Error while executing Guided Procedures Action

Hello,
We are getting the following error when a user is trying to execute an Action in the Guided Procedures Process:
"Cannot complete Action: Activity could not be read".
What can be causing this?
Any help would be highly Appreciated.

Hello,
This is more than likely due to an inconsistency of a GP object at database level. I suggest opening an OSS ticket as this would require detailed analysis.
Thanks and best regards,
Carl Connolly
Senior Support Consultant - Netweaver Web Application Server
AGS Primary Support, Global Support Centre Ireland
Guided Procedures trouble shooting guide:
www.sdn.sap.com/irj/scn/wiki?path=/display/JSTSG/%2528GP%2529Home

Similar Messages

Error While executing a procedure

Hello FOlks,
When i try to execute this procedure below i get the error saying "Compiled with errors"
ORA--00942-Table or View does not exist
SQL Statement ignored at Line 17.
I tried querying the table and it returns no data. How do i debug this error.
create or replace procedure Load_FADM_Staging_Area_test(p_data_load_date date) is
v_start_date                date;
v_end_date                  date;
begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
insert into STAGE_FADM_HRI_STAGE_BILL
(select
a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,sysdate
from stage_bill@hri1_read_only_remote a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status
,b.Row_Effective_Date
from STAGE_FADM_HRI_STAGE_BILL b))
select
e.action_plan e_action_plan
,e.action_plan_status e_action_plan_status
,e.batch_id e_batch_id
,e.client_cause_code e_client_cause_code
,e.client_id e_client_id
,e.client_datafeed_code e_client_datafeed_code
,e.client_policy_identifier e_client_policy_identifier
,e.close_date e_close_date
,e.created_date e_created_date
,e.date_of_incident e_date_of_incident
,e.date_typed e_date_typed
,e.discovery_source e_discovery_source
,e.employer_group_id e_employer_group_id
,e.event_id e_event_id
,e.event_status_code e_event_status_code
,e.event_type_code e_event_type_code
,e.exclude_from_invoice e_exclude_from_invoice
,e.from_ncoa_date e_from_ncoa_date
,e.group_contract_funding_type e_group_contract_funding_type
,e.hmo_ppo_indemnity_type e_hmo_ppo_indemnity_type
,e.insurance_product_name e_insurance_product_name
,e.insured_termination_date e_insured_termination_date
,e.invoice_date e_invoice_date
,e.letter_status e_letter_status
,e.letter_status_date e_letter_status_date
,e.liability_analysis e_liability_analysis
,e.loss_city e_loss_city
,e.loss_description e_loss_description
,e.loss_state_code e_loss_state_code
,e.manually_moved e_manually_moved
,e.moved_by_user_id e_moved_by_user_id
,e.ncoa_code e_ncoa_code
,e.next_steps e_next_steps
,e.open_date e_open_date
,e.policy_holder_address1 e_policy_holder_address1
,e.policy_holder_address2 e_policy_holder_address2
,ec.action_plan
,ec.action_plan_status
,ec.batch_id
,ec.case_status_code
,ec.client_datafeed_code
,ec.client_id
,ec.client_party_identifier
,ec.close_date
,ec.created_date
,ec.damaged_party_address1
,ec.damaged_party_address2
,ec.damaged_party_city
,ec.damaged_party_dob
,ec.damaged_party_first_name
,ec.damaged_party_gender
,ec.damaged_party_last_name
,ec.damaged_party_ssn
,ec.damaged_party_state_code
,ec.damaged_party_zip
,ec.deductible
,ec.deductible_applied
,ec.deductible_recovered
,ec.deductible_recovered_full
,ec.event_case_id
,ec.event_id
,ec.fee_schedule_code
,ec.internal_coverage_code
,ec.litigation_flag
,ec.loss_injury_description
,ec.next_steps
,ec.open_date
,ec.payment_coverage_code
,ec.pursuit_level_code
,ec.reject_code
,ec.reject_comments
,ec.reject_date
,ec.reject_date
,ec.reject_user_id
,ec.setup_type
,ec.tot_paid_at_close
,eccf.Client_field_data eccf_client_fleld_data
,eccf.Client_field_name eccf_client_field_name
,eccf.Client_id eccf_client_id
,eccf.Event_case_id eccf_event_case_id
,ecf.client_field_data ecf_client_field_data
,ecf.client_field_name ecf_client_field_name
,ecf.client_id ecf_client_id
,ecf.event_id ecf_event_id
from
event@hri1_read_only_remote e,
event_case@hri1_read_only_remote ec,
event_case_client_field@hri1_read_only_remote eccf,
event_client_field@hri1_read_only_remote ecf,
stg_fadm_hri_stage_bill sb
where
e.event_id = ec.event_id and
e.event_id = ecf.event_id and
ec.event_case_id = eccf.event_case_id and
e.event_id = ecf.event_id and
e.client_id = ecf.client_id and
e.client_id = ec.client_id and
ec.client_id = ecf.client_id and
e.event_id = sb.event_id and
ec.event_case_id = sb.event_case_id and
eccf.event_case_id = sb.event_case_id and
ecf.event_id = sb.event_id;
end Load_FADM_Staging_Area_TEST;

Just noticed
I tried querying the table and it returns no data.Could be your NOT EXISTS clause, you are missing something? - "Something" exists, unless the table is empty.
Should probably be something like:
AND NOT EXISTS (SELECT NULL -- You are actually not selecting anything, just probing for existence
                  WHERE <<Correlation to table "a">>Furthermore, you'll never manage to compile the procedure since your second select does not select INTO anything.
(A more apprpriate subject would be "Error while compiling a procedure".)
Finally, When would the ELSE be reached here?
if p_data_load_date IS NULL then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date IS NOT NULL then
    select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
ELSE
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;Regards
Peter

Gettng Error while executing the procedure(oracle 10.2.0.3.0)

Hi all,
I am getting following error While executing the package .
    PLS-00103: Encountered the symbol "Truncate" when expecting one of
         the following:
         * & = - + ; < / > at in is mod remainder not rem return
         returning <an exponent (**)> <> or != or ~= >= <= <> and or
         like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
         member SUBMULTISET_I have written follwing query in the package body.
EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
EXECUTE IMMEDIATE '
     INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
     SELECT
       SERVICES.CID                                                     CID,
       PROFILE.FUCODE                                               CODE,
       TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD')   T_DT,
       PHOR.NUM                                                               SDN,
       C_ALL.cLANGUAGE                                      LANG
     FROM
      SERVICES      .....Please give me the solution for this .
Thank y ou
Edited by: user636482 on Apr 10, 2009 1:08 AM

I am getting following errors if I gave " ' " after not null.
LINE/COL ERROR
42/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
42/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
LINE/COL ERROR
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
42/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
LINE/COL ERROR
45/6     PLS-00103: Encountered the symbol "COMMIT"
52/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
85/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
LINE/COL ERROR
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
85/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
LINE/COL ERROR
85/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
88/8     PLS-00103: Encountered the symbol "COMMIT"
95/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
LINE/COL ERROR
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
133/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
169/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
Thank you

Getting ORA-06512/ORA-00972 ERROR WHILE EXECUTING THE PROCEDURE????

Hi ,
while executing this procedure , I am getting follwoing errors:
Create or Replace procedure ADD_CUSTOM_INDEX is
INDX_NOT_EXIST Number;
CREATE_SQL_STATMENT VARCHAR2(1500);
ALTER_SQL_STATMENT VARCHAR2(150);
CURSOR C1 IS select INDEX_NAME,CREATE_DDL FROM W_CUSTOM_TEST, WC_COMPANY_G WHERE W_CUSTOM_TEST.SYS_TENANT_ID = WC_COMPANY_G.BU_ID;
BEGIN
for V_ROW in C1 loop
     SELECT COUNT(USER_INDEXES.INDEX_NAME) INTO INDX_NOT_EXIST FROM USER_INDEXES WHERE USER_INDEXES.INDEX_NAME = V_ROW.index_name;
     IF INDX_NOT_EXIST = 0 THEN
     CREATE_SQL_STATMENT := ''|| '"'|| V_ROW.CREATE_DDL ||'"' ||'PARALLEL NOLOGGING';
     EXECUTE IMMEDIATE CREATE_SQL_STATMENT;
     ALTER_SQL_STATMENT := 'ALTER INDEX ' ||'"'|| V_ROW.INDEX_NAME ||'"'|| ' NOPARALLEL LOGGING';
     EXECUTE IMMEDIATE ALTER_SQL_STATMENT;
     END IF;
END LOOP;
END ADD_CUSTOM_INDEX;
ERROR at line 1:
ORA-00972: identifier is too long
ORA-06512: at "LOLAP.ADD_CUSTOM_INDEX", line 13
ORA-06512: at line 1.
sturtuce of W_custom_test table is as below:
CREATE TABLE "LOLAP"."W_CUSTOM_TEST"
("INDEX_NAME" VARCHAR2(30) NOT NULL ENABLE,
     "SYS_TENANT_ID" VARCHAR2(15) NOT NULL ENABLE,
"CREATE_DDL" VARCHAR2(1200),
"COMMENTS" VARCHAR2(200),
     "STAT_CD" VARCHAR2(30) DEFAULT 'Active' NOT NULL ENABLE,
     "CREATED" DATE DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPD" DATE DEFAULT SYSDATE NOT NULL ENABLE
Any Pointer??????

Hi
Instead of giving as below, go for the not null constraints.
"STAT_CD" VARCHAR2(30) DEFAULT 'Active' NOT NULL ENABLE,
"CREATED" DATE DEFAULT SYSDATE NOT NULL ENABLE,
"LAST_UPD" DATE DEFAULT SYSDATE NOT NULL ENABLE
That should help
Regards
Sudheer

Runtime error while executing New Hire action in PA40

Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.
149
* Wird mit Einfuehrung des Headerobjekts obsolet.
150
PERFORM REMEMBER_HEADER "                             "XYVPH4K015649
151
    USING HEADER_PROG HEADER_DYNNR 'S'. "               "XYVPH4K015649
152
ENDFORM.
153
154
*       FORM RE588I                                                   *
155
156
157
158
* --> T588I_DHDID                                                   *
159
* --> T588I_MOLGA                                                   *
160
* --> T588I_TCLAS

Implement SAP Note 1004280.. your issue if fixed
If your issue is resolved request you to close the thread or else free feel to touch base
BR
Anil

Error while executing the procedure

Hi,
I tried the following example it's compiled but while executing giving the errors
create or replace PROCEDURE createRZGSet (
        rNm IN VARCHAR2,
        rDsc IN VARCHAR2,
        rId OUT NUMBER
    ) IS
        cId INTEGER;
    BEGIN
        cId := 1;
        SELECT q_id.NEXTVAL
          INTO rId
          FROM DUAL;
        INSERT INTO t_set (rid,
r_nm,
r_dsc,
o_id,
flag)        VALUES (rId,rNm,rDsc,cid,'P');
    END;
/The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /
execute createRZGSet('myp','miyapur',optval);
ERROR at line 4:
ORA-06550: line 4, column 10:
PLS-00103: Encountered the symbol "CREATERZGSet" when expecting one
of the following:
:= . ( @ % ; immediate
The symbol ":=" was substituted for "CREATERZGSet" to continue.could you please hint me in this error..
thanx

The above is compiled ... but while executing
SQL> declare
2   optval number;
3 begin
4   execute createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /remove the execute key word. it belongs to SQL Plus. in pl/sql you can just give the procedure name thats enought.
SQL> declare
2   optval number;
3 begin
4   createRZGSet('myp','miyapur',optval);
5 dbms_output.put_line('val returned is:'||optval);
6 end;
7 /

Error while executing PlSQL Procedure

Hi Chris,
Procedure SPR_VISAMAST_SWITCHCATEGORIZE is created in the TimesTen interchange user. and all object used by this procedure also cached in the TimesTen.
While executing it is giving error.
I traced out where execution is failing, i found that update query on cached table it is giving error.
Command> DECLARE
> SOUTPUT VARCHAR2(4000);
> BEGIN
> INTERCHANGE.SPR_VISAMAST_SWITCHCATEGORIZE('123456', 'SWTCH.030709', 'v2.01', 'fl.01' , 'v2.02' , '1' , SOUTPUT);
> END;
> /
5213: Bad Oracle login error in OCISessionBegin(): ORA-01017: invalid username/password; logon denied rc = -1
5131: Cannot connect to backend database: OracleNetServiceName = "geni11g", uid = "INTERCHANGE", pwd is hidden, TNS_ADMIN = "/u01/app/oracle/product/11.1.0/db_1/network/admin", ORACLE_HOME= "/u01/app/oracle/product/11.1.0/db_1"
8507: ORA-06512: at "INTERCHANGE.SPR_VISAMAST_SWITCHCATEGORIZE", line 39
8507: ORA-06512: at line 4
The command failed.
Please tell me how to solve this issue.

So when you execute this procedure it is actually executing as user INTERCHANGE. Any objects that the procedure references whcih do not include an explicit owner will assume the object is owned by user INTERCHANGE and this may mean that an object cannot be found.
Here is an example...
Let's say you have a cached table in TimesTen and the table is owned by the user 'CACHEUSER' - CACHEUSER.MyCachedtable.
If you create a PL/SQL procedure owned by the user INTERCHANGE - INTERCHANGE.Someprocedure and within thie procedure include a statement like SELECT * FROM MyCachedtable then when the procedure is executed it will by default always look for the table INTERCHANGE.MyCachedTable even if the user executing the procedure is 'CACHEUSER'. As a result, it would not find the table MyCachedTable in TimesTen and, depending on the setting for PassThrough it might try and go to Oracle for this table.
Another possibility is that the PL/SQL procedure is performing some cache operation that requires interaction with the Oracle DB and you did not include 'OraclePWD=xxx' to provide the password for Oracle when you connected. Remember that the procedure will be executing, by default, as the user INTERCHANGE not as the user 'CACHEUSER'.
Chris

Invalid arguments error while executing oracle procedure

Dear all,
we have a table hr_emp with fields ecode, ename, edoj.
the following procedure we created to return the table data to our .net app.
CREATE OR REPLACE
PACKAGE pname AS
TYPE T_hr_cursor IS REF CURSOR;
PROCEDURE get_hr_list (P_hrlist OUT T_hr_cursor);
END HRPACK;
create or replace PACKAGE BODY pname AS
     PROCEDURE get_hr_list (P_hrlist OUT T_hr_cursor)
     IS
     BEGIN
     OPEN P_hrlist FOR
          SELECT *
               FROM Hr_Emp WHERE edoj>='01-jan-2009';
     END get_hr_list;
END;
these code edited in a single file [both package and package body] and created successfully.
but, while executing, by typing execute get_hr_list, ORA-00304 error, invalid arguments, is coming. How to resolve this, please help.
also, in sql developer 1.5.3, when we create this, another error is ciming like 'source doesnot have a runnable target'.
Where is the issue? please help

Yes, its great dear...
sqlplus>
declare
hr_cursor hrmain.t_hr_cursor;
begin
pname.get_hr_list(hr_cursor);
end;
Its worked as i got 'pl/sql procedure successfully executed'.
Also, then how i can call this get_hr_list procedure from .net? im using c# and i want to get the result of hr_emp to c#. how i can call the same from c#? any help please

Error while executing a procedure in Package

ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package "PLLODS.LK" has been invalidated
ORA-04065: not executed, altered or dropped package "PLLODS.LK"
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1Why did this error arise when I changed a package and recompiled?

This errors occurs when a package was executed in session A, compiled in session B, and then executed again in session A. The package executed in session A is in Oracle buffer, but its definition was changed in session B (which session A is unaware of). Now session A uses the old definition of the package but Oracle checks what is in buffer to the new definition and finds a difference. Therefore, it generates an error:
ORA-04068: existing state of packages has been discarded
and other related errors.
Just execute the procedure (in the package) again and you should not see the error again.
Make sure the stae of the package is valid, that is, when it was recompiled, the package compiled successfully.
Shakti
http://www.impact-sol.com
Developers of Guggi Oracle - Tool for Developers and DBAs

Getting error while executing a procedure and assign the output in BPEL

Hi
I am getting the Following error while deploying BPEL in 10.1.3.1. I have invoked Database Adapter and called a procedure and that procedure returns a output. I have assigned that output to a variable.
empty variable/expression result.
xpath variable/expression expression "/ns2:OutputParameters/ns2:GREETING" is empty at line 98, when attempting reading/copying it.
Please make sure the variable/expression result "/ns2:OutputParameters/ns2:GREETING" is not empty.
Please reply me with Solutions

Hi,
Are you getting this error while deploying or testing ?
Normally this will happen due to namespace mismatch issue. But if you have auto-created the variables then JDev will take care of it so it should not be a problem
Also, please check if this also happens if the code is deployed to 10.1.3.3 ?
Regards,
ketan

Errors while executing a procedure

Im trying to execute following procedure which in turn has two more procedures in it.These two internal procedures calls a java stored procedure.When im trying to execute im getting errors
Errors
PLS-00222: no function with name 'SFDC_LOGIN' exists in this
scope
PL/SQL: Item ignored
PLS-00999: implementation restriction (may be temporary) Java
methods not permitted here
Procedure
CREATE OR REPLACE PROCEDURE account_cur is
procedure new_account(accnumber varchar2,name varchar2,creditstatus varchar2) as language java NAME 'CreateAccount.createAccount(java.lang.String,java.lang.String,java.lang.String) return int';
procedure sfdc_login as language java NAME 'CreateAccount.login()';
CURSOR c1 IS
SELECT name,accnumber,creditstatus FROM account where flag=0
FOR UPDATE OF flag NOWAIT;
result number;
BEGIN
if(sfdc_login) then
FOR i IN c1
fetch c1 into v_name,v_number,v_status
LOOP
result:=new_account(i.v_name,i.v_number,i.v_status);
IF result=1
THEN
UPDATE account
SET flag=1
WHERE CURRENT OF c1;
ELSE
RAISE_APPLICATION_ERROR
(-20222, ‘ACCOUNT CREATION FAILED ');
END IF;
END LOOP;
ELSE
RAISE_APPLICATION_ERROR
(-20221, ‘LOGIN FAILED');
END IF;
END account;
Can any one please suggest me how to resolve this issue.
thanks in advance

Well I suspect (although I have not tried) that Oracle is objecting to you declaring Java methods as local procedures within a procedure.
Generally advice would be that you should use packages rather than standalone stored procedures - in which case you could move the java methods to be separate procedures within the same package.

Error while executing a procedure in pl/sql

Hi,
iam execvuting a procedure in pl/sql and i get the following error,
proc Running: Wed Sep 7 06:13:20 IST 2005
Table truncated.
BEGIN <procedure_name> ; END;
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 75 with name "RBS74" too
small
ORA-06512: at "<procedure_name>", line 104
ORA-06512: at line 1
could anyone explain what has gone wrong in this case???

According to the documentation:
ORA-01555: snapshot too old: rollback segment number string with name "string" too small
Cause: Rollback records needed by a reader for consistent read are overwritten by other writers.
Action: If in Automatic Undo Management mode, increase the setting of UNDO_RETENTION. Otherwise, use larger rollback segments.
Error: ORA-01555: snapshot too old (rollback segment too small)
Cause: This error can be caused by one of the problems, as described below.
Action: The options to resolve this Oracle error are:
This error can be the result of there being insufficient rollback segments.
A query may not be able to create the snapshot because the rollback data is not available. This can happen when there are many transactions that are modifying data, and performing commits and rollbacks. Rollback data is overwritten when the rollback segments are too small for the size and number of changes that are being performed.
To correct this problem, make more larger rollback segments available. Your rollback data for completed transactions will be kept longer.
This error can be the result of programs not closing cursors after repeated FETCH and UPDATE statements.
To correct this problem, make sure that you are closing cursors when you no longer require them.
This error can occur if a FETCH is executed after a COMMIT is issued.
The number of rollback records created since the last CLOSE of your cursor will fill the rollback segments and you will begin overwriting earlier records.

End Of communication Error while executing java procedure (Urgent)

Hi All,
I am using oracle 10g on linux server. Client machine is on xp. I hava a java procedure which executes the sqlldr on server. Earlier it was working fine, but after reinstalling the oracle 10g on server. It started giving "end of Communication channel error". I am not aware that what paramete has to set. Can some body put light on this error.
Bye
Sachin

This is the most frequently asked question from Oracle developers.. Never mind putting some light on this error, I want to put it alight! ;-)
First thing. It is not The Error. It is a sympton of an error.
This message does not come from the database. It comes from the client OCI (of JDBC) drivers - which suddenly discovered that the Oracle connection (usually a TCP socket connection) has been torn down at the server side. It attempts to write to that socket, only to find that the other party has hung up.
Why has the other party hung up? That party is either a Dedicated Server Process or a Dispatcher Process. If a dedicated server dies (crashes), it will take its socket handles with it to The Great Recycle Bin In The Sky. If you was serviced by a shared server and it died, the Dispatcher (who handles the TCP comms for it), will automatically close that shared server's connection.
Usually when a process dies on the Oracle server, it leaves behind an error in the alert log, and trace files. That is where you will find the inklings of what The Error was that caused your client to get the EOF on comms channel message.

Error while executing DB procedure proxy

I am getting error 'Database error text: Insufficient privilege: Not Authorized ' when I call a database procedure proxy in a abap report program.
Can any one help?
CALL DATABASE PROCEDURE zdpp_oia_topandflop
EXPORTING iv_number = lv_number
IMPORTING et_top = lt_top
et_flop = lt_flop
I also tried calling a HANA procedure in an ABAP report program which works fine .
Thanks in advance !,
Sharada

Hi. Sharada GSharada G
I had been got in same problem.
Finally, I solved the issue.
Just follow below steps.
1. Log on your HANA System with HANA Studio (SYSYTEM Account)
2. Add "GET_OBJECT_VERSION" Object Privileges to SAP<SID> Account with only "execute" option.
3. then Everything will be done.
I hope you save a couple of day to settle down this problem.....

Error While Executing Stored Procedure - SAP BPC 5.0

Hi all
I have defined stored procedure 'EP2' in the account transformation rules and which runs fine with all the entities.
But when I filter particular entity which give no data extrace to the selections made instead of giving the comment:
0 rows created and update it gives the error below.
Kindly Help me out if any one has the idea of running stored procedure
Executing SPRUNCALCACCOUNT "[[FINANCE]],[[ACTUAL]],[[LC]],[[SPSCOPE_367693]],[[SPLOG_887033]],[[EP2]]"
SPRunCalcAccount Version 2.06
-ERR- CALC-070 No DATA Extract From FACT Table
Time to run stored procedure:2.8 sec.
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:46 AM
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:47 AM
Edited by: Harish Bysani Kodanda on Mar 14, 2008 8:48 AM

Yes, the business rules stored procedures surface an error if there is an empty data set to operate on.

Error while executing Guided Procedures Action

Similar Messages

Maybe you are looking for