Error while exporting data into Excel Sheet

Hi All,
I have created a VO which is based on Query(Not based on EO) and the Query is as follows:
select f.user_name ,
f.description ,
a.currency_code,
a.amount_to ,
a.amount_from
from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
where f.user_id = a.user_id
and a.document_type = 'CM'
order by 2;
Based on this VO I have created a search page which will search and returns data from the table and finally standard export button will export the data into excel sheet.
In this am searching the data based on above 5 attributes. Without entering anything in the messageTextInput if i am clicking GO button, it is returning all the data into the table region. After this if i click on Export Button, data are getting exported into Excel Sheet. It is fine.
But if i am searching the data by entering any value in any of the messageTextInput, it is returning data. But if i am clicking the Export Button then it is throwing the following error:
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select f.user_name ,
f.description ,
a.currency_code,
a.amount_to ,
a.amount_from
from seacds.ar_approval_user_limits_nv a , seacds.fnd_user_nv f
where f.user_id = a.user_id
and a.document_type = 'CM'
order by 2) QRSLT WHERE (( UPPER(CURRENCY_CODE) like UPPER(:1) AND (CURRENCY_CODE like :2 OR CURRENCY_CODE like :3 OR CURRENCY_CODE like :4 OR CURRENCY_CODE like :5))) ORDER BY DESCRIPTION asc
     at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
     at OA.jspService(_OA.java:71)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.sql.SQLException: Invalid column type
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:175)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:240)
     at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7895)
     at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7572)
     at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8183)
     at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:8206)
Kindly give me any idea to clear this error.
Thanks and Regards,
Myvizhi

Hi Myvizhi ,
Did you try running the query from back end that got generated in the error trace ? see if that query is returning desired
output .
Also would like to know if you are using oracle standard search mode i.e result based search / auto customization search ?
--Keerthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • ClassNotFoundException: while exporting data into excel sheet

    Hi Experts,
    While exporting data into excel sheet below error was getting even i am created jar file DC and publicpart AND j2ee
    I have to deployed the JAR files on the server:
    1. Created "External Library DC"
    2. added my JAR files into "Libraries" folder.
    3. Exposed them as Public Part.
    4. Created "J2EE Library DC"
    5. Refered "External Library DC" into J2EE Library DC.
    6. Deployed "J2EE Library DC"
    7. and lastly refered this on my Web Dynpro DC by giving Library Reference.
    but still this is the errro was getting, plz any one can help regarding this what could be the problem
    java.lang.ClassNotFoundException: org.apache.poi.hssf.usermodel.HSSFWorkbook -
    Loader Info -
    ClassLoader name: [ng.com/Reuse_Export_to_Excel] Parent loader name: [Frame ClassLoader] References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization sap.com/tcwddispwda sap.com/tcwdcorecomp service:webdynpro service:sld library:tcddicddicservices library:com.sap.aii.proxy.framework library:tcgraphicsigs library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:com.sap.aii.util.misc library:tccmi Resources: /usr/sap//JC21/j2ee/cluster/server0/apps/ng.com/Reuse_Export_to_Excel/src.zip /usr/sap//JC21/j2ee/cluster/server0/apps/ng.com/Reuse_Export_to_Excel/webdynpro/public/lib/ng.comReuse_Export_to_Excel.jar Loading model: {parent,references,local} -
    Regards,
    Varma

    closed

  • Problem while exporting data to Excel sheet.......

    Hi
    I have written the following code to export data to excel sheet...
    data:
           conv_out TYPE REF TO cl_abap_conv_out_ce,
           content TYPE xstring.
    data : itab_slsrl type table of znslsrlitm.
    data: xml_out TYPE string.
    Data:
    Node_slsrl type ref to If_Wd_Context_Node,
    Elem_slsrl type ref to If_Wd_Context_Element,
    Stru_slsrl type ref to if_wd_context_element .
    call transformation ('ID') source tab = itab_slsrl[] result xml xml_out.
    CALL FUNCTION 'CRM_IC_XML_STRING2XSTRING'
    EXPORTING
    INSTRING = xml_out
    IMPORTING
    OUTXSTRING = content.
    conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' ).
    DATA: lv_filename TYPE string.
    conv_out->convert( exporting data = xml_out IMPORTING buffer = content ).
    cl_wd_runtime_services=>attach_file_to_response(
    i_filename = 'Sales_order_release.xls'
    i_content = content
    i_mime_type = 'application/msexcel'
    i_in_new_window = i_in_new_window
    i_inplace = i_inplace ).
    But when i am trying to export data to excel sheet i am getting
    following error...
    "Switch from current encode to specified encoding is not supported"
    "<?xml version="1.0" encoding='utf-16"?>"
    if i change encoding utf-8 to utf-16 in my code its giving dump..
    "The conversion of certain code pages is not supported"
    Did i miss any step...?
    How to resolve this problem please help me....
    Thanks & Regards
    Sowmya.....

    Hi Sowmya,
    I do had a similar issue, but I avoided that problem temporarily by commenting the following code.
        l_conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8'  ).
    attach the first file
    l_conv_out->convert( exporting data = l_xml_out IMPORTING buffer = l_content  ).
    Once this is done, you can export the data to Excel and open it and see too...But this is a temporary solution only. Implement this solution to get to understand more flaws of this.
    Regards
    Raja Sekhar
    Edited by: Raja Sekhar on Dec 26, 2007 7:51 PM

  • Export Data into Excel Sheet in UNIX

    Hi All
    How to export the table data into excel sheet in unix.
    Thanks

    Create a csv file. A csv file is just an ascii file, so it doesn't matter what OS you are on.

  • Error while downloading data into excel file.

    Hi,
        I have a requirement to download data available in xstring to excel file.
    I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
    from web dynpro abap application it gives data out pout in xstring format.
    I am opening excel file using that xstring data as below
    cl_wd_runtime_services=>attach_file_to_response(
    i_filename = 'file.xls'
    i_content = ls_data_source-data_source   ***[xstring data from RFC]
    i_mime_type = 'x-excel/application'
    i_in_new_window = abap_true ).
    But excel file not coming in correct format. its  giving an error while download
    excel file
    Error is
          " the file you are trying to open , 'file[1].xls', is in a different format than
    specified by the file extension. Verify that the file is not corrupted and is from
    a trusted source before opening the file. Do you want to open the file now? "
    If i click on 'YES' button file opening but not in proper excel format. Data is coming
    in tab delimiter format in excel file.
    Please suggest any solution for this problem.
    Thanks,
    Venkat.

    Hi Thomas,
    Following is the logic implemented in RFC which is giving XSTRING as export parameter
    STEP1      create a dynamic internal table
               Create field catalog for the table   using LVC_FIELDCATALOG_MERGE
                   CALL METHOD cl_alv_table_create=>create_dynamic_table
                        EXPORTING
                           it_fieldcatalog = it_fieldcat
                         IMPORTING
                           ep_table        = dyn_table.
                  CREATE  EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
    STEP2 # Convert text table to xstring.
            CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
              IMPORTING
                buffer   = l_content
              TABLES
                text_tab = lt_data_tab
              EXCEPTIONS
                failed   = 1
                OTHERS   = 2.
    STEP3  *# Psss Data to Netweaver
              PERFORM pass_data_to_nw USING is_import
                                      CHANGING es_attachment_metadata.

  • Exporting data into excel sheet from CRM

    Hi All,
    I am facing problem while extracting data from CRM - Service Process Monitor.
    I tried to extract data(records) from executed service process monitor through
    System -> List ->Save->Local file->Spreadsheet
    I am not getting actual records list in excel sheet
    For example: Actual record - 244, But after extracting to excel sheet its showing only- 199
    why its not extracting remaining 45 records/ transactions.
    is there any setting or is there any other process of extracting ?
    How to count total records without extracting to excek sheet ?
    Please help me..
    Regards
    Praveen Khot

    Hi
    check the link below
    https://www.sdn.sap.com/irj/sdn/crm-elearning
    Reward points if helpful
    Dinaker vikas

  • Error while expoting data from excel sheet

    I get error message as *'1 error has occurred. The identified column name is an Oracle reserved word. Please choose another name'.
    The column names are :
    SYSTEM_APPLICATION
    SYSTEM_COMPONENT     
    STACK_RELEASE
    RAISED_DATE
    RELEASE_GO_LIVE_DATE
    FP
    DEFECTS_CATEGORY
    S1_NOGO
    S2_INTERRUPTION
    S3_VISIBLE
    S4_NOIMPACT
    Could you please guide me where the problem would be .....
    Regards,
    Manoj

    Hi Myvizhi ,
    Did you try running the query from back end that got generated in the error trace ? see if that query is returning desired
    output .
    Also would like to know if you are using oracle standard search mode i.e result based search / auto customization search ?
    --Keerthi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014

    we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
    error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
    I am confused about Configuring the Analysis Service in SharePoint Mode.
    What account should be used for Configuring the Analysis Service in SharePoint Mode?
    what are the steps and what permissions are required and where to add it?
    can you please explain in detail so i can make sure about my account permission properly in my environment?
    Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
    it is mentioned here to have two services are running under manages services under sharepoint central,
    https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
    but we don't have SQL Server Analysis Services
    running under  Manage
    services on server.
    what need to be done here to fix this issue ?
    Thanks,
    Deepak Patel

    Hi Deepak,
    We are currently looking into this issue and will give you an update as soon as possible.
    Thank you for your understanding and support.
    Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
    http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to  send ALV output data into Excel sheet format via Mail to the user?

    Hi friends,
    I have a doubt ie,
    How to  send ALV output data into Excel sheet format via Mail to the user?
    regards
    Moosa

    Hi,
    Provide the output internal table to the objbin in the below FM
    Send Message
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                document_data              = i_docdata
                put_in_outbox              = c_x
           TABLES
                packing_list               = i_objpack
                object_header              = i_objhead
                contents_bin               = i_objbin
                contents_txt               = i_objtxt
                receivers                  = i_reclist
    and specify the document type
      i_objpack-doc_type   = 'XLS'.
    and try.
    Regards,
    Nandha

  • How export report into excel sheet automatically using SSRS 2010?

    Hi,
    I have created many reports using SQL Server Data Tool 2010 and at my work, we are using active batch to ran reports every month.
    Now question is, my boss want me to set up reports such a way that when active batch is ran, reports should be exported into excel sheet automatically with the default values given for parameters at some specific folder location. How can I export report
    into excel sheet automatically when active batch is executed?
    Please help me on this. Thanks for the help in advance.
    Vicky

    Check this:
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = 'C:/test.xls'
          filetype                = 'ASC'
          write_field_separator   = 'X'
        TABLES
          data_tab                = t_output
    Regards.

  • Download Sales Contract data into Excel sheet

    Hi,
    I need to download the Sales Contract Data into excel sheet is there a Function module that i can use?? Else how do i go about it. Kindly help.
    Thanks,
    Riya.

    use the function module FUNCTION 'GUI_DOWNLOAD'
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = 'C:\REPORT.XLS'
    FILETYPE = 'ASC'
    APPEND = ' '
    WRITE_FIELD_SEPARATOR = 'X'
    HEADER = '00'
    TRUNC_TRAILING_BLANKS = ' '
    WRITE_LF = 'X'
    COL_SELECT = ' '
    COL_SELECT_MASK = ' '
    DAT_MODE = ' '
    CONFIRM_OVERWRITE = ' '
    NO_AUTH_CHECK = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    WRITE_BOM = ' '
    TRUNC_TRAILING_BLANKS_EOL = 'X'
    WK1_N_FORMAT = ' '
    WK1_N_SIZE = ' '
    WK1_T_FORMAT = ' '
    WK1_T_SIZE = ' '
    IMPORTING
    FILELENGTH =
    tables
    data_tab = IT_PR
    FIELDNAMES =
    EXCEPTIONS
    FILE_WRITE_ERROR = 1
    NO_BATCH = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE = 4
    NO_AUTHORITY = 5
    UNKNOWN_ERROR = 6
    HEADER_NOT_ALLOWED = 7
    SEPARATOR_NOT_ALLOWED = 8
    FILESIZE_NOT_ALLOWED = 9
    HEADER_TOO_LONG = 10
    DP_ERROR_CREATE = 11
    DP_ERROR_SEND = 12
    DP_ERROR_WRITE = 13
    UNKNOWN_DP_ERROR = 14
    ACCESS_DENIED = 15
    DP_OUT_OF_MEMORY = 16
    DISK_FULL = 17
    DP_TIMEOUT = 18
    FILE_NOT_FOUND = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR = 21
    OTHERS = 22
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDIF.

  • Update the data into excel sheet .

    Hi Friends..
    If I run the program it want to store the data into  excel sheet(first few lines) , if i run the program again I want to store the next result in the same excel sheet after that data(first time data).
    is it any solution available to store the data in the same excel sheet again again in different row of that excel sheet.
    Thanks
    Gowrishankar

    Hi,
    I am not sure which FM u r using for downloading. The FM GUI_DOWNLOAD will work for your requirement. Set the parameter Append to value 'A'. Every time it will append the data to ur file.
    Check below code.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      BIN_FILESIZE                  =
        filename                      = l_file
      FILETYPE                      = 'ASC'
       APPEND                        = 'A'
      WRITE_FIELD_SEPARATOR         = ' '
      HEADER                        = '00'
      TRUNC_TRAILING_BLANKS         = ' '
      WRITE_LF                      = 'X'
      COL_SELECT                    = ' '
      COL_SELECT_MASK               = ' '
      DAT_MODE                      = ' '
    IMPORTING
      FILELENGTH                    =
      tables
        data_tab                      = i_tab
    EXCEPTIONS
       FILE_WRITE_ERROR              = 1
       NO_BATCH                      = 2
       GUI_REFUSE_FILETRANSFER       = 3
       INVALID_TYPE                  = 4
       NO_AUTHORITY                  = 5
       UNKNOWN_ERROR                 = 6
       HEADER_NOT_ALLOWED            = 7
       SEPARATOR_NOT_ALLOWED         = 8
       FILESIZE_NOT_ALLOWED          = 9
       HEADER_TOO_LONG               = 10
       DP_ERROR_CREATE               = 11
       DP_ERROR_SEND                 = 12
       DP_ERROR_WRITE                = 13
       UNKNOWN_DP_ERROR              = 14
       ACCESS_DENIED                 = 15
       DP_OUT_OF_MEMORY              = 16
       DISK_FULL                     = 17
       DP_TIMEOUT                    = 18
       FILE_NOT_FOUND                = 19
       DATAPROVIDER_EXCEPTION        = 20
       CONTROL_FLUSH_ERROR           = 21
       OTHERS                        = 22
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks,
    Vinod.

  • Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014 using BISM file connection

    I am getting following error while refreshing connection on excel sheet in power pivot gallery,
    my scenario,
    using BISM file connection to create and  refresh power pivot excel sheet in power pivot gallery
    throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
    Microsoft.AnalysisServices.ChannelTransport is not available. 
    i found error in event viewer,
    "Activation context generation failed for "C:\Program Files\Microsoft Analysis
    Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
    Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    what should i do to fix it?
    Thanks for help.
    Deepak Patel

    Rebecca,
    yes, this is issue i am getting.
    Activation
    context generation failed for "C:\Program
    Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
    Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    let me know if you can find fix for it.
    THanks,

  • Error while exporting data

    i get the following error while exporting data evn after running catexp.sql
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    can anyone help me on this

    copy past from the notes referred above -
    Symptom(s)
    ~~~~~~~~~~
    You are performing a database export against your 9.2 database. The database
    export abnormally ends with the following errors:
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
    SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    Change(s)
    ~~~~~~~~~~
    One of the known causes for the error above is that a patchset was recently
    applied to the database but one or more of the patchset steps were not
    performed.
    Cause
    ~~~~~~~
    View the readme notes for the patchset recently installed. You will see a step
    that should have been performed that directs you to run the script named
    catpatch.sql. Very likely this step was never performed.
    Fix
    ~~~~
    As the sysdba user run the catpatch.sql script found in the directory named
    $ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
    You may see that this script places the database in restricted mode.
    rgds

  • How to downlaod vednor master data into excel sheet in SAP Application serv

    Hi friends
    I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
    Please help me.
    Thanks

    Hi Ramesh,
    It is not possible to download data in Excel file on application server. You can better download the same in tab separated text file and then convert that text file to XLS.
    Please do not open multiple threads for same problem.
    Regards,
    Atish

Maybe you are looking for

  • Creation of offline cubes from pivot table[Automation]

      I have a pivot table on which i can slice data based on 3 different users so i create the offline cube for each of them independently using Analyse->OLAP Tools->Offline OLAP. So i need to repeat this process 3 times since each time i only select on

  • Cannot drop a column

    Hi, I am having a problem with dropping a column from a table. I am using 10g (10.2.0.1.0). Whenever I try to drop a column I got this error: ORA-39726: unsupported add/drop column operation on compressed tables Then I tried to drop it in a way that

  • Powershell change hostname in a joined domain

    Hi, I use the powershell to change a machine name, I use $name as variable to input a name and the follow cmd-let: $computerName.Rename($name) but it only work in a unjoined domain machine. my script is the following: $computerName = Get-WmiObject Wi

  • Cannot extract CS5 Web Premium Installation files

    I recently purchased a new laptop that does not have an optical drive. As such, I have downloaded the two files from the Adobe site (Download CS5 products) several times. For some reason, the first file set cannot be extracted. It is in 7z format and

  • WinXP reboots caused by a device driver problem??

    Hi All the experts there, I recently bought and installed a MSI 865GM2-LS Motherboard. However, after I installed WinXP, as each time I get onto the web, system reboots and telling me it's caused by a device driver. I installed every device drivers p