Error while extracting data from ODS using Infospokes - URGENT
Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.
Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini
Similar Messages
-
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Facing Issue while Extracting Data from Essbase using CalcScript
Hi All,
we are getting this error while extracting data from Essbase by CalcScript using ODI.
Does anyone have the answer
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx5046.f$0(<string>:1)
at org.python.pycode._pyx5046.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030009): Name too long (C:\NewFolder\ACAD) in ESSAPI function EssCalcFile
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)Hi Now i am getting this error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 1, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx5054.f$0(<string>:1)
at org.python.pycode._pyx5054.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
at com.hyperion.odi.essbase.wrapper.EssbaseCalcDataIterator.init(Unknown Source)
... 33 more
Caused by: com.essbase.api.base.EssException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect.essMainCalcFile(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
at com.essbase.api.session.EssOrbPlugin.essMainCalcFile(Unknown Source)
at com.essbase.api.datasource.EssCube.calculate(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseApplication.executeCalculationScript(Unknown Source)
... 34 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1030214): User [admin] cannot access calc script: ACAD
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.h.A(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595) -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Error While extracting data from FIAA and FIAP
Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
PrasadHello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael -
Error while extracting data from Generic datasource
Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
SonuHello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu -
Error while extracting data from Generic VBAK Table
Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
" in
line 159:
"The type of the database table and work area (or internal table) "L_ST"
"R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M. -
Error while extracting data from a remote system
Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
ThanksHi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya -
Error while extracting data from essbase
Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx85.f$0(<string>:1)
at org.python.pycode._pyx85.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.A(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
C14_HSP_RATES VARCHAR2(80) NULL,
C3_ACCOUNT VARCHAR2(80) NULL,
C10_PERIOD VARCHAR2(80) NULL,
C7_SCENARIO VARCHAR2(80) NULL,
C9_CURRENCY VARCHAR2(80) NULL,
C15_YEAR VARCHAR2(80) NULL,
C6_DATATYPE VARCHAR2(80) NULL,
C2_VERSION VARCHAR2(80) NULL,
C1_CATEGORY VARCHAR2(80) NULL,
C12_ENTITY VARCHAR2(80) NULL,
C13_ENTITY VARCHAR2(80) NULL,
C11_DEPARTMENT VARCHAR2(80) NULL,
C8_PROJECT VARCHAR2(80) NULL,
C5_DATA NUMBER(18,8) NULL
Appriciated!Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error While Deleting Data From ODS
Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
Program SAPLRSAC
Include LRSACU75
Row 535
Module type (FUNCTION)
Module Name RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work. -
Error while uploading data from ODS to Cube
Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar -
Error while extracting data from CRM
Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira AnandHi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS = CLNT645BIP
REQUNR = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished -
Error While Loading data from ODS to Infocube
I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RRIn Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R -
Error while loading data from ODS to IC.
Hi Experts,
I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro -
Error while laoding data from ODS to infocube
Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
o Transformation ID
o Data record number of the source record
o Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the stepsThanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem
Maybe you are looking for
-
How to change the default hint box color?
How to change the default hint box color on the default Metal LookAF? I'm trying looking for something with javax.swing.UIManager, but i just find ways to translate the UI. Any idea?
-
Need help in Oracle Please Assist..
hi.. i am a new user to oracle, i have reached a problem. ORA-28000: this account is locked i am unable to login as they say my account is locked... i was told to go to that user account via Oracle Enterprise Manager Console with SYSDBA previlage the
-
Cant save down from CS4 to CS3
I'm having issues with my Illustrator CS4. It's recently stopped saving files down to CS3. Says "Can't Save File" when I try to save it down to CS3. Thanks in advance for any suggestions!
-
Third-party keyboard in app store
when I try to review in the app store with a third-party keyboard , the page turns white , and I can not see what I write
-
Hi! I finally got all 70,000 images into aperture and all was well until I decided to move some images from one project to another. Now I get some preview images and lots of grey boxes. If I select an image represented by a grey box, it will load, so