Error while executing report throug web (procedure to run a report through)
Hi experts,
I am executing a report through web. But its not running , displaying an error message "page cannot be displayed".
Please provide me the step by step procedure (settings) to run a report in web.
regards,
Rajesh
Hi Rajesh,
If you just want to execute the report in web, you can do one thing.
Go to Query designer of your relevent system.
Open the Query which you want to execute in Web.
Then in the Query tab(first one) in the drop down list you have the Option 'execute'./ the 5th Icon in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
Upon providing them the query start executing if it deosn't have any selections, else selection screen appears.
You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
Hope this helps.
Regards,
Ganesh Thota
Similar Messages
-
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Error while executing report : Error in program CL_RSR_RRK0_CURR
Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay. -
Hi,
Am getting very strange error while running a report.
It gives me an 'Autopass' error while inserting some variables in the filter screen.
Also it shows "system error in program CL RSR WWW RENDERER and form GET VARDEF FOR F4:03.
Kindly provide your insights on this.
regards,
OmprakashHi , could you please check note 1166294 and check if the issue will be fixed ?
1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
In case if you are executing the the report on a multiprovider then check this note below
Note 1166241 - BRAIN 299 in CL_RSR, form GET_COB_PRO-01-
hope this helps
santosh -
Error while executing Report in BI7.0
Hello Friends,
My BI7.0 system is a fresh installation.
I have created a query using Nw2004s Bi Frontend-Bex Query Designer.
After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
The page cant be displayed. & the URL is
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
Why am i not able to execute the Bex report in the browser?
Please let me know
Thanks
mv_dFurther to what Manjunath has pointed out..
Note Symptom
After pressing the "Execute" button in Web Application Designer, Query designer or Report Designer, the url is not valid. Possible variations are:
The server is not included
The port is not included
URL is like http:///irj..... (missing server & port)
Other terms
URL generation, Execute Query, Execute Web Template, Execute Report
Reason and Prerequisites
Missing configuration of the portal. Check following:
1. Start the transaction SE37
2. Call the Module RSWAD_URL_GET
3. Fill the parameters as follows
I_ACTION: NEW
I_OBJTYPE: QU
I_TECHNAME: QUERY
4. Execute and check the result
5. E_URL=http://<your expected server>:<your expected port>/irj/...&QUERY=QUERY
Solution
If the result is as you expect, the problem is not in the configuration. In other case please do following:
Run the transaction SE16
View the table RSPOR_T_PORTAL
Execute it (expand the width to see the parameter URL_PREFIX)
Check if there is a prefix for your portal maintained
If not, correct it editing this table directly.
For any other configuration problems please read the note 917950
Hope it helps...
Arun -
Error while executing Secure SOAP web service from Web Service Navigator
Hi All,
I have created a web service for a stateless session bean choosing option "Secure SOAP".
When I am testing it through web service navigator, it is showing following error:-
Security: Authentication expected but missing
And in response text it is showing following :-
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Wed, 17 Dec 2008 05:42:10 GMT
Set-Cookie: <value is hidden>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >
<SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Server</faultcode><faultstring>Security: Authentication expected but missing</faultstring><detail><ns1:com.sap.engine.interfaces.webservices.runtime.ProtocolException xmlns:ns1='http://sap-j2ee-engine/error'>Security: Authentication expected but missing</ns1:com.sap.engine.interfaces.webservices.runtime.ProtocolException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
Can anybody help me with above thing?
And my second question : I have created web service with "Basic Auth SOAP" option. and while executing at web service navigator, its asking for username & password.
What role / right should be granted to this user so as to make him able to execute this web service? This user must be a UME user, correct?
Pls help me in resolving this.
Thanks and regards,
Amey MogareHi Fazal,
I have read the thread, but my questions are still unanswered.
1. I know how to set username and password while using "Basic Auth SOAP" protocol. But my question in this case is what are the accesses user requires to be able to execute web service.
2. And about Secure SOAP, why is above mentioned error is appearing?
Thanks and regards,
Amey Mogare -
REP - 300 Error while executing report from Application
Hi,
I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.
-
XL Reporter Error While Executing Report
Dear All,
I am getting error while running xl reports:-
A Required COM add-in program for XL Reporter has not been loaded and probhitis Microsoft excel from running.
Thanks & Regards,
Pankaj SharmaDear Pankaj Sharma,
You may check this thread:
Regarding XL Reporter
Thanks,
Gordon -
Error while execute report MB5B
Dear all,
I try to execute report MB5B in client 350 . all input data is correct format .
But when i execute this report i get a error like
" Combination is not possible: VALUATED_STOCK and NO_CANCELLATIONS "
So can u please help me how can i resolve this problem .
or my input is may be wrong or any other problem in this execution .
Please kindly help me out.
Thanks
KeyurHi Keyur,
There are a lot of notes about this tcode, for instance, you can see SAP Note 195786 - MB5B: Collective Note to have an idea about this issue. In coding for AT SELECTION SCREEN you have a lot of coding and you can see in commnets a lot of notes. I suggest you to do a debugging session with the purpose to identify the source of error message. Seach the message in tcode SE91 and set break-points to do it, because in my opinion the problem is caused by the selection.
I hope this helps you
Regards
Eduardo -
DISPLAYING PARAMETER LAYOUT WHILE EXECUTING REPORTS THROUGH WEB
Good Day all,
With reference to the above subject i would like to ask for help that how can i get the parameter screen when a user/clients runs reports through browser web ?.
i hardcoded in the source and deployed on the server,its working perfectly.
I need to define the parameters,is there n e way/s please assist.
second is there any method/s or example by which i can call report through form server,
the form server is working ok.. need to call a report through this form ,
please assist with your earliest
awaiting for your earliest and positiver response regardsMohd,
(1). To display parameter form in web, you can either pass parameter "paramform=yes" in url, or specify %P in corresponding key of the cgicmd.dat file.
(2). To call Reports from Forms, you can either call reports 9i server directly (via run_report_object), or via web.show_document() to call the cgi/servlet.
Regards,
-Jeff -
ERROR WHILE SENDING REPORT THROUGH EMAIL .....
DEAR ALL
i have one problem . i am trying to send my report through e-mail.i am working with forms 5.0 and report 3.0 . i am calling report from form.when a client click on the button a report will be generated and this will be send to a specific person in a specific format either in html or pdf.
but when i click on button it initialize the report and gives the error
rep-4201 : error occured while initialize the mail subsystem.
rep-4220 : there is a problem with the mail subsystem.
if anyone of u have the solution for this please send to me.it will be very much helpfull if you send me the code.
thanks in adv.
D prasad.
nullwell you will have to configure a default mail client on your machine. you can do this by going to control panel->mail in windows os.
you might also need a .dll file mapi*.dll something. you will need this .dll file in your client machine.
best of luck -
Error While executing a SSIS package which contains a script task through SQL Server Agent job
Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddyHi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy -
Error while executing report from Query designer
Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
MohanHi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh -
Error while executing Report migrated from 6i to 11g
Hello,
We have migrated forms & reports from 6i to 11g.
Most of the reports work fine but we are having issue with very few reports.
Let me explain the issue here:
We have a Form that Runs a report.
The Report has a PLL which loads a C library and calls a C Function. [using ORA_FFI]
The C Function which is called has embedded SQL in it.
The Report Server Engine crashes on encountering the first Executable SQL statement. [A Select or Insert]
Need help to resolve this as we have tried a lot of things and not been successful.
Below is a gist of the errors we see in teh Report server logs:
"console~rep_test~1.log"
Nov 14, 2012 7:37:11 AM com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl <init>
WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 190.10.97.30; port: 57343"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
... 23 more
===============================================================================================================================
"rwserver_diagnostic.log"
[2012-11-14T07:37:10.969+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:updateEngineState Engine rwEng-0 status is 3
[2012-11-14T07:37:10.969+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] EngineInfo:setState Engine rwEng-0 state is: Running
[2012-11-14T07:37:11.294+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe [[
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2400)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2418)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:354)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.handleEvent(SocketOrChannelConnectionImpl.java:1124)
at com.sun.corba.se.impl.transport.SelectorImpl.run(SelectorImpl.java:289)
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 211 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2484)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2502)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:116)
at com.sun.corba.se.impl.transport.CorbaContactInfoBase.createMessageMediator(CorbaContactInfoBase.java:150)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:314)
... 2 more
Caused by: java.io.IOException: End-of-stream
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readFully(SocketOrChannelConnectionImpl.java:602)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:521)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:112)
... 4 more
[2012-11-14T07:37:11.296+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No [[
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
Caused by: java.net.ConnectException: Connection refused
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
... 23 more
[2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] EngineInfo:setState Engine rwEng-0 state is: Shutdown
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:32] [REP-56047] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] EngineManager:remove Reports Server shut down engine rwEng-0.
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:start Using Maximum Job Retry value = 0
[2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56016] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Job 1658 status is: The report terminated with error: [[
REP-56048: Engine rwEng-0 crashed., job Id: 1658.
[2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF Number of Break Index values=1
[2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF String= Engine rwEng-0 crashed., job Id: 1658 strlen=37
[2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:notifyWaitingJobs Master job 1658 notify its duplicated jobs.
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Finished updating job: 1658
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:runJobInEngine Encounted exception in job 1658
[2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] ConnectionImpl:runJob jobid = 1658 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2012-11-14T07:37:11.318+01:00] [reports] [NOTIFICATION:16] [REP-56013] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] ConnectionManager:release Connection 239 is released.
[2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [REP-56020] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Launching engine rwEng-0.
[2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine OS Name = Linux : OS Arch = amd64
[2012-11-14T07:37:11.383+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:spawnEngine Start engine command line = /utility/app/oracle/product/fmwfr/formsreports1/config/reports/bin/rwengine.sh -server -cp /utility/app/oracle/product/fmwfr/formsreports/reports/jlib/rwrun.jar -Dcomponent.path=rep_test -Doracle.reports.component=rwEng-0 -Dinprocess.server=false -Duser.language=it -Duser.region=IT -Xms512m -Xmx512m -Xss512k oracle.reports.engine.RWEngine name=rwEng-0 server=rep_test ORACLE_HOME=/utility/app/oracle/product/fmwfr/formsreports engineimplclass=oracle.reports.engine.EngineImpl cacheDir=/utility/app/oracle/product/fmwfr/formsreports1/reports/cache diagnosis="yes" keepConnection="yes" server_ior="/test/orafood/tmp/rep_test_129261664_1352875031383"
[2012-11-14T07:37:11.386+01:00] [reports] [NOTIFICATION:16] [REP-56021] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Engine rwEng-0 has been launched.
====================================================================================================================
Regards,
KVS
I can post the other logs if it helps.Hi Rajesh,
If you just want to execute the report in web, you can do one thing.
Go to Query designer of your relevent system.
Open the Query which you want to execute in Web.
Then in the Query tab(first one) in the drop down list you have the Option 'execute'./ the 5th Icon in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
Upon providing them the query start executing if it deosn't have any selections, else selection screen appears.
You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
Hope this helps.
Regards,
Ganesh Thota -
Error while Executing reports in Portal
Hello All,
We are facing the following Error message while running reports in Portal.
We have recently updated the EP Patch to 17.. since then we are facing the issue.
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
Log ID
001A4B0717C8005E0000014900002E07000498168CA315E3
While checking the KM Content, we are getting the following error:
Runtime Error
An exception occured while processing the request.
Additional information: com/sapportals/wcm/util/uri/RID
Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97 Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:27_27/12/10_0014_49226950
Refer to the log file for details about this exception.Hi Sneha,
Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
Regards, Arun Jaiswal
Maybe you are looking for
-
Need help diagnosing kernel panic error 10.7.5
I have a 2011 MacBook Pro running OS X Lion 10.7.5 Kernel panic error happened three times while using Microsoft Word, this is the data from the last kernel panic error: Mon Mar 30 19:08:03 2015 panic(cpu 0 caller 0xffffff80002c4dd5): "Double fault a
-
Lightroom "folders" section, eveything disappeared, how do I get the files back?
Technically I believe the files are still within lightroom, and still on my hard drive. Under Catalog "All Photographs" it has all the ones I've ever imported to Lightroom. I was doing something and right clicked under the folders tab, thinking I was
-
Hi,guys,how to disable a downloaded pdf openned by Acrobat automatically?
Hi, guys. Whenever a pdf is downloaded by IE, it will be openned by Acrobat automatically. This disturbs me to download the next pdf. Is there any way to disable it? Thank you very much!
-
Hello , I am getting following message ''In Unicode programs, the "Ó" character cannot appe 20 RELACIÓNIE(000050)'' when i am trying to call another ALV output from one layout using USER_COMMAND in French language. In english language , the program
-
While installing CS6, I got an installation message 49. What do I do now?