL/SQL ERROR 0 at line 36, column 3
Statement ignored
PL/SQL ERROR 201 at line 37, column 3
identifier 'CGNV$.NAV_OPENING_WND' must be declared
PL/SQL ERROR 0 at line 37, column 3
Statement ignored
Compiling KEY-HELP trigger on form...
No compilation errors.
Compiling WHEN-WINDOW-ACTIVATED trigger on form...
Compilation error on WHEN-WINDOW-ACTIVATED trigger on form:
PL/SQL ERROR 201 at line 6, column 8
identifier 'CGNV$GET_ITEM_WINDOW' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling POST-TEXT-ITEM trigger on form...
Compilation error on POST-TEXT-ITEM trigger on form:
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$.STORE_WND_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling WHEN-WINDOW-CLOSED trigger on form...
Compilation error on WHEN-WINDOW-CLOSED trigger on form:
PL/SQL ERROR 201 at line 5, column 3
identifier 'CGNV$.TERMINATE_WINDOW' must be declared
PL/SQL ERROR 0 at line 5, column 3
Statement ignored
Compiling WHEN-FORM-NAVIGATE trigger on form...
Compilation error on WHEN-FORM-NAVIGATE trigger on form:
PL/SQL ERROR 201 at line 3, column 3
identifier 'CGNV$.REMOVE_CHILD_FORM' must be declared
PL/SQL ERROR 0 at line 3, column 3
Statement ignored
Compiling KEY-EXIT trigger on form...
Compilation error on KEY-EXIT trigger on form:
PL/SQL ERROR 201 at line 5, column 3
identifier 'CGNV$.NAV_ENTER_QUERY' must be declared
PL/SQL ERROR 0 at line 5, column 3
Statement ignored
PL/SQL ERROR 201 at line 9, column 5
identifier 'CGNV$.CLOSE_ALL_WINDOWS' must be declared
PL/SQL ERROR 0 at line 9, column 5
Statement ignored
Compiling KEY-CLRFRM trigger on form...
No compilation errors.
Compiling ON-ERROR trigger on INLOGGEN data block...
No compilation errors.
Compiling KEY-PREV-ITEM trigger on AGB_ID item in INLOGGEN data block...
Compilation error on KEY-PREV-ITEM trigger on AGB_ID item in INLOGGEN data block
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$GO_PREV_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compiling KEY-NEXT-ITEM trigger on AGB_NAAM item in INLOGGEN data block...
Compilation error on KEY-NEXT-ITEM trigger on AGB_NAAM item in INLOGGEN data blo
ck:
PL/SQL ERROR 201 at line 4, column 3
identifier 'CGNV$GO_NEXT_ITEM' must be declared
PL/SQL ERROR 0 at line 4, column 3
Statement ignored
Compilation errors have occurred.
Form not created
I think some standard library are missing in Linux environment. But I do not know the name of them and neither I can find. Please suggest the what need to be done to resolve the problem. The reason I am compiling the form in Linux is that I can run the form in windows because of corrupted installation of OC4j.
Thanking you all much in advance.
Edited by: Deepank on Dec 2, 2008 1:49 AM

Deepank-
When generating forms from Designer, Designer attaches libraries - like ofgmes.pll, ofgnavl.pll, etc. You will need to copy these libraries to the same directory where your forms reside on your Linux box. To find out what libraries ate attached to your form, open it on your windows PC after generating it from Designer and you will see the attached libraries. Also, watch out for the case-sensitivity of Linux. If you have the Designer libraries on your linux box and you still get errors, try changing the case of the names of the libraries.
Hope this helps,
Dan

Error while using the 'Form and Report' wizard

Hello,
I’m trying to create a form and report on EMP, using the APEX wizards, but I’m getting the following error message:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_SHORTCUT_IDX1) violated
This is something local, on my APEX instance only, but any ideas what is wrong here?
Thanks,
Arie.

Hi Scott,
>> Do you happen to know where that PL/SQL shortcut came from? Created by you or an apex wizard?
The original shortcut was probably created by an APEX wizard, but then I changed its type to ‘PL/SQL Function Body’. The shortcuts are not included in the translatable components, so I need a function to determine the application language, and issue the message accordingly.
>> The type of the shortcut is not part of that constraint
So changing the shortcut type back to the type I need, after the wizard finished its job, should not have any side effects. Correct?
>> and the sequence always seems to be 1
And we don’t have access to it, so we can’t change it manually.
>> Our bug
Can you please fill a bug report on that?
I will post an enhancement request about including shortcuts in the translatable components, but I’ll appreciate you mention this issue also.
Appreciate your time and efforts,
Arie.

Error while determining the form function module

Similar Messages

Maybe you are looking for