Error while extracting from BI source
Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit
There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw
Similar Messages
-
Error while extracting from source type InfoProvider)
Dear Sdns,
Am trying to load the data from the exisitng standard cube to one new ZCUBE.. The time when am loading the data. am getting the following errors...
<b>- Data package processing terminated
- Error while extracting from source 0FIGL_C10 (type InfoProvider)
- ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
- SQL Error: 1652
- Exception CX_RS_STEP_FAILED logged</b>
Can any one help me out from this issue...
Answering getz appreciated,
Warm Regards,
Hemanth AluriHi,
It seems like Table space problem..check with your basis team.
regards,
raju -
Error while extracting from DSO
Hellow ! ! !
Got a error message.
Scenario:
Tried Loading data from one DSO to another DSO through transformation.
But, got a following error message.
Error:
Error while extracting from source 0FIGL_O02 (type DataStore)
Message no. RSBK242
Inconsistent input parameter (parameter: <unknown>, value <unknown>)
Message no. RS_EXCEPTION101
System:
SAP_BW:700
Support Package: SAPKW70016
Regards,
DongSun ChoiGot same results though tried several times.
Updated well from DSO after Changing from transformation to update rule.
Think the transformation is some problem.
Thanks a lot...
dongsun, choi -
Error while extraction from R3 : URGENT
While extracting from R/3 generic datasource(extracted through function module ) i am getting error as :
<b>Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the</b>
<u>But when I am running the FM or the extractor checker it is giving actual records with our any error</u>
Could you please help me what to do ?
No job log in job overview , only it is given <b>Cancelled</b>.Some possibilities:
1. Replicate the data source and then try loading.
2. Check the RFC connection ; may be it is broken.
3. Check the update rules to see it is active.
Ravi Thothadri -
Error while extracting from weblogic binary
Hi,
I am getting the following error when I try to run
the downloaded weblogic binary server910_solaris32.bin
onto my solaris 9 sparc64 machine -
" End-of-central-directory signature not found.
** Error during init, error code = 2."
Any ideas what could be wrong ?
Thanks,
harrynmGot same results though tried several times.
Updated well from DSO after Changing from transformation to update rule.
Think the transformation is some problem.
Thanks a lot...
dongsun, choi -
Hi,
I keep getting the same error while extracting from various BC data sources. The error is about some Time Stamp. It says the time stamp in source is not the same as that in BW.
I have replicated and activated again and again but keep getting that error.
What are the reasons and how can it be fixed?
Thanks
FranA.H.P
if its due to plug in upgrade, will that program solve the problem? Or do we have to ensure the upgrade on the Basis side?
thanks
Fran -
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error While extracting data from FIAA and FIAP
Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
PrasadHello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Error while extracting huge volumes of data from BW
Hi,
we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
Error calling R/3 to get table data: <RFC Error:
Key: TSV_TNEW_PAGE_ALLOC_FAILED
Status: EXCEPTION SYSTEM_FAILURE RAISED
No more storage space available for extending an internal table.
>.
We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
SriThe problem is that you've reached the maximum memory configure for your system.
If this is batch job reconfigure the profile parameter
abap/heap_area_nondia
Markus -
Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.
Hey corrafromlondon,
Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
How to install OS X Yosemite on your Mac - Apple Support
you can find the Yosemite installer app in your Applications folder or Launchpad.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION
Hello all,
i am working on OWB 10gR2 while i try to validate & Deploy according to the following process it was successful but as i tried to view data from dimension i am getting an error which i have mentioned below
Source Table = CUST_MST
Destination Table = CUSTOMER
Dimension = CUSTOMER
Mapping = CUSTOMER_MAP
Validate Table CUST_MAP.
Validate Table CUSTOMER.
Validate Dimension CUSTOMER.
Validate Mapping CUSTOMER_MAP.
Deploy table CUSTOMER.
Deploy mapping CUSTOMER_MAP.
Deploy dimension CUSTOMER (configured => Deploy All).
Deploy table CUSTOMER.
Deploy sequence <CUSTOMER_SEQ>
Deploy mapping CUSTOMER_MAP.
Deploy dimension CUSTOMER (configured => Deploy All).
Start mapping to load table CUSTOMER.
After this i am getting an error while i tried to view the data in the dimension
ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION DATAVIEWER
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBANot sure if it's valid to have a dimension with 1 hierarchy and 1 level in that hierarchy. The hierarchy may have to have at least 2 levels. If you want the configuration of a dimension with 1 hierarchy and 1 level, CWM2 may want you to omit the hierarchy, thus creating the dimension with only 1 level.
-
Error while extracting the data in R/3 production system,
Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issueIt´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus -
Hello Experts,
One user is getting an error while extract DME (Payment File) from customized transaction. Other users are able to save the file on desired location.
Error: C:\AB\filename.TXT not allowed in subscreens (Screen: )
Please let me how to solve this issue.
Thanks in advance.
Regards,
JAClosed Not Answered
-
Error while extracting 0FI_GL_30 - Message RJ012
Hi All,
I am extracting Data Source in RSA3.
I am getting the following Error Message.
Error while Extracting Message RJ012
Can Anyone will help in this issue?
Thanks,
MayurPlease check if SAP Note 1006441 is useful to your issue.
Hope this helps!
- Sheen
Maybe you are looking for
-
What's new in Project Siena Beta2
1. A big push on services. Please see S. Somasegar's blog post. You will be able to make apps with modern functionality like social connections, web intelligence, translate and text to speech. Not just read, but also update. Not just static, but dyna
-
MS-6368 Mainboard display Shaking
I have 5 mainboards model MS-6368 socket 370, and they have the same problem with VGA, they show all time shaking the display, I try to put one PCI-vga CARD, and the system don't start-up. Please, if someone help... Thanks Giuseppe Mayorga
-
I have been using a 2nd gen iPod Touch for a while now but I just ordered a new iPhone from Verizon. I'm pretty sure I know how to sync the iPhone from the iPod (though I wouldn't mind suggestions). My main question is, can I keep using both devices
-
Jinitiator installation error: InstallShield has encountered a problem and
Jinitiator installation error: InstallShield has encountered a problem and needs to close. does any one know this? i thought it's installed. but when i run the form, web.show_document doesnt work at all.
-
Song could not be used bc original file could not be found?
song could not be used bc original file could not be found? I uploaded a bunch of cds into itunes a while ago now, and for some reason more than half my library has this error. Is there anyway to solve this without reloading everything???