Error while doing Consignment and pipeline settlement

Hi All,
While doing the Consignment and pipeline settlement (MRKO), getting the massage as "It was possible to determine any tax information" and hence no FI documents has been generated.
What could be the reason for this error message?
Thank you,
Shwetha

Hi
Kindly maintain the tax code in the  purchase info record through (ME11 / ME12 for change) under "Purch. Org. Data 1" tab.
Even thou,  0% tax applicable also, you have to maintain the 0% input tax code
Regards
Anilkumar

Similar Messages

  • Consignment and pipeline settlement error

    Hi Expert!
    I have error when processing consignment and pipeline settlement for company code 4424. The error is "No message was found for partner 146073/company code 4424". Can anyone tell me what has going wrong and how to solve it?
    Thanks.

    HI,
    The MRKO Transaction only for settling the Pipe line and Consigmnet pscenarions.
    No effect if u maintain as like that.
    If u have doubt do one in Devlopmet.
    Regards,
    Andra

  • Consignment and Pipeline Settlement - MRKO

    Hi All,
    Is there any way to remove Zero and Negative values from 'Consignment and Pipeline Settlement' (MRKO). I am having material documents with Zero and Negative values and when I tried to Settle them, so that would not appear next time in the list, getting error "Zero value in amount is not allowed". Is there any way I can delete them so that these record will not appear in MRKO.
    Thanks
    Anil

    Hi Anil,
    How you are getting ZERO and Negative Vale for consignment?
    Consignment settlement will happens after withdrawal of goods or after Sales based on your Consignment Purchase Info record.
    Bye,
    Muralidhara

  • ArchiveLink - MRKO - Consignment and Pipeline Settlement

    Hi All,
    how can I configure ArchiveLink to be able to insert bar code when I settle an invoice? I'm refering to transaction OAC5. Is it possible or is it a background process when MRKO creates the FI document?
    Many thanks.
    Luca

    Hi,
    Go to SPRO - Materials Management -- Logistics Invoice Verification -- Message Determination -- Maintain Conditions. Then choose Create condition: Invoice verification.
    Enter output type: KONS (Consignment)then click on key combination or just click enter.
    select company code...then create condition record by entering your company code, function - VN, medium, date/time and language. Then select the record and click on communication method and maintain the required entries like output device and save the condition record.
    Then go to Tcode: MRKO and execute.
    Hope this is clear and helps.
    Thanks,
    Viswanath

  • "upadte was terminated " is the error while doing picking and its not saved

    hi experts,
    I have created a sales order. for that i created a deliery.then i created shipment .and i have put pick qty and batch.
    it gives a message Express document " Updated was terminated "received from author XXXX.
    and picking is not saved and i'm not able to do PGI.
    Please help me.....
    Thanks in advance,
    ria

    Hi Ria,
    Go to SM13 then select your error and double click it, it will show the error description. with the help of this you can trace the source of the error.
    Mostly the update error occurs due to the parameter not being passed.
    Regards,
    Karthik.

  • Consignment and pipeline settlement

    Hi Gurus,
               When we executed MRKO the below screen shot we are getting , here we have material document number its fine, and we have Doc. no column, the document number if we double click its not displaying and if we see in FB03 also its not displaying. Each time its generating new number . Could you please explain about the functionality of this? and where can we see this document number?
    Regds
    Chandra

    Hi Dev,
            Thanks for your reply...
    We are executing with Settle radio buttion , each time we execute new document number is generating(2xxxxxxxxx) . if we go to FB03 then system is saying no document found.  We opending material document number in MB03 and then click on Accounting documents then we found accoutning document number with 3xxxxxxxx and can be displayed. But in MRKO its generating with 2xxxxxxx , each time number is increasing.
    Please find the screen shot
    Regds
    Chandra

  • Error while doing AIAB Settlement

    Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
    Data for determination of capitalization not managed in area 01
    Message no. AW507
    Diagnosis
    You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
    Procedure
    Choose a different depreciation area.
    Thanks
    KC

    Hi,
    This message could be helpful:
    Error AW507
    Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
    In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
    regards Bernhard

  • Error while doing AUC Settlement in KO88

    Hi
    I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
    Define a settlement cost element for receiver type FXA
    Message no. KD506
    Diagnosis
    In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
    Procedure
    Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
    Please help me
    Thanks
    Kishore

    Please check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
    regards
    Ranjan

  • Error while doing settlement from WBS to P&L Account

    Hello
    I am trying to do a settlement from WBS to P&L Account(Expense account). In this case, "Dummy" Prof Ctr is getting derived from 0KE5 (we have maintained a dummy prof ctr). We have set the validations to disallow any postings/settlements to dummy prof ctr. Hence I am getting an error while doing settlement.
    Now I am maintaning a Prof ctr in my WBS master data. I am unable to understand why system is deriving dummy prof ctr and not the one maintained on WBS master data. The settlements are working fine when I do them against Balance sheet accounts and proper prof ctr is getting derived, which is being maintained on WBS master data. I am getting trouble only while doing settlement to my P&lL i.e. expense accounts.
    can anyone throw some light on this?
    Thks
    Sarang

    Dear Sarang,
    You have maintained profit center in WBS master which is not updated at the time settlement to FI that what makes you worried. If you are making FI posting and give WBS as an additional account assignment then Profit center in WBS master will be updated. Here in settlement WBS is sender not the receiver so that profit center will not be updated. In settlement receiver (any) is debited and sender (WBS) is credited so this credit entry will be updated in profit center.
    To your second query that when you carry out settlement to balance sheet account right profit center is updated then please make sure, that balance sheet account is maintained in 3KEH with profit center or OKB9.
    Your P&L account (expense) receives dummy profit center because it is not able to find cost center which can fetch profit center from the master. So, if you can afford, maintain that cost elements (expense account) with profit center in OKB9.
    might help you..........................................................

  • Error while doing settlement

    Hi,
    I am getting the below error while doing the settelment
    Program Errors: no COBRB found 001
    Kindly advice me
    Thanks
    Supriya

    Hi Supriya,
    COBRB is table for Settlement Rules for Order Settlement. Debug if the Table itself is missing or table contains no entries to be picked up for settlement...
    Pls revert back with update...
    Srikanth Munnaluri

  • Error While doing KO88

    Hi All
    While doing KO88 (internal order settlement from AUC to Asset ) getting the error saying, Even though all the GL are maintained
    Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01
    Message no. AU133
    Diagnosis
    When creating the accounting document, the system could not find account 'Acc.dep. accnt.for ordinary depreciation' in depreciation area 01 for company code 5100.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    Best Regards

    Hi
    It would depend on the settings made by you in the depn. areas .
    Step 1 : Execute the T code ORFA - Navigate to Depriciation - ordinary depn. - Assign accounts
    Step  2 :You can navigate as follows - ORFA - Valuation - Depriciation areas - define dep. areas . ( Define depn. areas ) .
    Here you need to check the field - POST TO GL ACCOUNT , if it is not ZERO '0' then the sytem would post the depn. and would require account determination for the same .
    Thanks Regards
    Praveen P C

  • Error while doing ABGL Asset Credit Memo

    Hi Friends,
    I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
    Balance for transaction type group 10 negative for the area 01
    Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
    Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
    If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
    Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
    Thanks
    Sunil

    Hi,
    If the asset has been capitalized during earlier years, use ABGF to post credit memo.  ABGL is meant for assets capitalized during the year.
    Best Regards,
    Madhu

  • Error while doing "Visulaize Plan"

    Hi,
    Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
    I was able to run "Explain Plan" successfully.
    I am on HANA revision 60.
    I saved above error log and the log information is given below:
    I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
    I gone through various blogs related to Visulaization Plan but not found related to this issue.
    <Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
    <SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
    FROM "_SYS_BIC"."raj/AN_VIZ"
    GROUP BY KOKRS, BELNR, PERIO]]></SQL>
    <CompileTime>
      <Start Unit="us">1401281467643661</Start>
      <End Unit="us">1401281467658329</End>
    </CompileTime>
    <RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
      <Name>Project</Name>
      <ExecutionType>Row Search</ExecutionType>
      <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
      <Location>hanasp7:30003</Location>
      <EstimatedCost>
       <Exclusive Unit="us">2.12902e+06</Exclusive>
       <Inclusive Unit="us">2.64021e+06</Inclusive>
      </EstimatedCost>
      <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
      <Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0)  __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0)  __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0)  __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3)  __typecast__() ....... [23]:076:<10/12 (16B)>:
      /1/ Fixed16(18, 3)  __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>: 
         /1/ void*  \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
         /2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
         /3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
         /4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>: 
      /2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
      /3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
      <Child ID="ID_8" >
      </Child>
    </RootRelation>
    <Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
      <Name>Column Search</Name>
      <ExecutionType>Column Search</ExecutionType>
      <Summary><![CDATA[Aggregation on a single table]]></Summary>
      <Location>hanasp7:30003</Location>
      <EstimatedCost>
       <Exclusive Unit="us">511194</Exclusive>
       <Inclusive Unit="us">511194</Inclusive>
      </EstimatedCost>
      <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
      <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
      <LogicalPlan ID="ID_11" Type="Estimated">
       <RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
        <Name>Project</Name>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
        <Child ID="ID_12" >
        </Child>
       </RootRelation>
       <Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
        <Name>Aggregation</Name>
        <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
        <Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
        <Child ID="ID_13" >
        </Child>
       </Relation>
       <Relation ID="ID_13" TypeName="TABLE" Status="Finished">
        <Name>Column View</Name>
        <Schema><![CDATA[_SYS_BIC]]></Schema>
        <ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
        <Location>hanasp7:30003</Location>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
       </Relation>
      </LogicalPlan>
    </Relation>
    </Plan>
    Regards
    Raj

    Hi,
    To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
    Please go to version 74, if possible.
    Regards,
    Michael

  • Error while checking in and storing

    Dear All
    I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
    Error while checking in and storing
    Message no. 26253
    What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
    Regards
    chandra

    Dear Chandra,
    please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
    Best regards,
    Christoph

  • Error while doing EHP4 upgrade in downtime phase

    HI .
    Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
    Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
    Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04  LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
    Please help me in resolving this error.
    Sanketh.

    Hi,
    Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
    Thanks
    Sunny

Maybe you are looking for

  • Internationalization for more than 2 countries

    I created tiny application (http://01.sk/i18nP2.zip) with 4 locales (US, GERMANY, FRANCE, ITALY). It shows current session locale. I placed button in the view which changes the locale of current user to next locale (US->DE->FR->IT->US). However when

  • How to cancel autorecharge

    Hi - I was wondering how can I cancel the auto recharge option on my account& mane years ago this was an easy to find option, now I can't find it anwhere. Please advise. Solved! Go to Solution.

  • JDeveloper 10g does not export .ear, it complains about a JSP

    There is a project on J2EE. JDeveloper 10g rejects to export .ear, .war и .jar (EJB jar), it complains about a JSP page, it writes the follwing: Error(3,48): FIXED type Attribute value not equal to the default value 'http://java.sun.com/xml/ns/j2ee'

  • Deleting pictures from iPhone/iPhoto

    I'd like to permanently delete pictures from my iPhone and iPhoto with one operation. Is there any way to do that? Thanks

  • I just loaded update 5 . cant find my photos

    i just loaded update 5. can not find my photos