Error while doing MIGO

Hi Experts,
While doing migo system showing the error message:
in this purchase order no excise.
It is IS OIL process.
Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629
Pls help some one.
Regards,
Hanuman.

HI
is it Excisable Material, did you maintain  the Tax indicator in PO stage? IF yes , next step is to check , are you selecting the right Post to....... register menu during MIGO, for example we use Post to Part-1 register only, then if yes , the you are getting this error becuse you have missed the J1ID master data details. Minimum you should maintain 1. chapter_id details, 2. Material and chapter_id combination 3. Vendor Excise details. for the materials you are tring to make GR.
Best Regards
SAM

Similar Messages

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • No rfc destination defined for global trade services error while doing migo

    Hi all,
    Pls help me in fixing the following error..
    "no rfc destination defined for global trade services" error while doing migo

    i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
    Meanwhile, check this note:
    Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
    Cheers,
    Jazz

  • WBS error while doing MIGO

    Dear Experts,
    I am getting following error while performing MIGO - The WBS element XXXXXXX is not the lowest level in the project.
    Kindly let me know what does this error mean and how to resolve the issue.
    Thanks in advance
    Leena

    Leena0 wrote:
    - The WBS element XXXXXXX is not the lowest level in the project.
    >
    It seems there is a validation in the system which checks whether any child WBSE is available. It might be a business requirement to post actual cost only on the lowest WBSE. It could be a user exit. Please check the functional specifications prepared during the implementation.

  • Spool error while doing migo

    Dear MM Experts,
    While doing migo i am getting error as "Error in spool c call spool overflow"
    Got this thread but not getting exactly : http://forums.sdn.sap.com/thread.jspa?messageID=4528971#452897
    Please help me out.
    Thanks & Regards,
    Sandeep.

    Hi all
    Delete the old spool request using SPAD .
    regards,
    reza rostami / mapna

  • Error while doing migo PO not yet release

    Hi experts,
    While doing posting in Migo for a PO . it showing error
    "Purchasing document not yet released."
    But i have already released. and while seeing the header details in ME22n, it showing as released.
    pls help
    regards
    arun

    Hi,
    I have checked in PO all are released and the indicator is in Release only R.
    The confirmation key also not ticked.
    but still showing that error message while posting
    regards
    arun

  • Getting ABAP runtime error while doing MIGO-GR against PO.

    Hi,
    Getting ABAP runtime error message while doing GR against PO.
    47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
    48
    49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
    50    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
    51         EXCEPTIONS
    52           error_message = 4.
    53 *  As soon as we have started to put things into UPDATE TASK, we must
    54 *  ensure that errors definitely terminate the transaction.
    55 *  MESSAGE A is not sufficient because it can be catched from
    56 *  external callers which COMMIT WORK afterwards, resulting in
    57 *  incomplete updates. Read note 385830 for the full story.
    58    IF NOT sy-subrc IS INITIAL.
    >>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
    60                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    61 *     MESSAGE A263.
    62    ENDIF.
    63 * Optische Archivierung
    64 * Spaete Erfassung mit Barcode
    65 * Redesign of barcode handling -> note 780365
    66   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
    67                                          xmkpf-mjahr
    68                                          barcode.
    69
    70   MOVE-CORRESPONDING xmkpf TO emkpf.
    71   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    72     EXCEPTIONS
    73       error_message = 4.
    74    MOVE-CORRESPONDING xmkpf TO emkpf.
    75    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    76         EXCEPTIONS
    77           error_message = 4.
    78    IF NOT sy-subrc IS INITIAL.
    Any pointers
    Code Formatted by: Alvaro Tejada Galindo on Jan 14, 2010 6:00 PM

    Hi ,
    Any inputs
    for this error
    No RFC destination is defined for SAP Global Trade Services
    Regards
    Ashu

  • Error while doing MIGO:-Choose valuatlion type

    Dear All,
            Can anybody suggest me on this issue. while doing GR system showing Choose Valuation type. IN process Order there is one material  which is having 2 components.In two components for one component there is no valuation category is not maintained.
           Let me know whether error is coming due to this configuration.

    Hi ,
             Are doing GR against process order in MB31 ? In that case system will check valuation category of Fert only is it?
    Are you maintaining split Valuation for FG  material?

  • Dump error while doing migo

    >I am trying to do migo for a standard po. after doing all the entries the document is showing "document ok". But while posting the gr i am getting an error "the curent application  triggered a termination with a short dump.Account 24840000 is blocked for posting. Trigger location of runtime error. Program SAPLMWBL.
    >Can anyone guide to remove this error. Full points will be rewarded for a correct solution.
    >thanks in advance.
    >Ashutosh

    DEAR ASHITOSH,
    A/C 24840000 MAY BE BLOCKED FOR POSTINGS.
    PL. CHECK THIS OR CONTACT UR FI TEAM
    REAGARDING THIS.
    HOPE THIS WILL SOLVE UR PROBLEM
    AMOL

  • Getting Error while doing MIGO

    Hello Gurus,
    I am facing one problem recently. While I m doing MIGO_GR against PO, I am getting the error for Account Determination Key and Document Splitting. I have gone through all the configuration for Document splitting & Account Determination and found all correct.
    I created PO on 01.03.2008 for 10000 Qty and i was doing MIGO_GR partially. When i m trying to do MIGO_GR for the rest of qty. I m getting the error for Account Determination key and Document splitting.
    It very urgent and right now i m searching for work around solution.
    Can anybody help me pls in this regards??
    Its very urgent!!!!
    Regards,
    Jigar

    Hi,
    Message No. is GLT2152.
    Account Determination 01001/missing
    Procedure :
    either check the splitting rule or create the account determination key.
    I checked all these scenarios.
    I m using 6.0 version
    I am purchasing the material and i have already activated document splitting. earlier i was not getting any error though document splitting was activated.
    What should i do?
    Thanx in advance
    Regards,
    Jigar

  • Error while doing migo for STO order

    hi,
    we have done migo wrt the outbound delivery number and due to wrong invoice values they have cancelled the GR and again they are going to do the GR but system is not allowing to post the document since there is an entry in rg23d table with the specified invoice number.how to cancel the rg23d entry.
    please help
    regards
    msp

    Hi,
    Cancel the Excise Invoice which is captured at the time of GR and post it.
    And do the GR with new excise invoice.

  • S:ZMESS:021 Error while doing MIGO (GRN)

    Dear Guru,
    I am facing the problem in GRN error is "A:MESS:021"
    Please help to solve this problem.
    Thanks in advance.
    Raj.

    Hi,
    Need to update Kernel Patches.Check with Basis Consultant.
    Refer  Notes 19466  & 318846.
    Regards,
    Biju K

  • Message no. QA495 error while doing migo through movement type 322

    Dear Experts,
    Please help.
    I searched for this content but didn't get content matching my requirement.
    I am trying to do stock transfer through movement type 322 when this error message is stopping me from posting the document.For this material inspection set up is active.
    I want to transfer the stock from unrestricted area to quality inspection stock.Can you please suggest how to transfer the stock from unrestricted to quality inspection for this material.Can I do it with some t.code in QM.
    If so please guide me how to transfer the stock.
    Kind regards,
    Pradeesh.P

    Hi,
    Basically, system is preventing you from managing stock of QM controlled material through non-QM transactions. You must be getting this error "Change the inspection stock in QM only"
    You can post this quantity into QI via two methods,
    Activate inspection type 08 for this material and then do the 322 mvmt. This will move the quantity into QI with an additional inspection lot of 08 origin.
    Take complete quantity out of QI, Deactivate existing 'Stock relevant' inspection types and then do the 322 mvmt.
    I'll suggest you to go with first option as it is more feasible and convenient.
    And, this issue has been discussed several times and there are plenty of threads available on this. Im not sure why didn't you find any
    ntn

  • Error message while doing MIGO.

    Hi,
    I am getting error message while doing MIGO. Can some one help me out in this issue.
    Consolidated companies 0 and 5686 are different
    Message no. F5 080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.
    Thanks in Advance,
    Subhajo

    Check Fi customizing in OBA7.
    As you mentioned MIGO, I assume you are doing goods receipt, so you use document type WE.
    Within WE you must not have selected  the field inter-company posting .
    Best you place the cursor into this field and press F1 for detailed explanation,

  • While doing MIGO transaction system showing error: Check table169P the entr

    Hi experts,
    while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
    pls do needful.
    Thanks&Regards
    sreenivas.p

    Hi,
    Please specify Whether you are doing Blocking of Invoices or what?
    As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding  company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
    Please check....
    For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
    Regards,
    Ninad Kshirsagar

Maybe you are looking for