Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

Similar Messages

  • Diadem runtime error while executing command "SchemeMeasStar"

    Hello:
    I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
    -Error- DIAdem
    Runtime Error While Executing Command "SchemeMeasStar"
    Error Type: UNKNOWN
    Error Address:00001720
    Module Name:GFSBase.Dll
    Would you like to give me some suggestions?
    thanks very much
    jing

    Dear MarcusP:
    Thank you very much.
    your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
    Thank you very much.
    yours
    Jing
    Attachments:
    DIAdem_Error.doc ‏305 KB

  • BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

    HI,
    I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
    Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
    "ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
    [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
    Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
    to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
    object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
    name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
    or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
    SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
    verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
    has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
    other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
    look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) 
     at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
    Boolean asyncClose)   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)   at
    System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
    sendToPipe, Int32 timeout, Boolean asyncWrite)   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText)   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
    cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction)   --- End of inner exception stack trace ---   at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
    Transaction transaction)   at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc)   at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc)   at
    Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation)   at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation)   at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() 
     --- End of inner exception stack trace ---   at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand() 
     at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run()   at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

    Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
    Please review your BAM Definitons.
    Regards.

  • Error Occuring While Processing Data With DIAdem 8.1Excepti​on EAccessVio​lation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll​". Read address 37363430

    Hello,
    We are having an issue running Diadem 8.1 on a new HP XW 9400 with Windows XP SP2. 3 errors have been occuring with frequent crashes, they are:
    1) "1Exception EAccessViolation in module ntdll.dll at 000111DE. Access violation at address 7C9111DE in module 'ntdll.dll". Read address 37363430.
    2) The instruction at "0x7c9111de" referenced memory at "0x352e302d". The memory could not be "read".
     3) ---Error---   DIAdem
    Error in Autosequence - processing in line: 74 (IARV_VAR_GET)
    Runtime Error while executing command "Iarv2Txt$ := FR(T9,L1)"
    Error type: ACCESS VIOLATION
    Error address: 000101DE
    Module name:ntdll.dll
    We are using the same scripts and version 8.1 on a variety of Dell desktop computers (W2K and XP SP2) without any issue, looking for suggestions as this affects no other software on the HP XW 9400 other than DIAdem. Appreciate any suggestions.
    Message Edited by swillh on 06-25-2007 08:55 AM

    Christian,
    I will answer your questions in the text below. Thanks for your help.
    Hi swillh,
    I also would like to help you.
    Unfortunately, The reported access violation in the central Windows ntdll.dll is very unspecific.
    May be the following questions will help you to provide me more info.
    1. You mentioned that the aut's and - I think - also the accessed text file reside on a server.
    Is there a stable network connection?
    The server can sometimes be a little slow but the connection is good. This computer is using the same connection that the prior computer utilized without issue.
    Are the files accessed by multiple clients simultaneously?
    It is possible that more than one computer can be accessing the same file, but again, this has never been an issue. We are reading the files only, not writing to them.
    The processing routines we are running have used for over 5 years without any issues until adding this computer.
    Is the text file read by one client while another client is writing the same file?
    No, files are "read only"
    2. Have you already tested opening the file with the FileOpen command before calling FR?
    Yes
    Do you see any chance to convert the aut to a vbs file? This gives you more alternatives in accessing text files.
    3. What do you mean with "processing ATD's with 30 or more channels of data"? Where is the relation between ATD files and data channels?
    Processing Crash Dummy data with file sets low in channel count (15 channels) result in successful processing without any crashes or access errors.  When processing dummies with more than 20 channels we sometimes encounter these issues. The higher channel count may be the only common factor I can find in these faults.
    Steve
    Message Edited by swillh on 07-09-2007 08:44 AM

  • DIAdem 2011: Error while executing "PicPDFExport" command

    I'm using DIAdem v 11.3.0f4563 on Win2003 (32bit).
    I'm unable to export reports to PDF (this has worked fine on previous DIAdem versions on the same HW/OS).
    The problem occurs every time I select "File -> PDF Export..." from the menu.
    First i get to select the file name, then a messagebox appears with the following text:
    Error while executing "PicPDFExport" command.
    Error type: UNKNOWN
    Error address: 0000AEF7
    Module name:kernel32.dll
    After clicking "OK" the menus and buttons no longer work (but I'm able to switch between the different tabs), so I have to restart DIAdem.
    I also have a script for exporting reports to DIAdem, this produces the same error message (but the rest of the application is still working after clicking OK, so no need to restart DIAdem).

    Hello salte,
    Could you please let us know what OS you are using?
    Thanks,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Access Violation error with Diadem 2011

    I've started using Diadem 2011, and have run into an Access Violation error when loading some of my existing reports.  I've created a simple example which shows what's happening:
    I've created a simple Bar plot:
    If I change the left hand bar to be "Filled" instead of "Right Diagonal", Diadem throws up an access violation error.  I've attached the TDM and TDR files used to create the graph.  The error in the log file is:
    139  Error while executing "" command
         Error type: ACCESS VIOLATION
         Error address: 0004F5E5
         Module nameIAdem.exe
    Diadem: 11.0.3f4563 TDM
    USI: 1.9.0f4551
    DataFinder: 3.0.0f4556
    (By the way, it would be great to be able to copy those version details directly from the About page!)
    Attachments:
    Data.zip ‏7 KB

    I've tried this as administrator, and have exactly the same issues, so it doesn't appear to be a permissions problem.  I've uninstalled and reinstalled DIAdem and everything's the same.
    Here's another ZIP file with hopefully all of the required files.  I've created the data files from scrathc several times, and see the same problem.  One other thing I've just noticed is that it only occurs when filling the bars with the color Black, not blue or red or anything else.
    Attachments:
    Data.zip ‏9 KB

  • ACCESS VIOLATION error in Report

    Hi,
    I am getting an access violation when trying to save a report.  The report only has two worksheets.  ONe is a table of contents and one of them is a template for plotting data.
    Error while executing "PicSaveAs(FileDlgName)" command
    Error Type: ACCESS VIOLATION
    Error Address: 89FFEE10
    Module Name: DIAdem.exe
    I am using Diadem 2011.
    Basically, I am trying to create a template file to make plots with.  I have a script that copies my template plot, plots the next channel, and repeats for all channels in the data portal.  The script works fine, and I got it to run once.  HOwever, I wanted to make a change, and something happened to my original template file.  So I open my report with 100 pages, delete all pages (and by the way WHY CAN I NOT DELETE MORE THAN ONE PAGE AT ONCE?  this is very annoying that i have to do this one at a time (and confirm every time) either by manage or delete options) except one, and I try to save this as my template plot and I get this error...tried several times...Any ideas?
    jason

    Hello Jason,
    a workaround for you could be to open two instances of DIAdem. Open your report in DIAdem one.
    Open first page and select "Edit->Select All" and "Edit->Copy" go to your second DIAdem and open Report with an empty report. Select "Edit->Paste" and your template is restored.
    Greetings
    Andres
    P.S.: Please post your report anyway if possible to help us to find the issue.

  • Error while executing BexQuery

    Hi all,
    I am getting the following error while executing a Bex Query.
    SQL Error:  16
    SQL Error: 0
    Error while reading data; navigation is possible
    Can you let me know of any inputs regarding the same ?
    Regards
    Snehith.

    hi snehith,
    Check whether your infoprovider on which this query is build contains invalid Chars.
    thanks

  • Error while executing report in query designer

    Dear Folks,
    I am geting following error while executing report in query designer.
    Error:500 E
    an exception raised because of 0analysis pattern.
    Hence,i am unable to execute any report.
    Need help.
    Thanks

    Hi Kitu G,
    I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
    I would try and do the following:
    - Goto RSA1 > BI Content > BEx Web Template (BTMP)
    - Then double-click on Select Object.
    - Highlight all objects that start with 0ANALYSIS_PATTERN
    - Click on Transfer Selections, and then Install.
    If you can't do the above in prd, do it in DEV, then transport the objects to prd.
    After all this, try re-running your queries.
    Any questions/clarification just let me know
    Cheers.
    Darwin

  • Runtime Error While executing the WebDynpro Application

    I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
    It says like "
    Short text
        No roll storage space of length 9728 available for OCCURS area.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    But while executing some other Web Dynpro Applications, i am not facing this problem.

    Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs  temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
    Check your application or ask basis consultant to look at the memory parameters in instance profile.
    Regards
    Rohit Chowdhary

  • Error while executing planning Function

    Hi All,
    I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
    Errors occurred when executing planning function RTFMPF01/RTFMPG01
    Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
    Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
    Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
    Thanks,
    Vamsi

    Hi,
    Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
    Looks like there is a characteristics relationship which derives the attribute store from Region.
    Check the master data for Region for attribute Store and the corresponding values.
    The values that are maintained in the master data will only be allowed to enter in the cube.
    Thanks
    pratyush

  • Error while executing COI

    Dear Friends
    I am getting an error while executing the COI activity. The error message is as below
    Change of total share in consolidation unit 102001 / 30208 does not equal 0 %
    Investee 102001 / 30208 : Reported investment data must have exactly two investors.
    We are following Company code and profit centre based consolidation. We have done some total transfers during period 03 and period 08 and the system did not give any error during this period. However when i run the COI for period 11 the system gives me the above mentioned error.
    The common thing i have noticed is it is giving errors for those company codes which have moved to different groups, however these groups fall within the same hierarchy.
    Any brilliant ideas would be highly appreciated.
    Cheers
    Shiv

    Hi Dan
    There is one movement downwards in period 03, and there are 5 movements upwards in the hierarchy. The investee units were not removed but were maintained in multiple places when there was a downward movement; however during the upward movement the investee units were not added in the upper units at they were moving to different groups within the same hierarchy and would presumably get rolled up.
    Secondly the some total transfer when made from group 1 to group 2 within the same hierarchy, they have been moved to a company which does not have the parent tick for E.g. Investee company x001 moved from Company A001 (Parent) from group 1 to Company B001 (non parent) in group 2. I feel this is incorrect, it should be moved to a parent in the other group. But i have not worked extensively on this so can you please explain, if my understanding is correct.
    I hope my understanding is correct.
    Cheers
    Shiv

  • Error while executing BEx

    hi !
    I am getting the following error while executing the query .
    Abort system error In program Cl_RSDM_READ_MASTER_DATA and form_sidval_direct_
    Please suggest .

    Do you have any replacment path variable defined in the query?
    MASTER_DATA_READ is done either by end of the query execution (before the formating the result area) or while performing the value population for any formula / KF where replacement path is used.
    - Danny

  • Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'

    Hi Experts....
    I am facing a weired error when connecting to Exchange On-Premises...
    I have 2 virtual machines in Virtual-Box .On 1st machine I has installed Active Directory..
    On 2nd machine I have to install Exchange Server.I have joined the second machine in the domain.
    After Installing all the pre-requisites and updates for Exchange when I open the exchange management console I faced the following error....
    Initialization Failed
    The following error occurred when retreiving user information for 'ABC\Administrator':
    Unexpected error [0x8CFB0B0] while executing command 'Get-LinkedRoleGroupForLogonUser'
    Click here to Retry
    Can anyone help me in this regard....!!!!
    Thank You...!!!!

    Hi,
    From the error description, I recommend open C:\Program Files\Microsoft\Exchange Server\V14\RemoteScripts, check the ConsoleInitialize.ps1 file, find "function global:Get-LinkedRoleGroupForLogonUser()", here is the right file of this part for your reference.
    foreach ($sid in $sids)
             try
               $accountName = $sid.Translate([System.Security.Principal.NTAccount]).Value
             catch
               continue
             if ($accountName -ne $null)
               foreach ($roleGroup in $allLinkedRoleGroups)
                 if ([string]::Compare($roleGroup.LinkedGroup,$accountName,$True) -eq 0)
                   $roleGroup
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • App-V 5: Error encountered while executing command Mount-AppvClientPackage

    I am getting this error in which no Google search reveals anyone else as having reported it anywhere.  In fact, after having posted this, it was the only search result that came up with either of these two event ID's or errors.
    I am trying to sequence an in house application. It's a manual install. The application runs perfectly prior to creating the package so I am not sure what this "specified file" is that it can't find.  It says to refer to the AppV Client Event
    Log for more details. This event was *IN* the AppV Client Event Log and there was another event along side it.
    Event ID 9001
    Error encountered while executing command Mount-AppvClientPackage -PackageId eb77be98-bc44-45fd-a0e5-95e0c315808b -VersionId c5013ec7-0456-401b-b99e-d988d97bfa55. Error: Application Virtualization Service failed to complete requested operation. 
    Operation attempted: Mount Package. 
    Windows Error: 0x80070002 - The system cannot find the file specified
    Error module: Streaming Manager. Internal error detail: 74F0262C80070002. 
    Please consult AppV Client Event Log for more details.
    Event ID 14016
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    The network connection is still quite alive on the client and the firewall is disabled on the App-V server. I can still reach and view the xml file when browsing to the web service on the App-V server.  I can also run Sync-AppVPublishingServer from
    powershell without error.
    For more inside info on the app: 
    1. It is a manual install. A directory is simply copied to the hard drive manually.
    2. An ocx file gets registered from the Syswow64 directory.
    3. MySQL 5.1.13 client is installed.
    4. Shortcuts are created.
    5. A system DSN is created using C:\Windows\SysWOW64\odbcad32.exe
    6. The app runs perfectly on the sequencer prior to creating and publishing.
    UPDATE:
    Get-AppVClientPackage reveals this:
    PackageId            : eb77be98-bc44-45fd-a0e5-95e0c315808b
    VersionId            : c5013ec7-0456-401b-b99e-d988d97bfa55
    Name                 : Tietan
    Version              : 0.0.0.1
    Path                 : \\wuspappv01\appv1\TietanProd\Tietan.appv
    IsPublishedToUser    : True
    UserPending          : False
    IsPublishedGlobally  : False
    GlobalPending        : False
    InUse                : False
    InUseByCurrentUser   : False
    PackageSize          : 217155655
    PercentLoaded        : 0
    IsLoading            : False
    HasAssetIntelligence : True
    The path is accessible from the client server. I can see the file. It's there.

    Hello,
    If you execute get-appvclientpackage
    And then check what is the value for Path for the package you have an issue with.
    Most likely the error message means that the file in Path isn't reachable.
    As indicated here;
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    Nicke Källén | The Knack| Twitter:
    @Znackattack

Maybe you are looking for

  • How to use TC as backup in fiber network?

    I've just got a new fiber network installed at home and I'll use the wireless functionality. And to that I would like to connect my TC. I do not want the TC as a base station only for backup and as a hub for my printer. How do I do?

  • How to re-activate my creditcard?

    My credit card was once used w/o my knowledge and a IAP was done by a child. Later i complained and i got my refund BUT also, the credit card got rejected for future use... Is there anyway to re-activate my credit card?

  • Ichat problems over apple network

    We have 2 WDS network participating airport express base stations connected to the internet via Comcast cable. The network is really fast and we never had a problem with multi-way video chatting inside or outside the house. Now that the family upgrad

  • Making a use defined field non editabe

    Hi I have added a new field in Organization screen of OIM. But i wanted it to be a non editable field. How can I achieve that? Thank u sas

  • Converting master pages into master spreads

    Master pages/spreads are driving me nuts! Am working over an old document - (but I think the original was converted from qxd) Although document set up is facing pages - the master pages are master pages rather than spreads. This means if I want to in