Error while executing report : Error in program CL_RSR_RRK0_CURR

Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.

Hi Prasanna,
             Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay.

Similar Messages

  • Error while executing report in query designer

    Dear Folks,
    I am geting following error while executing report in query designer.
    Error:500 E
    an exception raised because of 0analysis pattern.
    Hence,i am unable to execute any report.
    Need help.
    Thanks

    Hi Kitu G,
    I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
    I would try and do the following:
    - Goto RSA1 > BI Content > BEx Web Template (BTMP)
    - Then double-click on Select Object.
    - Highlight all objects that start with 0ANALYSIS_PATTERN
    - Click on Transfer Selections, and then Install.
    If you can't do the above in prd, do it in DEV, then transport the objects to prd.
    After all this, try re-running your queries.
    Any questions/clarification just let me know
    Cheers.
    Darwin

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • Error while executing Report

    Hi,
    Am getting very strange error while running a report.
    It gives me an 'Autopass' error while inserting some variables in the filter screen.
    Also it shows "system error in program CL RSR WWW RENDERER and form GET VARDEF FOR F4:03.
    Kindly provide your insights on this.
    regards,
    Omprakash

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    In case if you are executing the the report on a multiprovider then check this note below
    Note 1166241 - BRAIN 299 in CL_RSR, form GET_COB_PRO-01-
    hope this helps
    santosh

  • XL Reporter Error While Executing Report

    Dear All,
    I am getting error while running xl reports:-
    A Required COM add-in program for XL Reporter has not been loaded and probhitis Microsoft excel from running.
    Thanks & Regards,
    Pankaj Sharma

    Dear Pankaj Sharma,
    You may check this thread:
    Regarding XL Reporter
    Thanks,
    Gordon

  • Error while executing a Pro*c program

    Hi,
    guys iam trying to execute a Pro*c program, and iam getting the following error
    ld.so.1: cms2sap1: fatal: libclntsh.so.8.0: open failed: No such file or directory
    Killed
    the same executable program was very much working till yesterday, iam on Sun Solaris, so what could be the problem???
    cheere....

    yeah iam running under the same installation,
    anyway i did set the LD_LIBRARY_PATH parameter to $ORACLE_HOME/lib and it did work, i just wonder as to why it became a problem all of a sudden, could someone have manipluated it??? if so how do i find it out???
    cheere.......

  • Error while Executing reports in Portal

    Hello All,
    We are facing the following Error message while running reports in Portal.
    We have recently updated the EP Patch to 17..  since then we are facing the issue.
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
    Log ID
    001A4B0717C8005E0000014900002E07000498168CA315E3
    While checking the KM Content, we are getting the following error:
    Runtime Error
    An exception occured while processing the request.
    Additional information: com/sapportals/wcm/util/uri/RID
    Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97      Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:27_27/12/10_0014_49226950
    Refer to the log file for details about this exception.

    Hi Sneha,
    Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
    If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
    Regards, Arun Jaiswal

  • Error While Executing Report - "Field symbol has not yet been assigned."

    Dear All,
    I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
    Based on this Cube I had developed a report.
    0MRP_CONTRL characteristic filled using 0MATERIAL master data.
    Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
    While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
    Also getting dump in tcode ST22.
    This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
    When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
    Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
    Please help.
    Regards,
    Divyesh Khambhati.

    Hello Shashank,
    Thanks for your reply.
    No material is not checked for authorization relevant.
    Is it required to make 0MATERIAL to be checked as Authorization relevant ??
    I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
    I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
    Divyesh Khambhati
    Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

  • Error while executing Report in BI7.0

    Hello Friends,
    My BI7.0 system is a fresh installation.
    I have created a query using Nw2004s Bi Frontend-Bex Query Designer.
    After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
    The page cant be displayed. & the URL is
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
    Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
    Why am i not able to execute the Bex report in the browser?
    Please let me know
    Thanks
    mv_d

    Further to what Manjunath has pointed out..
    Note Symptom
    After pressing the "Execute" button in Web Application Designer, Query designer or Report Designer, the url is not valid. Possible variations are:
    The server is not included
    The port is not included
    URL is like http:///irj..... (missing server & port)
    Other terms
    URL generation, Execute Query, Execute Web Template, Execute Report
    Reason and Prerequisites
    Missing configuration of the portal. Check following:
          1. Start the transaction SE37
          2. Call the Module RSWAD_URL_GET
          3. Fill the parameters as follows
               I_ACTION: NEW
               I_OBJTYPE: QU
               I_TECHNAME: QUERY
          4. Execute and check the result
          5. E_URL=http://<your expected server>:<your expected port>/irj/...&QUERY=QUERY
    Solution
    If the result is as you expect, the problem is not in the configuration. In other case please do following:
    Run the transaction SE16
    View the table RSPOR_T_PORTAL
    Execute it (expand the width to see the parameter URL_PREFIX)
    Check if there is a prefix for your portal maintained
    If not, correct it editing this table directly.
    For any other configuration problems please read the note 917950
    Hope it helps...
    Arun

  • REP - 300 Error while executing report from Application

    Hi,
    I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
    But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
    Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

    looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

  • Error while executing sender ABAP proxy program in ECC

    Hi,
    We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
    <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="PARSING">GENERAL</SAP:Code>
    <SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at   etc etc
    Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
    Let me know if you need more info.
    Regards,
    N@v!n

    Hi Naveen,
    We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
    And could you please tel me what is the main diff between in these two.
    As we are are using PI 7.31 java stack so for this version what we have to use.
    Thanks,
    Shivdeep Kumar

  • Error while execute report MB5B

    Dear all,
    I try to execute report MB5B in client 350 . all input data is correct format .
    But when i execute this report i get a error like
    " Combination is not possible: VALUATED_STOCK and NO_CANCELLATIONS "
    So can u please help me how can i resolve this problem .
    or my input is may be wrong or any other problem in this execution .
    Please kindly help me out.
    Thanks
    Keyur

    Hi Keyur,
    There are a lot of notes about this tcode, for instance, you can see SAP Note 195786 - MB5B: Collective Note to have an idea about this issue. In coding for AT SELECTION SCREEN you have a lot of coding and you can see in commnets a lot of notes. I suggest you to do a debugging session with the purpose to identify the source of error message. Seach the message in tcode SE91 and set break-points to do it, because in my opinion the problem is caused by the selection.
    I hope this helps you
    Regards
    Eduardo

  • Getting run time errors while executing the copied SAP programs

    Hi folks,
    i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
    i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include  programs.i am copying them to z programs like
    RQ00MF10 copied to z_RQ00MF10
    RQALVF14 copied to z_RQALVF14
    RQALVF16 copied to z_RQALVF16
    RQALVTOP copied to z_RQALVTOP.
    now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
    <b>runtime error---</b>
    The termination occurred in the ABAP program "Z_RQEEAL10" in           
    "SELECT_FIELDS_MANIP2_F16".                                           
    The main program was "Z_RQEEAL10 ".                                                                               
    The termination occurred in line 257 of the source code of the (Include)
    program "RQALVF16"                                                    
    of the source code of program "RQALVF16" (when calling the editor 2570).
    --Error in ABAP statement when processing an internal table.  
    --When changing or deleting one or more lines of the internal table         
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table   
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as                  
    the line index. An index less than or equal to zero is not                
    allowed.                                                                               
    The error can occur when using the following options:                     
    1. "INDEX idx" for specifying the line number in the table                
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"                                 
       where you want to change, insert or delete.                            
    2. "FROM idx" for specifying the start index when deleting a line         
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                
    3. "TO idx" for specifying the end index when deleting a line             
       area from or inserting a line area into the table                      
    "\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".                                                                               
    When the program terminated, the table had 2 lines.                       
    these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
    Thanks & regards

    Hi Madhu,
    I will give you one more check point where you have to give your concentration while copying the standard programs....
    Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
    one more is also here
    You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
    ~~Guduri

  • Error while executting report.

    Hi,
    We are getting this error Abort System error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_ while execution the report for the year 2010.
    Retail Performance Day is restricted with 1 month period.And its throwing above mentioned error.
    But if i remove restriction and create variables then report is generating properly please advice.
    Thanks and Regards,
    Asim

    Buenas estimado
    Yo tuve el mismo problema, pero luego de agotar todas las posibilidades opte por lo mas sano, que era formatear e instalar denuevo. Luego de eso no tuve ningun problema con el XL report
    Aqui te dejo el link del post que hice [Problema en XL Reporter;
    Saludos FLR

  • Error while executing report from Query designer

    Hi All,
    When I am executing from query designer, I am getting following error.
    Even I can't execute it from another portal where i created source system of BI server.
    But i can execute queriew from Query analyser and t-code RSRT.
    When I execute from Query desinger the url is as follows.
    http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
    And the error is:
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Information for Administrator
    To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
    1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
    2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool  does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
    3. When opening any customer message on this issue, please attach:
    Support Desktop Tool support info ZIP  file according to note 937697,*
    Required information for reproduction  according to note 948490.*
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    java.lang.NullPointerException
    java.lang.NullPointerException
    at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
    Details: Full Exception Chain
    System Environment
    Server
    BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info:  - Production mode: true
    BI ABAP unknown
    Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
    Operating System SunOS - amd64 - 5.10
    REgards
    Mohan

    Hi mohan ,
      You can check these OSS notes for the issue  .
    1. 795699 - Customizing default error messages for HTTP
    2. 807000 - Http requests are not fully read after timeout
    3. 804124 - HTTP communication with XI Adapter Engine fails
    Regards,
    Lokesh

Maybe you are looking for