Error while Executing from BI 7.0 (Query Designer)
while exicutting query from Query designer i BI 7.0. I m getting following error message.
Please check and reply back...
The following error was encountered:
Unable to determine IP address from host name for bidev.nt_dolvi
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
amit
Hi Amit,
I guess you are trying to execute the query in the Browser.
In which case you need to talk to the basis and find out if the Ports are open and the required configuration to run in Browser is done.
Regards,
Tom.
Similar Messages
-
Portal runtime error while executing BI report through BEx Query designer
I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nkDear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards -
Exchange Server Information Store has encountered an error while executing a full-text index query
Hi Team need help
Exchange 2013 EAC doesnt show the databases and it gives message
"Your request couldn't be completed. Please try again in a few minutes."
Its a 9 Node DAG and I stopped and diabled Search and Search Host controller on all of them
in the event viewer see a lot of Event id 1012
Log Name: Application
Source: MSExchangeIS
Date: 4/1/2013 9:23:48 AM
Event ID: 1012
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ex1301.dagdc.com
Description:
Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*",
mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))"). Error
information: System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeIS" />
<EventID Qualifiers="49156">1012</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-01T16:23:48.000000000Z" />
<EventRecordID>192599</EventRecordID>
<Channel>Application</Channel>
<Computer>ex1301.dagdc.com</Computer>
<Security />
</System>
<EventData>
<Data>and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*",
mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))</Data>
<Data>System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)</Data>
<Binary>5B444941475F4354585D000084000000FF09000000000000000268000000808A00100000000080CA00100000000080B200100000000080D200100000000030FF001000000000309F00100000000030DF001000000000B09D001000000000B0DD001000000000B0ED001000000000B08D001000000000B095001000000000B0A5001000000000</Binary>
</EventData>
</Event>Hi,
Please reenable and start the search engine service and try again.
The simillar case for your reference:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/4f43ef50-b71f-4ab3-8ced-70f1c36c5509
Hope it is hlepful.
Fiona Liao
TechNet Community Support -
Error while executing from the Favorites Menu
Hi Experts,
I am getting error while Excuting the Favorite from SAP Menu Screen ( SAP Easy Access ) ..
After clicking , one Internet Explorer screen is appearing .. And after few seconds, I am getting the error.
The detail is as follows :
The system is trying to execute the program/display the file
http://dbcibwp:8100/sap/bw/BEx?cmd=ldoc&infocube=ZMTOWN&query=ZMTOWNS_SALE_AC_PL&sap-language=EN
ATTENTION : The object that will be executed could not be determined !Do you want to grant access to this file ?
There was a problem sending the command to the program ..
Please suggest
Thanks,
SanjanaHi Durgesh,
If I am running the same query through RRMX . There is no problem. In transaction RSRT, Its running fine.
Can you tell me , how to check the Query in "DBCIBWP" where it is located exactly ??
Thanks,
Sanjana -
2499 error while executing a Oracle PL/SQL query
Hi,
Im a newbie, using Oracle 10g enterprise edition, netbeans 6.5. Im unable to execute a SELECT query which contains multiple JOINS & UNIONS(lengthening upto 3800 chars) through code hence It flashes SP2-0027: Input is too long (> 2499 characters) - line ignored.
Earlier i had same problem while executing the query on the web interfaced query browser(isqlplus), sqlplus prompt.
Later on i found a Solution for such queries which are lengthening more than 2499 chars is either to break the query into multiple lines by pressing enter manually or to use M$ Word application (paste the query in a file and save it as a plain text filetype with insert line breaks option checked).
But what about the coding part now?
Please guide me through this.
Regards,
PeterOn sqlplus Oracle can't process lines over 2500 (cero is included on the counting) that's the reason why the error is displayed. To sort out this problem divide your query string into parts smaller than 2500 (2000 is recomended) and just add the next line between them:
CHR(10) || CHR(13)
Since this is gonna be read by the Oracle's engine and embedded into your query line, it will understand that every pair of CHR(10) || CHR(13) is a carriage return command and will drain the buffer processing every line with not errors.
Hope this helps
Edited by: MiloHega on Jan 27, 2009 1:00 PM -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
MDX Query Returns Error while Executing this from SSMS through openquery
Hi I'm getting this kind of Error while executing this ..
Pls help to get it solve .Hi Ashish,
According to your screenshot, it seems you can create a linked server from a SQL Server to the SSAS server, then use OpenQuery to get Analysis Services database structure, right? In this case, please ensure tha you setting is correctly, here is blog which
describe how to do it step by step, please refer to the link below to see the details.
http://dwbi1.wordpress.com/2010/01/01/ssas-dmv-dynamic-management-view/
http://www.ssas-info.com/VidasMatelisBlog/144_using-ssrs-to-report-ssas-2008-database-structure-using-dmvs#more-144
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
Error while executing query through rsrt
hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AMHi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav -
Web Analysis Error -- Error while executing query and retrieving data
Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveWHi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P -
ORA-01722: Error while executing query in Query Designer
Hi All;
I am getting the below error while executing a query
ORA-01722: invalid number
Error reading the data of InfoProvider
Error while reading data; navigation is possible
Have anyone encountered this before? How do i resolve this?
Thanks!
~ Arun KKHi,
Did you checked all the setting required to run this query are present in the Qualtiy system??
Which means all the characteristics,key figures are in active state.
Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
Thanks
Ajeet -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Error while executing query in OLAP server
Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puruPurushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM
Maybe you are looking for
-
Tax Classification -- Customer Account Group
Hi all I have been given a set of Customers belonging to different Customer Account Group. I want to know for which Account Groups, the Tax Classification was made Mandatory ! Aim of us to extend some Customers/Partners from one Company Code to o
-
Moving data from shopping cart to Purchase Req in backend
Hi, We are implementing SRM 5.0 with R/3 ECC 6.0 in the backend. I am brand new to this module and version. When shopping and ordering, then running clean_reqreq_up to transfer to the backend, we notice a material number does not flow through to R/
-
Ive been adding pictures to my iphoto over past 6 months and they do no how up in "events", "last 12 months", etc. Then i import them from external harddrive and it shows up as a blank screen (pix visible in small frame but click on that items and ze
-
Can I use Imovie 6 to combine edit songs and combine them?
I would like to import some songs, cut some of them in half, and make them into one big song. Can I use iMove or is there a better free program for that?
-
Je suis incapable d'ouvrir l'application "Notes". Quoi faire?
J'ai écrit des notes super importante dans l'application que Apple me donne à la base appelé "Notes" . J'ai écrit une dizaines de notes et plus tard j'en ai supprimé une et l'applation à subitement fermé et je ne suis plus capable d'y accéder j'essay