Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Similar Messages

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report

Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
Laxman

Hi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran

SSRS Error while executing the report

Hi,
dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
URL.
Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
i can see the above log in reporting services log files, does anyone having the idea about this?
Thanks
Veera
Thanks
Veera

Hi Veera,
According to your description, when you run the report, you get XMLDPException and 500 error.
In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

Error while executing the Report( Need your help gurus) !!!

Hi,
Today morning when i was checking the report for monthly data i,e from 1sept to 28th sept.
I got this below error msg. Can you pls guide me why its throwing an error.
Error SQL Error: 1555
Error Error when generating the SQL statement
Error Error reading the data of InfoProvider POS_IS1
Cancel System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Points Assured.
Urs,
RK.

hi,
There is some time limit set for the request to run when you run a program in the foreground or in the background. If the time limit exceeds this will occur, run the program again then this might not happen.
This might be related to table space issue, or roll area or memory. Show the short dump (ST22) to your Basis person and tell me to adjust/increase the respective tablespace .
Regards
Pankaj

Error while executing the report

Hello Frineds..
Need some help once again .
When the user is executing the query , he is getting below error.sometimes.
could please tell me why it is so ?
Warning Result from ZPOS_C10 removed( attempt1) , Reorgenzation during reading.
Abort sys error - RSDRC ERROR in RSDRC_NUMC_BASIC_QUERY_DATA_ZPOS_C10 60
Abort sys error in prog RSDRC_NCUM_ROUTINES and form READ_DELTA_1
Could please tell me why it has happend ..and how can we improve the situation in next time
Thanks in advance
Regards

Hi Akshay,
I guess the error occurs since you made a change to the Data target - possibly removing/replacing a info-object.
Try this sequence:
1. Open the query in change mode and resave it.Now execute it and check.
2. If error still occurs then try executing the query in RSRT and check the error and analyze or post here.
Hope this helps.
Bye
Dinesh

Getting error while executing the report in WEB

Hello Experts,
I have did validation in my report on selection screen, if that validation is successful then only we can see the report output
otherwise it's give the error message.
Validations are working query designer and RSRT but when I run the report in WEB then even if the validation is successful then also I am getting the error message and not able to see the report output.
I have written the code in user exit for validation.
Can any one tell me why it is so?
what needs to do?
Thanks
Chetan

Hi.
Could you plz explain your validation logic and wich way it done ?
Could you plz provide error message ?
Regards.

Error while opening the report.

hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
 500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
System Environment
Server
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
Context
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
Full Exception Chain
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.M

hi,
 Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error while executing the workbook query.

Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil Vadde

Hey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error while executing the report FAGLB03

Similar Messages

Maybe you are looking for