Error while executing a report  in BI 7.0

Hello Friends,
My BI7.0 system  is a fresh installation.
I  have  created a query using Nw2004s Bi Frontend-Bex Query Designer.
After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
The page cant be displayed. & the URL is 
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
Why am i not able to execute the Bex report in the browser?
Please let me know
Thanks
mv_d

Hi
What do you mean by Install portal? Where should I install?
While installing the server i have choosen the Usage type EP also!!
Thanks
mv_d

Similar Messages

  • Error while executing the report to display on the web in BI 7.0?

    Hi All,
    In BI 7.0, Getting Error while executing the report to display on the web?
    The error message displayed is:
    " Network Access Message : The website cannot be found ".
    Source: DNS error.
    Why this error is coming.
    Wht needs to be done.
    Thanks in Advance.

    Hi Kishore,
    All the configurations are in proper shape.
    We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
    Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
    EP is not configured over here. Is that causing the problem.
    Thansk in Advance.

  • Error while executing the report FAGLB03

    Hi,
    i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
    There is no active info structure for field catalog SAP_FI_DOC_003
    Message no. Q6504
    Diagnosis
    The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
    Procedure
    Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
    Please could some one help me on this issue.
    Thanks & Regards,
    Venkat

    Hi,
    Please refer the below note.
    1361304.
    Reg
    Madhu M

  • We are facing error while executing Bex report.

    Hi Gurus:
    We are facing error while executing Bex report.
    Messge :                                                                          
    u201CQuery 0: Runtime error program state check for conversation 05284411 / CP  with parallel processing via RFC
    Message no. DBMAN428u201D
    The query is based upon Multiprovider (based upon 2 basic cubes).
    Both cubes are partitioned by   info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
    Those cubes are not containing any non-cumulative key figures and Service package level for  SAP NetWeaver BI 7.0 is  u2018SAPKW70012u2019.
    I have checked those cubes in RSRV and carry out following steps:
    "All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
    I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
    Detail ERROR:
    Record with the DIMID 2 contains non-fitting time characteristics
    Message no. RSCV053Diagnosis
    The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
    I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019  for this but still not sure this will work or not .
    I tested this in dev server , didn't feel useful.
    Could you please let us know what to correct this error.
    Anwser will be rewared.
    Regards,

    >
    Surendra Pande wrote:
    > Anwser will be rewared.
    > Regards,
    Go read the RULES of these forums.

  • Error while executing a report

    Hi ,
    I have a problem while executing a report to brower as  ..
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
    The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
    In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
    Thanks and Regards
    Rajesh

    Hello,
    Open the query in query designer and check the query and see wht detailed error message you get.
    Regds,
    Shashank

  • Error while executing webi report

    Hello Experts,
    I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
    After putting these object when I execute the report i get following error:
    Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
    Can anyone suggest me how to resolve this error?
    Regards,
    Nirav Shah

    yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
    Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
    Thanks

  • Error while executing WAD report

    Hi Gurus,
      While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
    Reference to data provider "%NM%" is invalid
    In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
    DROPDOWN_ITEM_1
    No reference To data provider defined
    In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

    can u brief me, and provide me any step by step procedure for WAD template creation
    I believe you have already posted a Q on Dashboards
    Re: DashBords
    & many have responded with documentation links that can help. I suggest you take time to go thru' the links.
    Reference to data provider "%NM%" is invalid
    In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
    You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
    No reference To data provider defined
    In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
    Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

  • Error while executing a report : Time limit exceeded

    Hello Experts,
    i have executed a report  and it took long time and finally throw an error saying that time limit is exceeded ,
    please suggest how to resolve the problem
    Thanks in Advance
    Nitya

    Hi Nitya H,
    There are many resons behind Time out issue.
    It is better to find where exaclty, our report is taking more time.
    Below are the some of the bottle necks we need to monitor for time out issue:
    1) OLAP query generation time.
    2) F4 Search time.
    3) Read Cache.
    4) Write Cache.
    Above features we can monitor @ RSRT transaction.
    If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
    For F4 search ,keep mater data as data retrival target.
    For Read Cache and Write Cache increase the query memory @ RSRT.
    Plse check the report and let me know if there is other bottle necks for query execution....
    _Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
    Hope this may helps you...
    Cheers,
    Maruthi

  • Error while executing a report from Planning

    Hi,
    I've got this error message when I execute a report from Hyperion Planning (web) :
    "5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
    Can you help me please ?
    Thanks.
    Virgile.

    I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
    the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
    restart the BI+ reporting services and then try to run the reports!

  • SSRS Error while executing the report

    Hi,
    dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
    URL.
    Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
    i can see the above log in reporting services log files, does anyone having the idea about this?
    Thanks
    Veera
    Thanks
    Veera

    Hi Veera,
    According to your description, when you run the report, you get XMLDPException and 500 error.
    In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
    to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • REP-770 Error while executing the report.

    Hi,
    I am trying to run a report in Application Server 10g. I am executing this report from a form.
    When I try to run the report using the 'rdf', I get the error
    "Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
    But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
    Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
    Could someone help me solve this issue.
    Thanks
    Aruna

    Hi Aruna,
    I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
    BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
    and
    BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
    Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
    BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
    They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
    Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
    Navneet.

  • TSV_TNEW_PAGE_ALLOC_FAILED  error while executing the report

    Hi all,
    . We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report  on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
    Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
    Now when I provide the key date as 30.06.2011 and Company code =XYZ.
    I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
    Variables:
    1. Key Date:  Is a  Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from     u201C00000000u201D to u201C30.06.2011u201D.
    2.Company code: Is a Manual Entry /Default variable.
    I also have shot dump.Please find the error analysis of dump below:
    The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
    ABIX[1]-GTABIX" could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 4
    Number of rows: 1503307
    Allocated rows: 1503307
    Newly requested rows: 2048 (in 1 blocks)
    can any one help me .......
    Regards
    Laxman

    Hi,
    Just check following things
    1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
    2. See whether any back up process is happening and it has consumed the main memory.
    3. Are you getting this error regularly
    4. See any transport went and compression/aggregation got removed.
    5. Check whether there are many dumps in ST22 same time when you execute report
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
    6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
    7. Check whether Infoprovifder got removed from BIA
    8. Query removed from BIA post transport
    9. Run RSRT and regenerate the report.
    Thanks and regards
    Kiran

  • Getting an error while executing a report

    Hi,
    While generating a report through Tcode RSRT, I am getting an error message.
    Its showing ,
    "Element 3X7YU11DF0IQ7YARYGY0BU9ZN (version A) does not exist on the database".
    Can you please help me out in this.
    Thanks,
    Jyothi.

    Hi Jyothi,
        Did you make changes to the existing report or facing problem while creating new report? Either ways, it is something like some element of in the report has some realtion with others and that particular element is not there now. Just check if they are any exceptions or conditions in the report which were defined on the objects which were present earlier and removed later.
    Something similar to the above scenario might be the case.
    Hope this helps you....

  • Error while executing Crystal report in client computers

    I got this error message -2147206460 Crystal Reports Activex Designer invalid directory. any idea guys how can i fix this. I tried using Crystal Report viewer in the server and its working perfectly.
    thanks

    Michael Litiatco 
    is your report working on SAP from server machine or it only works on Crystal Report on server machine
    IF your report is working  on SAP server then, the problem is on sharing the .rpt file with client
    Place the .rpt file in shared folder whichi is accessable from all the clients then use that .rpt file in SAP CR addon and update it
    updating the path from each client system SAP towards shared .rpt file
    do you have any firewall installed, try disabling within your network and check
    This should Fix your problem
    make sure the printer is shared and correct printer is set as default printer
    if possible give a test print page from client to make sure the printer is online
    Regards
    Krish

  • Getting timeout error while executing my report

    Hi experts,
    I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
    Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
    Thanks & Regards,
    Bhanu

    Hi ,
    I am working as an abaper for Service Management module.
    I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
    Thanks & regards,
    Bhanu.

Maybe you are looking for